[Sat Mar  3 10:07:41 2012] Detection parameters:
  Position = (416.7, 223.2) = 5 33 43.83 -58 8 50.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 362.5 +/- 24.7
  Background counts = 45.4
  Rate = 0.02 +/- 0.002

[Sat Mar  3 10:07:42 2012] Off-axis axis estimate = 10.16'
[Sat Mar  3 10:09:08 2012] Using EEF radius (= 11.51 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 10:09:08 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Mar  3 10:09:08 2012] Initial guess for spatial extent in simple fitting = 11.51"
[Sat Mar  3 10:09:08 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.910
[Sat Mar  3 10:09:08 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.51"
[Sat Mar  3 11:09:42 2012] fullrun_pn_xmm0500970301_pi300-10000_cl_pass0_src1.ximg exists
[Sat Mar  3 11:09:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500970301_pi300-10000_cl_pass0_src1.csv
[Sat Mar  3 11:09:42 2012] fullrun_pn_xmm0500970301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Mar  3 11:09:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500970301_pi300-10000_cl_pass0_src1.csv
[Sat Mar  3 11:09:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500970301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500970301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 11:09:42 2012] fullrun_pn_xmm0500970301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Mar  3 11:09:42 2012] fullrun_pn_xmm0500970301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Mar  3 11:09:42 2012] Fit fullrun_pn_xmm0500970301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Mar  3 11:25:49 2012] Spatial fit model total counts = 491.764000, observed total counts = 466.000000
[Sat Mar  3 11:25:49 2012] Offset between fit and detection position for source 1 = 0.331930 pixels
[Sat Mar  3 11:25:49 2012] 492.733000 total counts/ 301.406000 bgd. counts: snr = 11.020475
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.331930 pixels
  Position = (416.5, 223.5) = 5 33 43.96 -58 8 49.8
  Extent = 5.6 (4.8-6.4)", rotation angle = 0
  Source counts = 191.3 +/- 22.2
  Background counts = 301.4
  Rate = 0.02 +/- 0.003
[Sat Mar  3 11:25:49 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 11:25:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 11:25:49 2012] Assessing source extent using major axis lower bound
[Sat Mar  3 11:25:49 2012] Source does appear to be extended
[Sat Mar  3 11:25:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar  3 11:25:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Mar  3 11:25:56 2012] Initial guess for spatial extent in simple fitting = 5.58"
[Sat Mar  3 11:25:56 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.707
[Sat Mar  3 11:25:56 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.58"
[Sat Mar  3 12:42:30 2012] fullrun_pn_xmm0500970301_pi300-10000_cl_pass1_src1.ximg exists
[Sat Mar  3 12:42:30 2012] fullrun_pn_xmm0500970301_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Mar  3 12:42:30 2012] Fit fullrun_pn_xmm0500970301_pi300-10000_cl_pass1_src1 appears to have run properly
[Sat Mar  3 12:42:30 2012] fullrun_pn_xmm0500970301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Mar  3 12:42:30 2012] fullrun_pn_xmm0500970301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Mar  3 12:42:30 2012] Fit fullrun_pn_xmm0500970301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Mar  3 12:47:20 2012] Spatial fit model total counts = 396.925000, observed total counts = 386.000000
[Sat Mar  3 12:47:20 2012] Offset between fit and detection position for source 1 = 0.050120 pixels
[Sat Mar  3 12:47:20 2012] 398.481000 total counts/ 217.133000 bgd. counts: snr = 12.306934
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.050120 pixels
  Position = (416.4, 223.5) = 5 33 43.97 -58 8 50.0
  Extent = 5.2 (4.6-6.1)", rotation angle = 0
  Source counts = 181.3 +/- 20.0
  Background counts = 217.1
  Rate = 0.02 +/- 0.002
[Sat Mar  3 12:47:20 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 12:47:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 12:47:20 2012] Assessing source extent using major axis lower bound
[Sat Mar  3 12:47:20 2012] Source does appear to be extended
[Sat Mar  3 12:47:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar  3 12:47:25 2012] XMMSAS src. selection expression = ellipse(36180.999400, 19391.811600, 313.276209, 313.276209, 0.000000, X, Y)
[Sat Mar  3 12:47:25 2012] Writing source region out to fullrun_pn_xmm0500970301_pi300-10000_pass1_cl_src1_src.reg
[Sat Mar  3 12:47:25 2012] Extracting stamp from image fullrun_pn_xmm0500970301_pi300-10000_cl_sm2.00.img.gz, (398, 205) - (434, 241)
[Sat Mar  3 12:47:25 2012] XMMSAS bgd. selection expression = annulus(36180.999400, 19391.811600, 522.127015, 1044.254030, X, Y) && !ellipse(34114.972000, 18019.738000, 1840.888053, 1840.888053, 0.000000, X, Y) && !ellipse(33251.590000, 18905.686000, 3641.616105, 3641.616105, 0.000000, X, Y) && !ellipse(35063.556000, 17017.724000, 1742.672050, 1742.672050, 0.000000, X, Y)
[Sat Mar  3 12:47:25 2012] Writing fullrun_pn_xmm0500970301_pi300-10000_pass1_cl_src1.gif
[Sat Mar  3 12:47:30 2012] Mean detx,y = (2463.98, 13119.74) 
[Sat Mar  3 12:47:31 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar  3 12:47:41 2012] Binned source spectrum to 10 counts/bin
[Sat Mar  3 12:47:41 2012] Setting source spectrum file to fullrun_pn_xmm0500970301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Mar  3 12:47:41 2012] Setting bgd. spectrum file to fullrun_pn_xmm0500970301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Mar  3 14:24:48 2012] Updating aperture counts using extracted products
[Sat Mar  3 14:24:48 2012] Error reading totcts from fullrun_pn_xmm0500970301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Mar  3 14:24:48 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar  3 14:24:48 2012] Using photon index=1.80, rate=0.0213, arf fullrun_pn_xmm0500970301_pi300-10000_pass1_cl_src1.arf
[Sat Mar  3 14:24:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar  3 14:24:48 2012] Updating source flux to 1.5e-13
[Sat Mar  3 14:26:17 2012] Reading fit data from xmm0500970301/analysis//spectral/fullrun_pn_xmm0500970301_pi300-10000_pass1_cl_src1_pl.csv
[Sat Mar  3 14:26:17 2012] Spectral fit parameter nH value = 4.02476e+14
[Sat Mar  3 14:26:17 2012] Spectral fit parameter PhoIndex value = 1.75803
[Sat Mar  3 14:26:17 2012] Failed to get F(0.3-8.0) from xmm0500970301/analysis//spectral/fullrun_pn_xmm0500970301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Mar  3 14:26:17 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar  3 14:26:17 2012] Using Nh = 4e+14, photon index=1.76, rate=0.0213, arf fullrun_pn_xmm0500970301_pi300-10000_pass1_cl_src1.arf
[Sat Mar  3 14:26:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar  3 14:26:17 2012] Updating source flux to 1.5e-13