[Thu Mar 15 10:19:49 2012] Detection parameters:
  Position = (299.1, 219.2) = 8 37 27.59 14 50 58.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.1 +/- 12.1
  Background counts = 20.7
  Rate = 0.01 +/- 0.002

[Thu Mar 15 10:19:49 2012] Off-axis axis estimate = 5.75'
[Thu Mar 15 10:22:39 2012] Using EEF radius (= 9.30 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 10:22:39 2012] Initial guess for spatial extent in simple fitting = 9.30"
[Thu Mar 15 10:22:39 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.077
[Thu Mar 15 10:22:39 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 9.30"
[Thu Mar 15 10:45:53 2012] fullrun_pn_xmm0501010101_pi300-10000_cl_pass0_src10.ximg exists
[Thu Mar 15 10:45:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501010101_pi300-10000_cl_pass0_src10.csv
[Thu Mar 15 10:45:53 2012] fullrun_pn_xmm0501010101_pi300-10000_cl_pass0_src10_1.ximg exists
[Thu Mar 15 10:45:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0501010101_pi300-10000_cl_pass0_src10.csv
[Thu Mar 15 10:45:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501010101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501010101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 10:45:53 2012] fullrun_pn_xmm0501010101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Thu Mar 15 10:45:53 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0501010101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Thu Mar 15 10:45:53 2012] fullrun_pn_xmm0501010101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Thu Mar 15 10:45:53 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0501010101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Thu Mar 15 10:45:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0501010101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0501010101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 11:33:53 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 12.613787 pixels away
[Thu Mar 15 11:33:53 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 11:33:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 11:33:53 2012] Assessing source extent using major
[Thu Mar 15 11:33:53 2012] Source does appear to be extended
[Thu Mar 15 11:33:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 11:33:53 2012] Deleting source due to low Poisson probability 0.9