[Tue Dec 27 23:34:54 2011] Detection parameters:
  Position = (339.4, 286.8) = 0 52 4.82 -72 26 6.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 935.1 +/- 37.2
  Background counts = 12.1
  Rate = 0.04 +/- 0.002

[Tue Dec 27 23:34:56 2011] Off-axis axis estimate = 3.08'
[Wed Dec 28 04:09:12 2011] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 04:09:12 2011] Initial guess for spatial extent in simple fitting = 7.97"
[Wed Dec 28 04:09:12 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.919
[Wed Dec 28 04:09:12 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.97"
[Wed Dec 28 05:44:13 2011] fullrun_mos2_xmm0500980101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Dec 28 05:44:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500980101_pi300-10000_cl_pass0_src1.csv
[Wed Dec 28 05:44:13 2011] fullrun_mos2_xmm0500980101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Dec 28 05:44:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500980101_pi300-10000_cl_pass0_src1.csv
[Wed Dec 28 05:44:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500980101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500980101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 05:44:13 2011] fullrun_mos2_xmm0500980101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Dec 28 05:44:13 2011] fullrun_mos2_xmm0500980101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Dec 28 05:44:13 2011] Fit fullrun_mos2_xmm0500980101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Dec 28 05:44:49 2011] Spatial fit model total counts = 908.000000, observed total counts = 908.000000
[Wed Dec 28 05:44:49 2011] Offset between fit and detection position for source 2 = 0.106241 pixels
[Wed Dec 28 05:44:49 2011] 908.938000 total counts/ 289.474000 bgd. counts: snr = 36.409213
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.106241 pixels
  Position = (339.3, 286.7) = 0 52 4.88 -72 26 5.8
  Extent = 4.6 (4.3-5.0)", rotation angle = 0
  Source counts = 619.5 +/- 30.1
  Background counts = 289.5
  Rate = 0.02 +/- 0.001
[Wed Dec 28 05:44:49 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 05:44:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 05:44:49 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 05:44:49 2011] Source does appear to be extended
[Wed Dec 28 05:44:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 09:58:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Dec 28 09:58:57 2011] Initial guess for spatial extent in simple fitting = 4.64"
[Wed Dec 28 09:58:57 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.917
[Wed Dec 28 09:58:57 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 4.64"
[Wed Dec 28 11:37:54 2011] fullrun_mos2_xmm0500980101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Dec 28 11:37:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500980101_pi300-10000_cl_pass1_src1.csv
[Wed Dec 28 11:37:54 2011] fullrun_mos2_xmm0500980101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Dec 28 11:37:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500980101_pi300-10000_cl_pass1_src1.csv
[Wed Dec 28 11:37:54 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500980101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500980101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 11:37:54 2011] fullrun_mos2_xmm0500980101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Dec 28 11:37:54 2011] fullrun_mos2_xmm0500980101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Dec 28 11:37:54 2011] Fit fullrun_mos2_xmm0500980101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Dec 28 11:38:38 2011] Spatial fit model total counts = 905.698000, observed total counts = 908.000000
[Wed Dec 28 11:38:38 2011] Offset between fit and detection position for source 2 = 0.007832 pixels
[Wed Dec 28 11:38:38 2011] 906.613000 total counts/ 288.863000 bgd. counts: snr = 36.346851
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.007832 pixels
  Position = (339.3, 286.7) = 0 52 4.88 -72 26 5.8
  Extent = 4.6 (4.3-5.0)", rotation angle = 0
  Source counts = 617.8 +/- 30.1
  Background counts = 288.9
  Rate = 0.02 +/- 0.001
[Wed Dec 28 11:38:38 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 11:38:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 11:38:38 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 11:38:38 2011] Source does appear to be extended
[Wed Dec 28 11:38:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 16:11:11 2011] XMMSAS src. selection expression = ellipse(29471.152400, 24898.309600, 278.929208, 278.929208, 0.000000, X, Y)
[Wed Dec 28 16:11:11 2011] Writing source region out to fullrun_mos2_xmm0500980101_pi300-10000_pass1_cl_src2_src.reg
[Wed Dec 28 16:11:11 2011] Extracting stamp from image fullrun_mos2_xmm0500980101_pi300-10000_cl_sm2.00.img.gz, (323, 271) - (355, 303)
[Wed Dec 28 16:11:11 2011] XMMSAS bgd. selection expression = annulus(29471.152400, 24898.309600, 464.882013, 929.764027, X, Y)
[Wed Dec 28 16:11:11 2011] Writing fullrun_mos2_xmm0500980101_pi300-10000_pass1_cl_src2.gif
[Wed Dec 28 16:11:18 2011] Mean detx,y = (4884.27, -1813.46) 
[Wed Dec 28 16:11:22 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 16:11:44 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 16:11:44 2011] Setting source spectrum file to fullrun_mos2_xmm0500980101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Dec 28 16:11:44 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0500980101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Dec 28 17:04:22 2011] Updating aperture counts using extracted products
[Wed Dec 28 17:04:23 2011] Error reading totcts from fullrun_mos2_xmm0500980101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Dec 28 17:04:25 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 17:04:25 2011] Using photon index=1.80, rate=0.0241, arf fullrun_mos2_xmm0500980101_pi300-10000_pass1_cl_src2.arf
[Wed Dec 28 17:04:25 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 17:04:25 2011] Updating source flux to 3.8e-13
[Wed Dec 28 17:07:17 2011] Reading fit data from xmm0500980101/analysis//spectral/fullrun_mos2_xmm0500980101_pi300-10000_pass1_cl_src2_pl.csv
[Wed Dec 28 17:07:17 2011] Spectral fit parameter nH value = 4.53015e+21
[Wed Dec 28 17:07:17 2011] Spectral fit parameter PhoIndex value = 1.21214
[Wed Dec 28 17:07:17 2011] Failed to get F(0.3-8.0) from xmm0500980101/analysis//spectral/fullrun_mos2_xmm0500980101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed Dec 28 17:07:17 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 17:07:17 2011] Using Nh = 4.5e+21, photon index=1.21, rate=0.0241, arf fullrun_mos2_xmm0500980101_pi300-10000_pass1_cl_src2.arf
[Wed Dec 28 17:07:17 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 17:07:17 2011] Updating source flux to 6.7e-13