[Sat Mar  3 10:08:03 2012] Detection parameters:
  Position = (399.6, 484.9) = 5 33 53.71 -57 49 51.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.3 +/- 10.4
  Background counts = 15.3
  Rate = 0.003 +/- 0.0006

[Sat Mar  3 10:08:03 2012] Off-axis axis estimate = 15.38'
[Sat Mar  3 11:12:41 2012] Using EEF radius (= 14.12 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 11:12:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Mar  3 11:12:41 2012] Initial guess for spatial extent in simple fitting = 14.12"
[Sat Mar  3 11:12:41 2012] source mask rpix=3.2, npix_max = 56, mask sum = 52, frac = 0.927
[Sat Mar  3 11:12:41 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 14.12"
[Sat Mar  3 11:25:44 2012] fullrun_mos2_xmm0500970301_pi300-10000_cl_pass0_src11.ximg exists
[Sat Mar  3 11:25:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500970301_pi300-10000_cl_pass0_src11.csv
[Sat Mar  3 11:25:44 2012] fullrun_mos2_xmm0500970301_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat Mar  3 11:25:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500970301_pi300-10000_cl_pass0_src11.csv
[Sat Mar  3 11:25:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500970301_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500970301_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 11:25:44 2012] fullrun_mos2_xmm0500970301_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat Mar  3 11:25:44 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0500970301_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sat Mar  3 11:25:44 2012] fullrun_mos2_xmm0500970301_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Mar  3 11:25:44 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0500970301_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sat Mar  3 11:25:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500970301_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500970301_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 11:25:51 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 16.284257 pixels away
[Sat Mar  3 11:25:51 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 11:25:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 11:25:51 2012] Assessing source extent using major
[Sat Mar  3 11:25:51 2012] Source does appear to be extended
[Sat Mar  3 11:25:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar  3 11:25:51 2012] Deleting source due to low Poisson probability 0.9