[Sat Jul 28 21:14:46 2012] Detection parameters:
  Position = (310.9, 289.9) = 23 15 47.51 -2 24 8.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 98.0 +/- 18.5
  Background counts = 94.9
  Rate = 0.002 +/- 0.0004

[Sat Jul 28 21:14:46 2012] Off-axis axis estimate = 1.09'
[Sat Jul 28 23:44:09 2012] Using EEF radius (= 6.98 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 23:44:09 2012] Initial guess for spatial extent in simple fitting = 6.98"
[Sat Jul 28 23:44:09 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.904
[Sat Jul 28 23:44:09 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 6.98"
[Sun Jul 29 00:31:36 2012] fullrun_mos1_xmm0501110101_pi300-10000_cl_pass0_src23.ximg exists
[Sun Jul 29 00:31:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501110101_pi300-10000_cl_pass0_src23.csv
[Sun Jul 29 00:31:36 2012] fullrun_mos1_xmm0501110101_pi300-10000_cl_pass0_src23_1.ximg exists
[Sun Jul 29 00:31:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501110101_pi300-10000_cl_pass0_src23.csv
[Sun Jul 29 00:31:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501110101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501110101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 00:31:37 2012] fullrun_mos1_xmm0501110101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sun Jul 29 00:31:37 2012] fullrun_mos1_xmm0501110101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sun Jul 29 00:31:37 2012] Fit fullrun_mos1_xmm0501110101_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Sun Jul 29 01:02:57 2012] Source 29 is offset by -5.905198 and -7.100514 pixels which is larger than
2 X fitted extent = 1.466294 x 1.466294, not incorporating fit results
[Sun Jul 29 01:02:57 2012] Vigneting correction estimate = 1.000000
[Sun Jul 29 01:02:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 29 01:02:57 2012] Assessing source extent using major
[Sun Jul 29 01:02:57 2012] Source does appear to be extended
[Sun Jul 29 01:02:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 29 03:58:07 2012] Using EEF radius (= 6.98 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 03:58:07 2012] Initial guess for spatial extent in simple fitting = 6.98"
[Sun Jul 29 03:58:07 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.904
[Sun Jul 29 03:58:07 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 6.98"
[Sun Jul 29 04:56:58 2012] fullrun_mos1_xmm0501110101_pi300-10000_cl_pass1_src22.ximg exists
[Sun Jul 29 04:56:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501110101_pi300-10000_cl_pass1_src22.csv
[Sun Jul 29 04:56:58 2012] fullrun_mos1_xmm0501110101_pi300-10000_cl_pass1_src22_1.ximg exists
[Sun Jul 29 04:56:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501110101_pi300-10000_cl_pass1_src22.csv
[Sun Jul 29 04:56:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501110101_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501110101_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 04:56:59 2012] fullrun_mos1_xmm0501110101_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sun Jul 29 04:56:59 2012] fullrun_mos1_xmm0501110101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sun Jul 29 04:56:59 2012] Fit fullrun_mos1_xmm0501110101_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Sun Jul 29 05:26:43 2012] Source 29 is offset by -5.908256 and -7.097433 pixels which is larger than
2 X fitted extent = 1.474271 x 1.474271, not incorporating fit results
[Sun Jul 29 05:26:43 2012] Vigneting correction estimate = 1.000000
[Sun Jul 29 05:26:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 29 05:26:43 2012] Assessing source extent using major
[Sun Jul 29 05:26:43 2012] Source does appear to be extended
[Sun Jul 29 05:26:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 29 08:25:14 2012] XMMSAS src. selection expression = ellipse(26996.849731, 25170.861298, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jul 29 08:25:14 2012] Writing source region out to fullrun_mos1_xmm0501110101_pi300-10000_pass1_cl_src29_src.reg
[Sun Jul 29 08:25:14 2012] Extracting stamp from image fullrun_mos1_xmm0501110101_pi300-10000_cl_sm2.00.img.gz, (273, 252) - (348, 327)
[Sun Jul 29 08:25:14 2012] XMMSAS bgd. selection expression = annulus(26996.849731, 25170.861298, 1087.500000, 2175.000000, X, Y) && !ellipse(27943.510000, 26655.377200, 937.200027, 937.200027, 0.000000, X, Y) && !ellipse(25158.564000, 22664.807000, 394.234411, 297.243209, 6.162795, X, Y) && !ellipse(28485.720000, 26900.648000, 1259.704036, 1259.704036, 0.000000, X, Y) && !ellipse(28682.392426, 28058.582672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29179.671448, 27829.612946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29639.492000, 27431.128960, 1332.432038, 1332.432038, 0.000000, X, Y) && !ellipse(29343.332764, 26086.543732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26513.496338, 26741.921783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26592.592316, 26147.805878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26656.727203, 27393.787231, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 29 08:25:14 2012] Writing fullrun_mos1_xmm0501110101_pi300-10000_pass1_cl_src29.gif
[Sun Jul 29 08:33:07 2012] Mean detx,y = (-1637.37, -80.22) 
[Sun Jul 29 08:33:08 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 29 08:33:16 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 29 08:33:16 2012] Setting source spectrum file to fullrun_mos1_xmm0501110101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sun Jul 29 08:33:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0501110101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sun Jul 29 09:02:42 2012] Not generating rmf since there are only 98 counts
[Sun Jul 29 09:02:42 2012] rmf not generated due to insufficient counts
[Sun Jul 29 09:39:09 2012] Updating aperture counts using extracted products
[Sun Jul 29 09:39:09 2012] Error reading totcts from fullrun_mos1_xmm0501110101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sun Jul 29 09:39:10 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 29 09:39:10 2012] Using photon index=1.80, rate=0.00237, arf fullrun_mos1_xmm0501110101_pi300-10000_pass1_cl_src29.arf
[Sun Jul 29 09:39:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 29 09:39:10 2012] Updating source flux to 2.3e-14
[Sun Jul 29 09:39:12 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting