[Tue Dec 27 23:34:56 2011] Detection parameters:
  Position = (235.6, 472.3) = 0 53 43.81 -72 12 37.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.6 +/- 9.0
  Background counts = 9.4
  Rate = 0.002 +/- 0.0004

[Tue Dec 27 23:34:56 2011] Off-axis axis estimate = 13.40'
[Wed Dec 28 04:09:12 2011] Using EEF radius (= 13.13 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 04:09:12 2011] Initial guess for spatial extent in simple fitting = 13.13"
[Wed Dec 28 04:09:12 2011] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.990
[Wed Dec 28 04:09:12 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 13.13"
[Wed Dec 28 05:44:13 2011] fullrun_mos2_xmm0500980101_pi300-10000_cl_pass0_src20.ximg exists
[Wed Dec 28 05:44:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500980101_pi300-10000_cl_pass0_src20.csv
[Wed Dec 28 05:44:13 2011] fullrun_mos2_xmm0500980101_pi300-10000_cl_pass0_src20_1.ximg exists
[Wed Dec 28 05:44:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500980101_pi300-10000_cl_pass0_src20.csv
[Wed Dec 28 05:44:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500980101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500980101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 05:44:14 2011] fullrun_mos2_xmm0500980101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Wed Dec 28 05:44:14 2011] fullrun_mos2_xmm0500980101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Wed Dec 28 05:44:14 2011] Fit fullrun_mos2_xmm0500980101_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Wed Dec 28 05:44:49 2011] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 13.706371 pixels away
[Wed Dec 28 05:44:49 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 05:44:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 05:44:49 2011] Assessing source extent using major
[Wed Dec 28 05:44:49 2011] Source does appear to be extended
[Wed Dec 28 05:44:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 09:58:57 2011] Using EEF radius (= 13.13 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 09:58:57 2011] Initial guess for spatial extent in simple fitting = 13.13"
[Wed Dec 28 09:58:57 2011] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.990
[Wed Dec 28 09:58:57 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 13.13"
[Wed Dec 28 11:37:54 2011] fullrun_mos2_xmm0500980101_pi300-10000_cl_pass1_src20.ximg exists
[Wed Dec 28 11:37:54 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0500980101_pi300-10000_cl_pass1_src20.csv
[Wed Dec 28 11:37:54 2011] fullrun_mos2_xmm0500980101_pi300-10000_cl_pass1_src20_1.ximg exists
[Wed Dec 28 11:37:54 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0500980101_pi300-10000_cl_pass1_src20.csv
[Wed Dec 28 11:37:54 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500980101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500980101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 11:37:55 2011] fullrun_mos2_xmm0500980101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Wed Dec 28 11:37:55 2011] fullrun_mos2_xmm0500980101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Wed Dec 28 11:37:55 2011] Fit fullrun_mos2_xmm0500980101_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Wed Dec 28 11:38:38 2011] Spatial fit model total counts = 140.954000, observed total counts = 141.000000
[Wed Dec 28 11:38:38 2011] Offset between fit and detection position for source 22 = 1.702047 pixels
[Wed Dec 28 11:38:38 2011] 140.937900 total counts/ 42.482000 bgd. counts: snr = 15.105645
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 1.702047 pixels
  Position = (234.0, 472.9) = 0 53 45.32 -72 12 35.8
  Extent = 17.1 (11.7-23.2)", rotation angle = 0
  Source counts = 98.5 +/- 11.9
  Background counts = 42.5
  Rate = 0.004 +/- 0.0005
[Wed Dec 28 11:38:38 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 11:38:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 11:38:38 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 11:38:38 2011] Source does appear to be extended
[Wed Dec 28 11:38:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 16:11:11 2011] XMMSAS src. selection expression = ellipse(20308.415800, 41092.027520, 1025.394030, 1025.394030, 0.000000, X, Y)
[Wed Dec 28 16:11:11 2011] Writing source region out to fullrun_mos2_xmm0500980101_pi300-10000_pass1_cl_src22_src.reg
[Wed Dec 28 16:11:11 2011] Extracting stamp from image fullrun_mos2_xmm0500980101_pi300-10000_cl_sm2.00.img.gz, (175, 414) - (293, 532)
[Wed Dec 28 16:11:11 2011] XMMSAS bgd. selection expression = annulus(20308.415800, 41092.027520, 1708.990049, 3417.980098, X, Y)
[Wed Dec 28 16:11:11 2011] Writing fullrun_mos2_xmm0500980101_pi300-10000_pass1_cl_src22.gif
[Wed Dec 28 16:25:24 2011] Mean detx,y = (-8936.29, -14089.36) 
[Wed Dec 28 16:25:27 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 16:26:53 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 16:26:53 2011] Setting source spectrum file to fullrun_mos2_xmm0500980101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Wed Dec 28 16:26:53 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0500980101_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Wed Dec 28 17:01:57 2011] Not generating rmf since there are only 98 counts
[Wed Dec 28 17:01:57 2011] rmf not generated due to insufficient counts
[Wed Dec 28 17:04:25 2011] Updating aperture counts using extracted products
[Wed Dec 28 17:04:25 2011] Error reading totcts from fullrun_mos2_xmm0500980101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Wed Dec 28 17:04:27 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 17:04:27 2011] Using photon index=1.80, rate=0.00384, arf fullrun_mos2_xmm0500980101_pi300-10000_pass1_cl_src22.arf
[Wed Dec 28 17:04:27 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 17:04:27 2011] Updating source flux to 9.7e-14
[Wed Dec 28 17:06:35 2011] Source 22 has fewer than 100.000000 counts, skipping spectral fitting