[Sat Mar  3 10:08:03 2012] Detection parameters:
  Position = (298.4, 334.2) = 5 34 48.82 -58 0 44.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.8 +/- 12.1
  Background counts = 24.3
  Rate = 0.004 +/- 0.0009

[Sat Mar  3 10:08:03 2012] Off-axis axis estimate = 2.59'
[Sat Mar  3 11:12:41 2012] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 11:12:41 2012] Initial guess for spatial extent in simple fitting = 7.72"
[Sat Mar  3 11:12:41 2012] source mask rpix=1.8, npix_max = 20, mask sum = 13, frac = 0.628
[Sat Mar  3 11:12:41 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.72"
[Sat Mar  3 11:25:44 2012] fullrun_mos2_xmm0500970301_pi300-10000_cl_pass0_src10.ximg exists
[Sat Mar  3 11:25:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500970301_pi300-10000_cl_pass0_src10.csv
[Sat Mar  3 11:25:44 2012] fullrun_mos2_xmm0500970301_pi300-10000_cl_pass0_src10_1.ximg exists
[Sat Mar  3 11:25:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500970301_pi300-10000_cl_pass0_src10.csv
[Sat Mar  3 11:25:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500970301_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500970301_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 11:25:44 2012] fullrun_mos2_xmm0500970301_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sat Mar  3 11:25:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500970301_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sat Mar  3 11:25:44 2012] fullrun_mos2_xmm0500970301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Mar  3 11:25:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500970301_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sat Mar  3 11:25:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500970301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500970301_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 11:25:51 2012] Source 9 is offset by -5.251746 and -4.190414 pixels which is larger than
2 X fitted extent = 1.850869 x 1.850869, not incorporating fit results
[Sat Mar  3 11:25:51 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 11:25:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 11:25:51 2012] Assessing source extent using major
[Sat Mar  3 11:25:51 2012] Source does appear to be extended
[Sat Mar  3 11:25:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar  3 11:25:51 2012] Deleting source due to low Poisson probability 0.9