[Wed May 30 19:58:40 2012] Detection parameters:
  Position = (297.2, 111.3) = 8 37 4.25 5 58 17.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1775.6 +/- 53.4
  Background counts = 100.0
  Rate = 0.02 +/- 0.0007

[Wed May 30 19:58:41 2012] Off-axis axis estimate = 13.57'
[Wed May 30 21:13:41 2012] Using EEF radius (= 13.21 ")to estimate initial spatial extent for simple fitting
[Wed May 30 21:13:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 30 21:13:41 2012] Initial guess for spatial extent in simple fitting = 13.21"
[Wed May 30 21:13:41 2012] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.979
[Wed May 30 21:13:41 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 13.21"
[Wed May 30 21:44:14 2012] fullrun_mos2_xmm0501040101_pi300-10000_cl_pass0_src1.ximg exists
[Wed May 30 21:44:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501040101_pi300-10000_cl_pass0_src1.csv
[Wed May 30 21:44:14 2012] fullrun_mos2_xmm0501040101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed May 30 21:44:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501040101_pi300-10000_cl_pass0_src1.csv
[Wed May 30 21:44:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501040101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501040101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 21:44:14 2012] fullrun_mos2_xmm0501040101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed May 30 21:44:14 2012] fullrun_mos2_xmm0501040101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May 30 21:44:14 2012] Fit fullrun_mos2_xmm0501040101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed May 30 21:44:26 2012] Spatial fit model total counts = 2326.510000, observed total counts = 2306.000000
[Wed May 30 21:44:26 2012] Offset between fit and detection position for source 2 = 0.175934 pixels
[Wed May 30 21:44:26 2012] 2335.240000 total counts/ 1295.550000 bgd. counts: snr = 28.885293
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.175934 pixels
  Position = (297.1, 111.4) = 8 37 4.26 5 58 18.3
  Extent = 6.6 (6.3-7.1)", rotation angle = 0
  Source counts = 1039.7 +/- 48.3
  Background counts = 1295.5
  Rate = 0.02 +/- 0.0008
[Wed May 30 21:44:26 2012] Vigneting correction estimate = 1.000000
[Wed May 30 21:44:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 21:44:26 2012] Assessing source extent using major axis lower bound
[Wed May 30 21:44:26 2012] Source does appear to be extended
[Wed May 30 21:44:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 23:09:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 30 23:09:39 2012] Initial guess for spatial extent in simple fitting = 6.65"
[Wed May 30 23:09:39 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.972
[Wed May 30 23:09:39 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.65"
[Wed May 30 23:42:35 2012] fullrun_mos2_xmm0501040101_pi300-10000_cl_pass1_src1.ximg exists
[Wed May 30 23:42:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501040101_pi300-10000_cl_pass1_src1.csv
[Wed May 30 23:42:35 2012] fullrun_mos2_xmm0501040101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed May 30 23:42:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0501040101_pi300-10000_cl_pass1_src1.csv
[Wed May 30 23:42:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0501040101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0501040101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 23:42:36 2012] fullrun_mos2_xmm0501040101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed May 30 23:42:36 2012] fullrun_mos2_xmm0501040101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed May 30 23:42:36 2012] Fit fullrun_mos2_xmm0501040101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed May 30 23:42:52 2012] Spatial fit model total counts = 1696.910000, observed total counts = 1692.000000
[Wed May 30 23:42:52 2012] Offset between fit and detection position for source 2 = 0.018570 pixels
[Wed May 30 23:42:52 2012] 1702.773000 total counts/ 687.953000 bgd. counts: snr = 38.690971
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.018570 pixels
  Position = (297.1, 111.4) = 8 37 4.26 5 58 18.2
  Extent = 6.8 (6.6-6.9)", rotation angle = 0
  Source counts = 1014.8 +/- 41.3
  Background counts = 688.0
  Rate = 0.02 +/- 0.0007
[Wed May 30 23:42:52 2012] Vigneting correction estimate = 1.000000
[Wed May 30 23:42:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 23:42:52 2012] Assessing source extent using major axis lower bound
[Wed May 30 23:42:52 2012] Source does appear to be extended
[Wed May 30 23:42:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 01:10:07 2012] Counts = 1014.820000, rescaling region sizes by 2.000000
[Thu May 31 01:10:07 2012] XMMSAS src. selection expression = ellipse(25803.283760, 9644.352200, 813.276863, 813.276863, 0.000000, X, Y)
[Thu May 31 01:10:07 2012] Writing source region out to fullrun_mos2_xmm0501040101_pi300-10000_pass1_cl_src2_src.reg
[Thu May 31 01:10:07 2012] Extracting stamp from image fullrun_mos2_xmm0501040101_pi300-10000_cl_sm2.00.img.gz, (250, 65) - (344, 158)
[Thu May 31 01:10:07 2012] XMMSAS bgd. selection expression = annulus(25803.283760, 9644.352200, 2710.922878, 5421.845756, X, Y) && !ellipse(30031.627869, 8196.690826, 1740.000000, 1740.000000, 0.000000, X, Y)
[Thu May 31 01:10:07 2012] Writing fullrun_mos2_xmm0501040101_pi300-10000_pass1_cl_src2.gif
[Thu May 31 01:10:12 2012] Mean detx,y = (-3885.97, 13815.44) 
[Thu May 31 01:10:13 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 01:10:50 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 01:10:50 2012] Setting source spectrum file to fullrun_mos2_xmm0501040101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May 31 01:10:50 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0501040101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu May 31 01:36:36 2012] Updating aperture counts using extracted products
[Thu May 31 01:36:36 2012] Error reading totcts from fullrun_mos2_xmm0501040101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May 31 01:36:37 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 01:36:37 2012] Using photon index=1.80, rate=0.0172, arf fullrun_mos2_xmm0501040101_pi300-10000_pass1_cl_src2.arf
[Thu May 31 01:36:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 01:36:37 2012] Updating source flux to 4.3e-13
[Thu May 31 01:37:29 2012] Reading fit data from xmm0501040101/analysis//spectral/fullrun_mos2_xmm0501040101_pi300-10000_pass1_cl_src2_pl.csv
[Thu May 31 01:37:29 2012] Spectral fit parameter nH value = 3.12234e+21
[Thu May 31 01:37:29 2012] Spectral fit parameter PhoIndex value = 1.70858
[Thu May 31 01:37:29 2012] Failed to get F(0.3-8.0) from xmm0501040101/analysis//spectral/fullrun_mos2_xmm0501040101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Thu May 31 01:37:29 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 01:37:29 2012] Using Nh = 3.1e+21, photon index=1.71, rate=0.0172, arf fullrun_mos2_xmm0501040101_pi300-10000_pass1_cl_src2.arf
[Thu May 31 01:37:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 01:37:29 2012] Updating source flux to 5.9e-13