[Tue Dec 27 23:33:46 2011] Detection parameters:
  Position = (249.9, 333.7) = 0 53 30.65 -72 22 41.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 152.6 +/- 16.0
  Background counts = 13.1
  Rate = 0.007 +/- 0.0007

[Tue Dec 27 23:33:47 2011] Off-axis axis estimate = 4.35'
[Wed Dec 28 02:48:24 2011] Using EEF radius (= 8.60 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 02:48:24 2011] Initial guess for spatial extent in simple fitting = 8.60"
[Wed Dec 28 02:48:24 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.018
[Wed Dec 28 02:48:24 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 8.60"
[Wed Dec 28 04:09:12 2011] fullrun_mos1_xmm0500980101_pi300-10000_cl_pass0_src7.ximg exists
[Wed Dec 28 04:09:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500980101_pi300-10000_cl_pass0_src7.csv
[Wed Dec 28 04:09:12 2011] fullrun_mos1_xmm0500980101_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed Dec 28 04:09:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500980101_pi300-10000_cl_pass0_src7.csv
[Wed Dec 28 04:09:12 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500980101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500980101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 04:09:12 2011] fullrun_mos1_xmm0500980101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed Dec 28 04:09:12 2011] fullrun_mos1_xmm0500980101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Dec 28 04:09:12 2011] Fit fullrun_mos1_xmm0500980101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Wed Dec 28 05:44:40 2011] Source 6 is offset by -5.274861 and -8.244797 pixels which is larger than
2 X fitted extent = 0.988846 x 0.988846, not incorporating fit results
[Wed Dec 28 05:44:40 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 05:44:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 05:44:40 2011] Assessing source extent using major
[Wed Dec 28 05:44:40 2011] Source does appear to be extended
[Wed Dec 28 05:44:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 08:28:55 2011] Using EEF radius (= 8.60 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 08:28:55 2011] Initial guess for spatial extent in simple fitting = 8.60"
[Wed Dec 28 08:28:55 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.018
[Wed Dec 28 08:28:55 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 8.60"
[Wed Dec 28 09:58:56 2011] fullrun_mos1_xmm0500980101_pi300-10000_cl_pass1_src7.ximg exists
[Wed Dec 28 09:58:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500980101_pi300-10000_cl_pass1_src7.csv
[Wed Dec 28 09:58:56 2011] fullrun_mos1_xmm0500980101_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed Dec 28 09:58:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500980101_pi300-10000_cl_pass1_src7.csv
[Wed Dec 28 09:58:56 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500980101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500980101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 09:58:57 2011] fullrun_mos1_xmm0500980101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed Dec 28 09:58:57 2011] fullrun_mos1_xmm0500980101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Dec 28 09:58:57 2011] Fit fullrun_mos1_xmm0500980101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Wed Dec 28 11:38:26 2011] Spatial fit model total counts = 280.000000, observed total counts = 280.000000
[Wed Dec 28 11:38:26 2011] Offset between fit and detection position for source 6 = 0.250664 pixels
[Wed Dec 28 11:38:26 2011] 281.282800 total counts/ 193.852000 bgd. counts: snr = 6.279561
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.250664 pixels
  Position = (249.7, 333.6) = 0 53 30.88 -72 22 42.0
  Extent = 4.1 (3.1-5.2)", rotation angle = 0
  Source counts = 87.4 +/- 16.8
  Background counts = 193.9
  Rate = 0.003 +/- 0.0007
[Wed Dec 28 11:38:26 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 11:38:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 11:38:26 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 11:38:26 2011] Source does appear to be extended
[Wed Dec 28 11:38:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 14:58:20 2011] XMMSAS src. selection expression = ellipse(21671.702800, 28972.024400, 247.902007, 247.902007, 0.000000, X, Y)
[Wed Dec 28 14:58:20 2011] Writing source region out to fullrun_mos1_xmm0500980101_pi300-10000_pass1_cl_src6_src.reg
[Wed Dec 28 14:58:20 2011] Extracting stamp from image fullrun_mos1_xmm0500980101_pi300-10000_cl_sm2.00.img.gz, (235, 319) - (264, 348)
[Wed Dec 28 14:58:20 2011] XMMSAS bgd. selection expression = annulus(21671.702800, 28972.024400, 413.170012, 826.340024, X, Y)
[Wed Dec 28 14:58:20 2011] Writing fullrun_mos1_xmm0500980101_pi300-10000_pass1_cl_src6.gif
[Wed Dec 28 15:02:00 2011] Mean detx,y = (-2948.92, 3632.75) 
[Wed Dec 28 15:02:04 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 15:02:27 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 15:02:27 2011] Setting source spectrum file to fullrun_mos1_xmm0500980101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Dec 28 15:02:27 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0500980101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed Dec 28 15:50:13 2011] Not generating rmf since there are only 87 counts
[Wed Dec 28 15:50:13 2011] rmf not generated due to insufficient counts
[Wed Dec 28 17:04:20 2011] Updating aperture counts using extracted products
[Wed Dec 28 17:04:20 2011] Error reading totcts from fullrun_mos1_xmm0500980101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Dec 28 17:04:22 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 17:04:22 2011] Using photon index=1.80, rate=0.00341, arf fullrun_mos1_xmm0500980101_pi300-10000_pass1_cl_src6.arf
[Wed Dec 28 17:04:22 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 17:04:22 2011] Updating source flux to 5.7e-14
[Wed Dec 28 17:04:30 2011] Flag b found in src. 6 procflags, skipping spectral fitting
[Wed Dec 28 17:04:30 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting