[Tue Dec 27 23:33:47 2011] Detection parameters:
  Position = (169.5, 290.3) = 0 54 48.04 -72 25 46.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.9 +/- 8.9
  Background counts = 14.5
  Rate = 0.002 +/- 0.0005

[Tue Dec 27 23:33:47 2011] Off-axis axis estimate = 9.37'
[Wed Dec 28 02:48:24 2011] Using EEF radius (= 11.11 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 02:48:24 2011] Initial guess for spatial extent in simple fitting = 11.11"
[Wed Dec 28 02:48:24 2011] source mask rpix=2.6, npix_max = 37, mask sum = 42, frac = 1.125
[Wed Dec 28 02:48:24 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 11.11"
[Wed Dec 28 04:09:12 2011] fullrun_mos1_xmm0500980101_pi300-10000_cl_pass0_src15.ximg exists
[Wed Dec 28 04:09:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500980101_pi300-10000_cl_pass0_src15.csv
[Wed Dec 28 04:09:12 2011] fullrun_mos1_xmm0500980101_pi300-10000_cl_pass0_src15_1.ximg exists
[Wed Dec 28 04:09:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500980101_pi300-10000_cl_pass0_src15.csv
[Wed Dec 28 04:09:12 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500980101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500980101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 04:09:12 2011] fullrun_mos1_xmm0500980101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Wed Dec 28 04:09:12 2011] fullrun_mos1_xmm0500980101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Wed Dec 28 04:09:12 2011] Fit fullrun_mos1_xmm0500980101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Wed Dec 28 05:44:40 2011] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 15.243334 pixels away
[Wed Dec 28 05:44:40 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 05:44:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 05:44:40 2011] Assessing source extent using major
[Wed Dec 28 05:44:40 2011] Source does appear to be extended
[Wed Dec 28 05:44:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 08:28:55 2011] Using EEF radius (= 11.11 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 08:28:55 2011] Initial guess for spatial extent in simple fitting = 11.11"
[Wed Dec 28 08:28:55 2011] source mask rpix=2.6, npix_max = 37, mask sum = 42, frac = 1.125
[Wed Dec 28 08:28:55 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 11.11"
[Wed Dec 28 09:58:57 2011] fullrun_mos1_xmm0500980101_pi300-10000_cl_pass1_src15.ximg exists
[Wed Dec 28 09:58:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500980101_pi300-10000_cl_pass1_src15.csv
[Wed Dec 28 09:58:57 2011] fullrun_mos1_xmm0500980101_pi300-10000_cl_pass1_src15_1.ximg exists
[Wed Dec 28 09:58:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500980101_pi300-10000_cl_pass1_src15.csv
[Wed Dec 28 09:58:57 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500980101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500980101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 09:58:57 2011] fullrun_mos1_xmm0500980101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Wed Dec 28 09:58:57 2011] fullrun_mos1_xmm0500980101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Wed Dec 28 09:58:57 2011] Fit fullrun_mos1_xmm0500980101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Wed Dec 28 11:38:26 2011] Source 18 is offset by -2.055967 and 2.824954 pixels which is larger than
2 X fitted extent = 1.315485 x 1.315485, not incorporating fit results
[Wed Dec 28 11:38:26 2011] Spatial fit model total counts = 186.839000, observed total counts = 185.000000
[Wed Dec 28 11:38:26 2011] Offset between fit and detection position for source 18 = 0.079866 pixels
[Wed Dec 28 11:38:26 2011] 190.199500 total counts/ 166.537000 bgd. counts: snr = 1.833603
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.079866 pixels
  Position = (169.4, 290.4) = 0 54 48.09 -72 25 47.7
  Extent = 3.3 (2.8-4.8)", rotation angle = 0
  Source counts = 23.7 +/- 13.8
  Background counts = 166.5
  Rate = 0.0009 +/- 0.0005
[Wed Dec 28 11:38:26 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 11:38:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 11:38:26 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 11:38:26 2011] Source does appear to be extended
[Wed Dec 28 11:38:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 14:58:20 2011] XMMSAS src. selection expression = ellipse(14691.160000, 25217.495200, 200.618406, 200.618406, 0.000000, X, Y)
[Wed Dec 28 14:58:20 2011] Writing source region out to fullrun_mos1_xmm0500980101_pi300-10000_pass1_cl_src18_src.reg
[Wed Dec 28 14:58:20 2011] Extracting stamp from image fullrun_mos1_xmm0500980101_pi300-10000_cl_sm2.00.img.gz, (158, 279) - (181, 302)
[Wed Dec 28 14:58:20 2011] XMMSAS bgd. selection expression = annulus(14691.160000, 25217.495200, 334.364010, 668.728019, X, Y) && !ellipse(14033.066498, 23981.955109, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Dec 28 14:58:20 2011] Writing fullrun_mos1_xmm0500980101_pi300-10000_pass1_cl_src18.gif
[Wed Dec 28 15:09:41 2011] Mean detx,y = (2829.59, 9042.47) 
[Wed Dec 28 15:09:45 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 15:10:08 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 15:10:09 2011] Setting source spectrum file to fullrun_mos1_xmm0500980101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed Dec 28 15:10:09 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0500980101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Wed Dec 28 16:00:46 2011] Not generating rmf since there are only 23 counts
[Wed Dec 28 16:00:46 2011] rmf not generated due to insufficient counts
[Wed Dec 28 17:04:21 2011] Updating aperture counts using extracted products
[Wed Dec 28 17:04:21 2011] Error reading totcts from fullrun_mos1_xmm0500980101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed Dec 28 17:04:22 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 17:04:22 2011] Using photon index=1.80, rate=0.000922, arf fullrun_mos1_xmm0500980101_pi300-10000_pass1_cl_src18.arf
[Wed Dec 28 17:04:22 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 17:04:22 2011] Updating source flux to 2.2e-14
[Wed Dec 28 17:04:30 2011] Flag b found in src. 18 procflags, skipping spectral fitting
[Wed Dec 28 17:04:30 2011] Source 18 has fewer than 100.000000 counts, skipping spectral fitting