[Tue Dec 27 23:32:46 2011] Detection parameters:
  Position = (169.3, 291.1) = 0 54 48.17 -72 25 43.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.7 +/- 14.6
  Background counts = 43.0
  Rate = 0.007 +/- 0.001

[Tue Dec 27 23:32:47 2011] Off-axis axis estimate = 9.38'
[Tue Dec 27 23:39:38 2011] Using EEF radius (= 11.12 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 23:39:38 2011] Initial guess for spatial extent in simple fitting = 11.12"
[Tue Dec 27 23:39:38 2011] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.964
[Tue Dec 27 23:39:38 2011] Giving source the simple spatial ID 22 for pass 0, mean size = 11.12"
[Wed Dec 28 02:48:23 2011] fullrun_pn_xmm0500980101_pi300-10000_cl_pass0_src22.ximg exists
[Wed Dec 28 02:48:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500980101_pi300-10000_cl_pass0_src22.csv
[Wed Dec 28 02:48:23 2011] fullrun_pn_xmm0500980101_pi300-10000_cl_pass0_src22_1.ximg exists
[Wed Dec 28 02:48:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500980101_pi300-10000_cl_pass0_src22.csv
[Wed Dec 28 02:48:23 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500980101_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500980101_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 02:48:24 2011] fullrun_pn_xmm0500980101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Wed Dec 28 02:48:24 2011] fullrun_pn_xmm0500980101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Wed Dec 28 02:48:24 2011] Fit fullrun_pn_xmm0500980101_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Wed Dec 28 05:44:33 2011] Warning, spatial fit 22 centroid is now closest to src. 26
[Wed Dec 28 05:44:33 2011] Source 22 is offset by -2.190467 and 3.588097 pixels which is larger than
2 X fitted extent = 1.315540 x 1.315540, not incorporating fit results
[Wed Dec 28 05:44:33 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 05:44:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 05:44:33 2011] Assessing source extent using major
[Wed Dec 28 05:44:33 2011] Source does appear to be extended
[Wed Dec 28 05:44:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 05:45:14 2011] Using EEF radius (= 11.12 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 05:45:14 2011] Initial guess for spatial extent in simple fitting = 11.12"
[Wed Dec 28 05:45:14 2011] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.964
[Wed Dec 28 05:45:14 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 11.12"
[Wed Dec 28 08:28:54 2011] fullrun_pn_xmm0500980101_pi300-10000_cl_pass1_src19.ximg exists
[Wed Dec 28 08:28:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500980101_pi300-10000_cl_pass1_src19.csv
[Wed Dec 28 08:28:54 2011] fullrun_pn_xmm0500980101_pi300-10000_cl_pass1_src19_1.ximg exists
[Wed Dec 28 08:28:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500980101_pi300-10000_cl_pass1_src19.csv
[Wed Dec 28 08:28:54 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500980101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500980101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 08:28:55 2011] fullrun_pn_xmm0500980101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Wed Dec 28 08:28:55 2011] fullrun_pn_xmm0500980101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Wed Dec 28 08:28:55 2011] Fit fullrun_pn_xmm0500980101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Wed Dec 28 11:38:14 2011] Spatial fit model total counts = 695.960000, observed total counts = 696.000000
[Wed Dec 28 11:38:14 2011] Offset between fit and detection position for source 22 = 0.250652 pixels
[Wed Dec 28 11:38:14 2011] 692.944100 total counts/ 630.266000 bgd. counts: snr = 2.496628
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.250652 pixels
  Position = (169.3, 291.4) = 0 54 48.24 -72 25 43.6
  Extent = 5.4 (3.5-7.7)", rotation angle = 0
  Source counts = 62.7 +/- 26.3
  Background counts = 630.3
  Rate = 0.003 +/- 0.001
[Wed Dec 28 11:38:15 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 11:38:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 11:38:15 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 11:38:15 2011] Source does appear to be extended
[Wed Dec 28 11:38:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 11:39:06 2011] XMMSAS src. selection expression = ellipse(14676.848400, 25299.032060, 324.801609, 324.801609, 0.000000, X, Y)
[Wed Dec 28 11:39:06 2011] Writing source region out to fullrun_pn_xmm0500980101_pi300-10000_pass1_cl_src22_src.reg
[Wed Dec 28 11:39:06 2011] Extracting stamp from image fullrun_pn_xmm0500980101_pi300-10000_cl_sm2.00.img.gz, (151, 273) - (188, 310)
[Wed Dec 28 11:39:06 2011] XMMSAS bgd. selection expression = annulus(14676.848400, 25299.032060, 541.336016, 1082.672031, X, Y) && !ellipse(14487.353958, 24286.494934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15761.219200, 24184.811000, 419.039212, 419.039212, 0.000000, X, Y) && !ellipse(14042.052000, 23994.268000, 474.246414, 474.246414, 0.000000, X, Y)
[Wed Dec 28 11:39:06 2011] Writing fullrun_pn_xmm0500980101_pi300-10000_pass1_cl_src22.gif
[Wed Dec 28 12:28:43 2011] Mean detx,y = (9415.11, -2646.12) 
[Wed Dec 28 12:28:52 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 12:29:35 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 12:29:36 2011] Setting source spectrum file to fullrun_pn_xmm0500980101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Wed Dec 28 12:29:36 2011] Setting bgd. spectrum file to fullrun_pn_xmm0500980101_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Wed Dec 28 13:56:42 2011] Not generating rmf since there are only 62 counts
[Wed Dec 28 13:56:42 2011] rmf not generated due to insufficient counts
[Wed Dec 28 17:04:13 2011] Updating aperture counts using extracted products
[Wed Dec 28 17:04:13 2011] Error reading totcts from fullrun_pn_xmm0500980101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Wed Dec 28 17:04:18 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 17:04:18 2011] Using photon index=1.80, rate=0.00273, arf fullrun_pn_xmm0500980101_pi300-10000_pass1_cl_src22.arf
[Wed Dec 28 17:04:18 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 17:04:18 2011] Updating source flux to 1.2e-14
[Wed Dec 28 17:07:17 2011] Flag b found in src. 22 procflags, skipping spectral fitting
[Wed Dec 28 17:07:17 2011] Source 22 has fewer than 100.000000 counts, skipping spectral fitting