[Thu Mar 22 16:18:51 2012] Detection parameters:
  Position = (309.5, 150.8) = 0 59 28.10 -72 37 6.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5108.4 +/- 84.3
  Background counts = 18.3
  Rate = 0.2 +/- 0.003

[Thu Mar 22 16:18:51 2012] Off-axis axis estimate = 10.74'
[Thu Mar 22 17:04:17 2012] Using EEF radius (= 11.80 ")to estimate initial spatial extent for simple fitting
[Thu Mar 22 17:04:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar 22 17:04:17 2012] Initial guess for spatial extent in simple fitting = 11.80"
[Thu Mar 22 17:04:17 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.018
[Thu Mar 22 17:04:17 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.80"
[Thu Mar 22 17:32:58 2012] fullrun_mos1_xmm0500980201_pi300-10000_cl_pass0_src1.ximg exists
[Thu Mar 22 17:32:58 2012] fullrun_mos1_xmm0500980201_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Mar 22 17:32:58 2012] Fit fullrun_mos1_xmm0500980201_pi300-10000_cl_pass0_src1 appears to have run properly
[Thu Mar 22 17:32:58 2012] fullrun_mos1_xmm0500980201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Mar 22 17:32:58 2012] fullrun_mos1_xmm0500980201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Mar 22 17:32:58 2012] Fit fullrun_mos1_xmm0500980201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Mar 22 18:08:21 2012] Spatial fit model total counts = 5145.990000, observed total counts = 5146.000000
[Thu Mar 22 18:08:21 2012] Offset between fit and detection position for source 10 = 0.135628 pixels
[Thu Mar 22 18:08:21 2012] 5160.960000 total counts/ 1207.440000 bgd. counts: snr = 113.776131
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.135628 pixels
  Position = (309.4, 150.6) = 0 59 28.16 -72 37 5.6
  Extent = 6.8 (6.8-6.8)", rotation angle = 0
  Source counts = 3953.5 +/- 71.8
  Background counts = 1207.4
  Rate = 0.1 +/- 0.003
[Thu Mar 22 18:08:21 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 18:08:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 18:08:21 2012] Assessing source extent using major axis lower bound
[Thu Mar 22 18:08:21 2012] Source does appear to be extended
[Thu Mar 22 18:08:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 18:30:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 22 18:30:35 2012] Initial guess for spatial extent in simple fitting = 6.80"
[Thu Mar 22 18:30:35 2012] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.175
[Thu Mar 22 18:30:35 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.80"
[Thu Mar 22 18:49:53 2012] fullrun_mos1_xmm0500980201_pi300-10000_cl_pass1_src1.ximg exists
[Thu Mar 22 18:49:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500980201_pi300-10000_cl_pass1_src1.csv
[Thu Mar 22 18:49:53 2012] fullrun_mos1_xmm0500980201_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Mar 22 18:49:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500980201_pi300-10000_cl_pass1_src1.csv
[Thu Mar 22 18:49:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500980201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500980201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 22 18:49:53 2012] fullrun_mos1_xmm0500980201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Mar 22 18:49:53 2012] fullrun_mos1_xmm0500980201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Mar 22 18:49:53 2012] Fit fullrun_mos1_xmm0500980201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Mar 22 19:36:28 2012] Spatial fit model total counts = 4758.990000, observed total counts = 4759.000000
[Thu Mar 22 19:36:28 2012] Offset between fit and detection position for source 10 = 0.001794 pixels
[Thu Mar 22 19:36:28 2012] 4772.688000 total counts/ 915.078000 bgd. counts: snr = 127.523217
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.001794 pixels
  Position = (309.4, 150.6) = 0 59 28.16 -72 37 5.6
  Extent = 6.7 (6.7-6.7)", rotation angle = 0
  Source counts = 3857.6 +/- 69.1
  Background counts = 915.1
  Rate = 0.1 +/- 0.002
[Thu Mar 22 19:36:28 2012] Vigneting correction estimate = 1.000000
[Thu Mar 22 19:36:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 22 19:36:28 2012] Assessing source extent using major axis lower bound
[Thu Mar 22 19:36:28 2012] Source does appear to be extended
[Thu Mar 22 19:36:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 22 20:36:17 2012] Counts = 3857.610000, rescaling region sizes by 2.000000
[Thu Mar 22 20:36:17 2012] XMMSAS src. selection expression = ellipse(26873.299400, 13057.579200, 805.331459, 805.331459, 0.000000, X, Y)
[Thu Mar 22 20:36:18 2012] Writing source region out to fullrun_mos1_xmm0500980201_pi300-10000_pass1_cl_src10_src.reg
[Thu Mar 22 20:36:18 2012] Extracting stamp from image fullrun_mos1_xmm0500980201_pi300-10000_cl_sm2.00.img.gz, (263, 104) - (356, 197)
[Thu Mar 22 20:36:18 2012] XMMSAS bgd. selection expression = annulus(26873.299400, 13057.579200, 2684.438197, 5368.876394, X, Y)
[Thu Mar 22 20:36:18 2012] Writing fullrun_mos1_xmm0500980201_pi300-10000_pass1_cl_src10.gif
[Thu Mar 22 20:36:23 2012] Mean detx,y = (8557.49, -9543.35) 
[Thu Mar 22 20:36:26 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 22 20:38:09 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 22 20:38:09 2012] Setting source spectrum file to fullrun_mos1_xmm0500980201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Mar 22 20:38:09 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0500980201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu Mar 22 21:23:28 2012] Updating aperture counts using extracted products
[Thu Mar 22 21:23:28 2012] Error reading totcts from fullrun_mos1_xmm0500980201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Mar 22 21:23:28 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 21:23:28 2012] Using photon index=1.80, rate=0.135, arf fullrun_mos1_xmm0500980201_pi300-10000_pass1_cl_src10.arf
[Thu Mar 22 21:23:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 21:23:28 2012] Updating source flux to 3e-12
[Thu Mar 22 21:24:27 2012] Reading fit data from xmm0500980201/analysis//spectral/fullrun_mos1_xmm0500980201_pi300-10000_pass1_cl_src10_pl.csv
[Thu Mar 22 21:24:27 2012] Spectral fit parameter nH value = 3.97634e+21
[Thu Mar 22 21:24:27 2012] Spectral fit parameter PhoIndex value = 1.0865
[Thu Mar 22 21:24:27 2012] Failed to get F(0.3-8.0) from xmm0500980201/analysis//spectral/fullrun_mos1_xmm0500980201_pi300-10000_pass1_cl_src10_pl.csv, possibly due to different flux energy range selected
[Thu Mar 22 21:24:27 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 22 21:24:27 2012] Using Nh = 4e+21, photon index=1.09, rate=0.135, arf fullrun_mos1_xmm0500980201_pi300-10000_pass1_cl_src10.arf
[Thu Mar 22 21:24:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 22 21:24:27 2012] Updating source flux to 5.7e-12