[Thu Mar 22 16:18:19 2012] Detection parameters:
  Position = (324.5, 351.1) = 0 59 13.86 -72 22 33.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 502.9 +/- 32.6
  Background counts = 147.7
  Rate = 0.03 +/- 0.002

[Thu Mar 22 16:18:20 2012] Off-axis axis estimate = 4.26'
[Thu Mar 22 16:23:36 2012] Using EEF radius (= 8.56 ")to estimate initial spatial extent for simple fitting
[Thu Mar 22 16:23:36 2012] Initial guess for spatial extent in simple fitting = 8.56"
[Thu Mar 22 16:23:36 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.026
[Thu Mar 22 16:23:36 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 8.56"
[Thu Mar 22 17:04:17 2012] fullrun_pn_xmm0500980201_pi300-10000_cl_pass0_src10.ximg exists
[Thu Mar 22 17:04:17 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0500980201_pi300-10000_cl_pass0_src10.csv
[Thu Mar 22 17:04:17 2012] fullrun_pn_xmm0500980201_pi300-10000_cl_pass0_src10_1.ximg exists
[Thu Mar 22 17:04:17 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0500980201_pi300-10000_cl_pass0_src10.csv
[Thu Mar 22 17:04:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500980201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500980201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 17:04:17 2012] fullrun_pn_xmm0500980201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Thu Mar 22 17:04:17 2012] fullrun_pn_xmm0500980201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Thu Mar 22 17:04:17 2012] Fit fullrun_pn_xmm0500980201_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Thu Mar 22 18:08:18 2012] Spatial fit model total counts = 1563.600000, observed total counts = 1562.000000
[Thu Mar 22 18:08:18 2012] Offset between fit and detection position for source 10 = 0.199625 pixels
[Thu Mar 22 18:08:18 2012] 1543.825000 total counts/ 1284.440000 bgd. counts: snr = 7.237489
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.199625 pixels
  Position = (324.4, 351.3) = 0 59 13.97 -72 22 32.6
  Extent = 5.0 (4.4-5.7)", rotation angle = 0
  Source counts = 259.4 +/- 39.3
  Background counts = 1284.4
  Rate = 0.01 +/- 0.002
[Thu Mar 22 18:08:18 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 18:08:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 18:08:18 2012] Assessing source extent using major axis lower bound
[Thu Mar 22 18:08:18 2012] Source does appear to be extended
[Thu Mar 22 18:08:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 18:08:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 22 18:08:37 2012] Initial guess for spatial extent in simple fitting = 4.98"
[Thu Mar 22 18:08:37 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.831
[Thu Mar 22 18:08:37 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 4.98"
[Thu Mar 22 18:30:35 2012] fullrun_pn_xmm0500980201_pi300-10000_cl_pass1_src10.ximg exists
[Thu Mar 22 18:30:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500980201_pi300-10000_cl_pass1_src10.csv
[Thu Mar 22 18:30:35 2012] fullrun_pn_xmm0500980201_pi300-10000_cl_pass1_src10_1.ximg exists
[Thu Mar 22 18:30:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500980201_pi300-10000_cl_pass1_src10.csv
[Thu Mar 22 18:30:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500980201_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500980201_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 18:30:35 2012] fullrun_pn_xmm0500980201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Thu Mar 22 18:30:35 2012] fullrun_pn_xmm0500980201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Thu Mar 22 18:30:35 2012] Fit fullrun_pn_xmm0500980201_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Thu Mar 22 19:36:26 2012] Spatial fit model total counts = 1560.940000, observed total counts = 1562.000000
[Thu Mar 22 19:36:26 2012] Offset between fit and detection position for source 10 = 0.002167 pixels
[Thu Mar 22 19:36:26 2012] 1540.347000 total counts/ 1281.600000 bgd. counts: snr = 7.227683
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.002167 pixels
  Position = (324.4, 351.3) = 0 59 13.96 -72 22 32.6
  Extent = 5.0 (4.4-5.7)", rotation angle = 0
  Source counts = 258.7 +/- 39.2
  Background counts = 1281.6
  Rate = 0.01 +/- 0.002
[Thu Mar 22 19:36:26 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 19:36:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 19:36:26 2012] Assessing source extent using major axis lower bound
[Thu Mar 22 19:36:26 2012] Source does appear to be extended
[Thu Mar 22 19:36:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 19:36:43 2012] XMMSAS src. selection expression = ellipse(28175.861000, 30515.977200, 299.058609, 299.058609, 0.000000, X, Y)
[Thu Mar 22 19:36:43 2012] Writing source region out to fullrun_pn_xmm0500980201_pi300-10000_pass1_cl_src10_src.reg
[Thu Mar 22 19:36:43 2012] Extracting stamp from image fullrun_pn_xmm0500980201_pi300-10000_cl_sm2.00.img.gz, (307, 334) - (342, 369)
[Thu Mar 22 19:36:43 2012] XMMSAS bgd. selection expression = annulus(28175.861000, 30515.977200, 498.431014, 996.862029, X, Y) && !ellipse(27567.254600, 29596.223400, 449.290413, 449.290413, 0.000000, X, Y)
[Thu Mar 22 19:36:43 2012] Writing fullrun_pn_xmm0500980201_pi300-10000_pass1_cl_src10.gif
[Thu Mar 22 20:11:32 2012] Mean detx,y = (-281.50, 6532.89) 
[Thu Mar 22 20:11:37 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 20:11:50 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 20:11:50 2012] Setting source spectrum file to fullrun_pn_xmm0500980201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Mar 22 20:11:50 2012] Setting bgd. spectrum file to fullrun_pn_xmm0500980201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu Mar 22 21:23:26 2012] Updating aperture counts using extracted products
[Thu Mar 22 21:23:26 2012] Error reading totcts from fullrun_pn_xmm0500980201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Mar 22 21:23:28 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 21:23:28 2012] Using photon index=1.80, rate=0.0119, arf fullrun_pn_xmm0500980201_pi300-10000_pass1_cl_src10.arf
[Thu Mar 22 21:23:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 21:23:28 2012] Updating source flux to 4.8e-14