[Tue Dec 27 23:33:45 2011] Detection parameters:
  Position = (339.3, 286.8) = 0 52 4.83 -72 26 6.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 894.9 +/- 36.3
  Background counts = 11.6
  Rate = 0.05 +/- 0.002

[Tue Dec 27 23:33:47 2011] Off-axis axis estimate = 3.08'
[Wed Dec 28 02:48:24 2011] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 02:48:24 2011] Initial guess for spatial extent in simple fitting = 7.97"
[Wed Dec 28 02:48:24 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.919
[Wed Dec 28 02:48:24 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.97"
[Wed Dec 28 04:09:12 2011] fullrun_mos1_xmm0500980101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Dec 28 04:09:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500980101_pi300-10000_cl_pass0_src1.csv
[Wed Dec 28 04:09:12 2011] fullrun_mos1_xmm0500980101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Dec 28 04:09:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500980101_pi300-10000_cl_pass0_src1.csv
[Wed Dec 28 04:09:12 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500980101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500980101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 04:09:12 2011] fullrun_mos1_xmm0500980101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Dec 28 04:09:12 2011] fullrun_mos1_xmm0500980101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Dec 28 04:09:12 2011] Fit fullrun_mos1_xmm0500980101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Dec 28 05:44:40 2011] Spatial fit model total counts = 913.000000, observed total counts = 913.000000
[Wed Dec 28 05:44:40 2011] Offset between fit and detection position for source 3 = 0.176771 pixels
[Wed Dec 28 05:44:40 2011] 910.133000 total counts/ 276.380000 bgd. counts: snr = 38.121214
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.176771 pixels
  Position = (339.2, 286.7) = 0 52 4.98 -72 26 5.9
  Extent = 5.4 (5.1-5.8)", rotation angle = 0
  Source counts = 633.8 +/- 30.2
  Background counts = 276.4
  Rate = 0.02 +/- 0.001
[Wed Dec 28 05:44:40 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 05:44:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 05:44:40 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 05:44:40 2011] Source does appear to be extended
[Wed Dec 28 05:44:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 08:28:55 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Dec 28 08:28:55 2011] Initial guess for spatial extent in simple fitting = 5.41"
[Wed Dec 28 08:28:55 2011] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.988
[Wed Dec 28 08:28:55 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.41"
[Wed Dec 28 09:58:56 2011] fullrun_mos1_xmm0500980101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Dec 28 09:58:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500980101_pi300-10000_cl_pass1_src1.csv
[Wed Dec 28 09:58:56 2011] fullrun_mos1_xmm0500980101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Dec 28 09:58:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500980101_pi300-10000_cl_pass1_src1.csv
[Wed Dec 28 09:58:56 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500980101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500980101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 09:58:57 2011] fullrun_mos1_xmm0500980101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Dec 28 09:58:57 2011] fullrun_mos1_xmm0500980101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Dec 28 09:58:57 2011] Fit fullrun_mos1_xmm0500980101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Dec 28 11:38:26 2011] Spatial fit model total counts = 915.991000, observed total counts = 918.000000
[Wed Dec 28 11:38:26 2011] Offset between fit and detection position for source 3 = 0.009690 pixels
[Wed Dec 28 11:38:26 2011] 914.834000 total counts/ 280.105000 bgd. counts: snr = 37.925203
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.009690 pixels
  Position = (339.2, 286.7) = 0 52 4.98 -72 26 5.9
  Extent = 5.4 (5.1-5.8)", rotation angle = 0
  Source counts = 634.7 +/- 30.2
  Background counts = 280.1
  Rate = 0.02 +/- 0.001
[Wed Dec 28 11:38:26 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 11:38:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 11:38:26 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 11:38:26 2011] Source does appear to be extended
[Wed Dec 28 11:38:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 14:58:20 2011] XMMSAS src. selection expression = ellipse(29461.547100, 24896.761400, 326.481609, 326.481609, 0.000000, X, Y)
[Wed Dec 28 14:58:20 2011] Writing source region out to fullrun_mos1_xmm0500980101_pi300-10000_pass1_cl_src3_src.reg
[Wed Dec 28 14:58:20 2011] Extracting stamp from image fullrun_mos1_xmm0500980101_pi300-10000_cl_sm2.00.img.gz, (320, 268) - (358, 305)
[Wed Dec 28 14:58:20 2011] XMMSAS bgd. selection expression = annulus(29461.547100, 24896.761400, 544.136016, 1088.272031, X, Y)
[Wed Dec 28 14:58:20 2011] Writing fullrun_mos1_xmm0500980101_pi300-10000_pass1_cl_src3.gif
[Wed Dec 28 14:58:26 2011] Mean detx,y = (-1570.29, -5053.22) 
[Wed Dec 28 14:58:30 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 14:58:50 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 14:58:51 2011] Setting source spectrum file to fullrun_mos1_xmm0500980101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Dec 28 14:58:51 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0500980101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Dec 28 17:04:19 2011] Updating aperture counts using extracted products
[Wed Dec 28 17:04:19 2011] Error reading totcts from fullrun_mos1_xmm0500980101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Dec 28 17:04:21 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 17:04:21 2011] Using photon index=1.80, rate=0.0247, arf fullrun_mos1_xmm0500980101_pi300-10000_pass1_cl_src3.arf
[Wed Dec 28 17:04:21 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 17:04:21 2011] Updating source flux to 4e-13
[Wed Dec 28 17:06:35 2011] Reading fit data from xmm0500980101/analysis//spectral/fullrun_mos1_xmm0500980101_pi300-10000_pass1_cl_src3_pl.csv
[Wed Dec 28 17:06:35 2011] Spectral fit parameter nH value = 2.50233e+21
[Wed Dec 28 17:06:35 2011] Spectral fit parameter PhoIndex value = 0.981925
[Wed Dec 28 17:06:35 2011] Failed to get F(0.3-8.0) from xmm0500980101/analysis//spectral/fullrun_mos1_xmm0500980101_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Wed Dec 28 17:06:35 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 17:06:35 2011] Using Nh = 2.5e+21, photon index=0.98, rate=0.0247, arf fullrun_mos1_xmm0500980101_pi300-10000_pass1_cl_src3.arf
[Wed Dec 28 17:06:35 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 17:06:35 2011] Updating source flux to 7.4e-13