[Thu Mar 22 16:19:25 2012] Detection parameters:
  Position = (443.5, 308.0) = 0 57 19.51 -72 25 37.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 521.6 +/- 27.8
  Background counts = 15.4
  Rate = 0.02 +/- 0.001

[Thu Mar 22 16:19:25 2012] Off-axis axis estimate = 10.54'
[Thu Mar 22 17:32:58 2012] Using EEF radius (= 11.70 ")to estimate initial spatial extent for simple fitting
[Thu Mar 22 17:32:58 2012] Initial guess for spatial extent in simple fitting = 11.70"
[Thu Mar 22 17:32:58 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.032
[Thu Mar 22 17:32:58 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 11.70"
[Thu Mar 22 18:08:11 2012] fullrun_mos2_xmm0500980201_pi300-10000_cl_pass0_src5.ximg exists
[Thu Mar 22 18:08:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500980201_pi300-10000_cl_pass0_src5.csv
[Thu Mar 22 18:08:11 2012] fullrun_mos2_xmm0500980201_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Mar 22 18:08:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500980201_pi300-10000_cl_pass0_src5.csv
[Thu Mar 22 18:08:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500980201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500980201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 18:08:12 2012] fullrun_mos2_xmm0500980201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Mar 22 18:08:12 2012] fullrun_mos2_xmm0500980201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Mar 22 18:08:12 2012] Fit fullrun_mos2_xmm0500980201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Mar 22 18:08:26 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 15.535037 pixels away
[Thu Mar 22 18:08:26 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 18:08:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 18:08:26 2012] Assessing source extent using major
[Thu Mar 22 18:08:26 2012] Source does appear to be extended
[Thu Mar 22 18:08:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 18:49:53 2012] Using EEF radius (= 11.70 ")to estimate initial spatial extent for simple fitting
[Thu Mar 22 18:49:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar 22 18:49:53 2012] Initial guess for spatial extent in simple fitting = 11.70"
[Thu Mar 22 18:49:53 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.032
[Thu Mar 22 18:49:53 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 11.70"
[Thu Mar 22 19:36:20 2012] fullrun_mos2_xmm0500980201_pi300-10000_cl_pass1_src5.ximg exists
[Thu Mar 22 19:36:20 2012] fullrun_mos2_xmm0500980201_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu Mar 22 19:36:20 2012] Fit fullrun_mos2_xmm0500980201_pi300-10000_cl_pass1_src5 appears to have run properly
[Thu Mar 22 19:36:20 2012] fullrun_mos2_xmm0500980201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu Mar 22 19:36:20 2012] fullrun_mos2_xmm0500980201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Mar 22 19:36:20 2012] Fit fullrun_mos2_xmm0500980201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Thu Mar 22 19:36:32 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 15.535967 pixels away
[Thu Mar 22 19:36:32 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 19:36:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 19:36:32 2012] Assessing source extent using major
[Thu Mar 22 19:36:32 2012] Source does appear to be extended
[Thu Mar 22 19:36:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 20:53:09 2012] XMMSAS src. selection expression = ellipse(38535.941589, 26751.748047, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Mar 22 20:53:09 2012] Writing source region out to fullrun_mos2_xmm0500980201_pi300-10000_pass1_cl_src6_src.reg
[Thu Mar 22 20:53:09 2012] Extracting stamp from image fullrun_mos2_xmm0500980201_pi300-10000_cl_sm2.00.img.gz, (406, 271) - (481, 346)
[Thu Mar 22 20:53:09 2012] XMMSAS bgd. selection expression = annulus(38535.941589, 26751.748047, 1087.500000, 2175.000000, X, Y)
[Thu Mar 22 20:53:09 2012] Writing fullrun_mos2_xmm0500980201_pi300-10000_pass1_cl_src6.gif
[Thu Mar 22 20:56:26 2012] Mean detx,y = (10965.59, -9613.44) 
[Thu Mar 22 20:56:28 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 20:56:41 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 20:56:41 2012] Setting source spectrum file to fullrun_mos2_xmm0500980201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Mar 22 20:56:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0500980201_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu Mar 22 21:17:31 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Mar 22 21:17:31 2012] rmf not generated due to insufficient counts
[Thu Mar 22 21:23:29 2012] Updating aperture counts using extracted products
[Thu Mar 22 21:23:29 2012] Error reading totcts from fullrun_mos2_xmm0500980201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Mar 22 21:23:30 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 21:23:30 2012] Using photon index=1.80, rate=0.0182, arf fullrun_mos2_xmm0500980201_pi300-10000_pass1_cl_src6.arf
[Thu Mar 22 21:23:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 21:23:30 2012] Updating source flux to 4.8e-13
[Thu Mar 22 21:24:27 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting