[Wed May 30 19:58:16 2012] Detection parameters:
  Position = (327.2, 301.2) = 8 36 55.50 6 12 4.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 254.0 +/- 24.7
  Background counts = 118.8
  Rate = 0.004 +/- 0.0004

[Wed May 30 19:58:17 2012] Off-axis axis estimate = 2.09'
[Wed May 30 20:50:50 2012] Using EEF radius (= 7.47 ")to estimate initial spatial extent for simple fitting
[Wed May 30 20:50:50 2012] Initial guess for spatial extent in simple fitting = 7.47"
[Wed May 30 20:50:50 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.813
[Wed May 30 20:50:50 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 7.47"
[Wed May 30 21:13:41 2012] fullrun_mos1_xmm0501040101_pi300-10000_cl_pass0_src7.ximg exists
[Wed May 30 21:13:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501040101_pi300-10000_cl_pass0_src7.csv
[Wed May 30 21:13:41 2012] fullrun_mos1_xmm0501040101_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed May 30 21:13:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501040101_pi300-10000_cl_pass0_src7.csv
[Wed May 30 21:13:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501040101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501040101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 21:13:41 2012] fullrun_mos1_xmm0501040101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed May 30 21:13:41 2012] fullrun_mos1_xmm0501040101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed May 30 21:13:41 2012] Fit fullrun_mos1_xmm0501040101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Wed May 30 21:44:22 2012] Source 6 is offset by 5.718747 and 5.685999 pixels which is larger than
2 X fitted extent = 0.861007 x 0.861007, not incorporating fit results
[Wed May 30 21:44:22 2012] Vigneting correction estimate = 1.000000
[Wed May 30 21:44:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 21:44:22 2012] Assessing source extent using major
[Wed May 30 21:44:22 2012] Source does appear to be extended
[Wed May 30 21:44:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 22:39:39 2012] Using EEF radius (= 7.47 ")to estimate initial spatial extent for simple fitting
[Wed May 30 22:39:39 2012] Initial guess for spatial extent in simple fitting = 7.47"
[Wed May 30 22:39:39 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.813
[Wed May 30 22:39:39 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 7.47"
[Wed May 30 23:09:39 2012] fullrun_mos1_xmm0501040101_pi300-10000_cl_pass1_src7.ximg exists
[Wed May 30 23:09:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501040101_pi300-10000_cl_pass1_src7.csv
[Wed May 30 23:09:39 2012] fullrun_mos1_xmm0501040101_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed May 30 23:09:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0501040101_pi300-10000_cl_pass1_src7.csv
[Wed May 30 23:09:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0501040101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0501040101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 23:09:39 2012] fullrun_mos1_xmm0501040101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed May 30 23:09:39 2012] fullrun_mos1_xmm0501040101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed May 30 23:09:39 2012] Fit fullrun_mos1_xmm0501040101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Wed May 30 23:42:47 2012] Source 6 is offset by -6.708172 and -5.141909 pixels which is larger than
2 X fitted extent = 1.768276 x 1.768276, not incorporating fit results
[Wed May 30 23:42:47 2012] Vigneting correction estimate = 1.000000
[Wed May 30 23:42:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 23:42:47 2012] Assessing source extent using major
[Wed May 30 23:42:47 2012] Source does appear to be extended
[Wed May 30 23:42:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 31 00:48:08 2012] XMMSAS src. selection expression = ellipse(28414.869019, 26154.801880, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 31 00:48:08 2012] Writing source region out to fullrun_mos1_xmm0501040101_pi300-10000_pass1_cl_src6_src.reg
[Thu May 31 00:48:08 2012] Extracting stamp from image fullrun_mos1_xmm0501040101_pi300-10000_cl_sm2.00.img.gz, (290, 264) - (365, 339)
[Thu May 31 00:48:08 2012] XMMSAS bgd. selection expression = annulus(28414.869019, 26154.801880, 1087.500000, 2175.000000, X, Y) && !ellipse(29020.432980, 26598.131600, 373.108811, 373.108811, 0.000000, X, Y) && !ellipse(26557.493764, 24086.010874, 468.213655, 306.045254, 357.843915, X, Y)
[Thu May 31 00:48:08 2012] Writing fullrun_mos1_xmm0501040101_pi300-10000_pass1_cl_src6.gif
[Thu May 31 00:50:13 2012] Mean detx,y = (-895.29, -3941.82) 
[Thu May 31 00:50:14 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 31 00:50:22 2012] Binned source spectrum to 10 counts/bin
[Thu May 31 00:50:22 2012] Setting source spectrum file to fullrun_mos1_xmm0501040101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu May 31 00:50:22 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0501040101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu May 31 01:09:13 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 31 01:09:13 2012] rmf not generated due to insufficient counts
[Thu May 31 01:36:36 2012] Updating aperture counts using extracted products
[Thu May 31 01:36:36 2012] Error reading totcts from fullrun_mos1_xmm0501040101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu May 31 01:36:36 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 31 01:36:36 2012] Using photon index=1.80, rate=0.00427, arf fullrun_mos1_xmm0501040101_pi300-10000_pass1_cl_src6.arf
[Thu May 31 01:36:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 31 01:36:36 2012] Updating source flux to 4.6e-14
[Thu May 31 01:36:39 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting