[Wed May 30 19:58:41 2012] Detection parameters:
  Position = (434.3, 175.2) = 8 36 24.26 6 2 52.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 289.8 +/- 24.4
  Background counts = 65.3
  Rate = 0.004 +/- 0.0003

[Wed May 30 19:58:41 2012] Off-axis axis estimate = 13.30'
[Wed May 30 21:13:41 2012] Using EEF radius (= 13.08 ")to estimate initial spatial extent for simple fitting
[Wed May 30 21:13:41 2012] Initial guess for spatial extent in simple fitting = 13.08"
[Wed May 30 21:13:41 2012] source mask rpix=3.0, npix_max = 49, mask sum = 42, frac = 0.854
[Wed May 30 21:13:41 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 13.08"
[Wed May 30 21:44:14 2012] fullrun_mos2_xmm0501040101_pi300-10000_cl_pass0_src10.ximg exists
[Wed May 30 21:44:14 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0501040101_pi300-10000_cl_pass0_src10.csv
[Wed May 30 21:44:14 2012] fullrun_mos2_xmm0501040101_pi300-10000_cl_pass0_src10_1.ximg exists
[Wed May 30 21:44:14 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0501040101_pi300-10000_cl_pass0_src10.csv
[Wed May 30 21:44:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501040101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501040101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 21:44:14 2012] fullrun_mos2_xmm0501040101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Wed May 30 21:44:14 2012] fullrun_mos2_xmm0501040101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Wed May 30 21:44:14 2012] Fit fullrun_mos2_xmm0501040101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Wed May 30 21:44:26 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 17.402903 pixels away
[Wed May 30 21:44:26 2012] Vigneting correction estimate = 1.000000
[Wed May 30 21:44:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 21:44:26 2012] Assessing source extent using major
[Wed May 30 21:44:26 2012] Source does appear to be extended
[Wed May 30 21:44:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 23:09:39 2012] Using EEF radius (= 13.08 ")to estimate initial spatial extent for simple fitting
[Wed May 30 23:09:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 30 23:09:39 2012] Initial guess for spatial extent in simple fitting = 13.08"
[Wed May 30 23:09:39 2012] source mask rpix=3.0, npix_max = 49, mask sum = 42, frac = 0.854
[Wed May 30 23:09:39 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 13.08"
[Wed May 30 23:42:36 2012] fullrun_mos2_xmm0501040101_pi300-10000_cl_pass1_src9.ximg exists
[Wed May 30 23:42:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501040101_pi300-10000_cl_pass1_src9.csv
[Wed May 30 23:42:36 2012] fullrun_mos2_xmm0501040101_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed May 30 23:42:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501040101_pi300-10000_cl_pass1_src9.csv
[Wed May 30 23:42:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501040101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501040101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 23:42:36 2012] fullrun_mos2_xmm0501040101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed May 30 23:42:36 2012] fullrun_mos2_xmm0501040101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed May 30 23:42:36 2012] Fit fullrun_mos2_xmm0501040101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Wed May 30 23:42:52 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 13.284719 pixels away
[Wed May 30 23:42:52 2012] Vigneting correction estimate = 1.000000
[Wed May 30 23:42:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 23:42:52 2012] Assessing source extent using major
[Wed May 30 23:42:52 2012] Source does appear to be extended
[Wed May 30 23:42:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 01:10:07 2012] XMMSAS src. selection expression = ellipse(37733.687317, 15192.649216, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 31 01:10:07 2012] Writing source region out to fullrun_mos2_xmm0501040101_pi300-10000_pass1_cl_src24_src.reg
[Thu May 31 01:10:07 2012] Extracting stamp from image fullrun_mos2_xmm0501040101_pi300-10000_cl_sm2.00.img.gz, (397, 138) - (472, 213)
[Thu May 31 01:10:07 2012] XMMSAS bgd. selection expression = annulus(37733.687317, 15192.649216, 1087.500000, 2175.000000, X, Y)
[Thu May 31 01:10:07 2012] Writing fullrun_mos2_xmm0501040101_pi300-10000_pass1_cl_src24.gif
[Thu May 31 01:12:47 2012] Mean detx,y = (9134.20, 12213.18) 
[Thu May 31 01:12:49 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 01:13:00 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 01:13:01 2012] Setting source spectrum file to fullrun_mos2_xmm0501040101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Thu May 31 01:13:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0501040101_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Thu May 31 01:29:04 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 31 01:29:04 2012] rmf not generated due to insufficient counts
[Thu May 31 01:36:37 2012] Updating aperture counts using extracted products
[Thu May 31 01:36:37 2012] Error reading totcts from fullrun_mos2_xmm0501040101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Thu May 31 01:36:37 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 01:36:37 2012] Using photon index=1.80, rate=0.00405, arf fullrun_mos2_xmm0501040101_pi300-10000_pass1_cl_src24.arf
[Thu May 31 01:36:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 01:36:37 2012] Updating source flux to 1.5e-13
[Thu May 31 01:37:09 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting