[Tue Dec 27 23:34:54 2011] Detection parameters:
  Position = (290.8, 408.7) = 0 52 51.46 -72 17 15.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 598.8 +/- 29.8
  Background counts = 9.7
  Rate = 0.04 +/- 0.002

[Tue Dec 27 23:34:56 2011] Off-axis axis estimate = 8.02'
[Wed Dec 28 04:09:12 2011] Using EEF radius (= 10.44 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 04:09:12 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Dec 28 04:09:12 2011] Initial guess for spatial extent in simple fitting = 10.44"
[Wed Dec 28 04:09:12 2011] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.071
[Wed Dec 28 04:09:12 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 10.44"
[Wed Dec 28 05:44:13 2011] fullrun_mos2_xmm0500980101_pi300-10000_cl_pass0_src2.ximg exists
[Wed Dec 28 05:44:13 2011] fullrun_mos2_xmm0500980101_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Dec 28 05:44:13 2011] Fit fullrun_mos2_xmm0500980101_pi300-10000_cl_pass0_src2 appears to have run properly
[Wed Dec 28 05:44:13 2011] fullrun_mos2_xmm0500980101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Dec 28 05:44:13 2011] fullrun_mos2_xmm0500980101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Dec 28 05:44:13 2011] Fit fullrun_mos2_xmm0500980101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Dec 28 05:44:49 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 13.945390 pixels away
[Wed Dec 28 05:44:49 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 05:44:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 05:44:49 2011] Assessing source extent using major
[Wed Dec 28 05:44:49 2011] Source does appear to be extended
[Wed Dec 28 05:44:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 09:58:57 2011] Using EEF radius (= 10.44 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 09:58:57 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Dec 28 09:58:57 2011] Initial guess for spatial extent in simple fitting = 10.44"
[Wed Dec 28 09:58:57 2011] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.071
[Wed Dec 28 09:58:57 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 10.44"
[Wed Dec 28 11:37:54 2011] fullrun_mos2_xmm0500980101_pi300-10000_cl_pass1_src2.ximg exists
[Wed Dec 28 11:37:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500980101_pi300-10000_cl_pass1_src2.csv
[Wed Dec 28 11:37:54 2011] fullrun_mos2_xmm0500980101_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Dec 28 11:37:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500980101_pi300-10000_cl_pass1_src2.csv
[Wed Dec 28 11:37:54 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500980101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500980101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 11:37:54 2011] fullrun_mos2_xmm0500980101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Dec 28 11:37:54 2011] fullrun_mos2_xmm0500980101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Dec 28 11:37:54 2011] Fit fullrun_mos2_xmm0500980101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Dec 28 11:38:38 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 13.237524 pixels away
[Wed Dec 28 11:38:38 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 11:38:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 11:38:38 2011] Assessing source extent using major
[Wed Dec 28 11:38:38 2011] Source does appear to be extended
[Wed Dec 28 11:38:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 16:11:11 2011] XMMSAS src. selection expression = ellipse(25247.904938, 35511.703918, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Dec 28 16:11:11 2011] Writing source region out to fullrun_mos2_xmm0500980101_pi300-10000_pass1_cl_src4_src.reg
[Wed Dec 28 16:11:11 2011] Extracting stamp from image fullrun_mos2_xmm0500980101_pi300-10000_cl_sm2.00.img.gz, (253, 371) - (328, 446)
[Wed Dec 28 16:11:11 2011] XMMSAS bgd. selection expression = annulus(25247.904938, 35511.703918, 1087.500000, 2175.000000, X, Y)
[Wed Dec 28 16:11:11 2011] Writing fullrun_mos2_xmm0500980101_pi300-10000_pass1_cl_src4.gif
[Wed Dec 28 16:11:53 2011] Mean detx,y = (-2539.32, -10467.87) 
[Wed Dec 28 16:11:57 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 16:12:14 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 16:12:15 2011] Setting source spectrum file to fullrun_mos2_xmm0500980101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Dec 28 16:12:15 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0500980101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Dec 28 16:39:15 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Dec 28 16:39:15 2011] rmf not generated due to insufficient counts
[Wed Dec 28 17:04:23 2011] Updating aperture counts using extracted products
[Wed Dec 28 17:04:23 2011] Error reading totcts from fullrun_mos2_xmm0500980101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Dec 28 17:04:25 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 17:04:25 2011] Using photon index=1.80, rate=0.0374, arf fullrun_mos2_xmm0500980101_pi300-10000_pass1_cl_src4.arf
[Wed Dec 28 17:04:25 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 17:04:25 2011] Updating source flux to 6.2e-13
[Wed Dec 28 17:06:35 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting