[Fri Apr  6 15:18:23 2012] Detection parameters:
  Position = (322.5, 258.3) = 10 10 52.44 53 38 17.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 910.2 +/- 40.5
  Background counts = 129.9
  Rate = 0.03 +/- 0.001

[Fri Apr  6 15:18:23 2012] Off-axis axis estimate = 3.39'
[Fri Apr  6 15:21:52 2012] Using EEF radius (= 8.13 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 15:21:52 2012] Initial guess for spatial extent in simple fitting = 8.13"
[Fri Apr  6 15:21:52 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.115
[Fri Apr  6 15:21:52 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.13"
[Fri Apr  6 15:46:37 2012] fullrun_pn_xmm0500940201_pi300-10000_cl_pass0_src3.ximg exists
[Fri Apr  6 15:46:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500940201_pi300-10000_cl_pass0_src3.csv
[Fri Apr  6 15:46:37 2012] fullrun_pn_xmm0500940201_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Apr  6 15:46:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500940201_pi300-10000_cl_pass0_src3.csv
[Fri Apr  6 15:46:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500940201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500940201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 15:46:37 2012] fullrun_pn_xmm0500940201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Apr  6 15:46:37 2012] fullrun_pn_xmm0500940201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Apr  6 15:46:37 2012] Fit fullrun_pn_xmm0500940201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Apr  6 16:43:19 2012] Spatial fit model total counts = 1087.200000, observed total counts = 1087.000000
[Fri Apr  6 16:43:19 2012] Offset between fit and detection position for source 3 = 0.166167 pixels
[Fri Apr  6 16:43:19 2012] 1094.450000 total counts/ 561.123000 bgd. counts: snr = 22.514616
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.166167 pixels
  Position = (322.4, 258.4) = 10 10 52.49 53 38 18.0
  Extent = 5.2 (4.8-5.6)", rotation angle = 0
  Source counts = 533.3 +/- 33.1
  Background counts = 561.1
  Rate = 0.02 +/- 0.001
[Fri Apr  6 16:43:19 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 16:43:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 16:43:19 2012] Assessing source extent using major axis lower bound
[Fri Apr  6 16:43:19 2012] Source does appear to be extended
[Fri Apr  6 16:43:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 16:43:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Apr  6 16:43:31 2012] Initial guess for spatial extent in simple fitting = 5.22"
[Fri Apr  6 16:43:31 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.779
[Fri Apr  6 16:43:31 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.22"
[Fri Apr  6 17:12:54 2012] fullrun_pn_xmm0500940201_pi300-10000_cl_pass1_src3.ximg exists
[Fri Apr  6 17:12:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500940201_pi300-10000_cl_pass1_src3.csv
[Fri Apr  6 17:12:54 2012] fullrun_pn_xmm0500940201_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Apr  6 17:12:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500940201_pi300-10000_cl_pass1_src3.csv
[Fri Apr  6 17:12:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500940201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500940201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 17:12:55 2012] fullrun_pn_xmm0500940201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Apr  6 17:12:55 2012] fullrun_pn_xmm0500940201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Apr  6 17:12:55 2012] Fit fullrun_pn_xmm0500940201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Apr  6 18:12:43 2012] Spatial fit model total counts = 1087.000000, observed total counts = 1087.000000
[Fri Apr  6 18:12:43 2012] Offset between fit and detection position for source 3 = 0.002331 pixels
[Fri Apr  6 18:12:43 2012] 1094.206000 total counts/ 560.037000 bgd. counts: snr = 22.572014
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.002331 pixels
  Position = (322.4, 258.4) = 10 10 52.50 53 38 18.0
  Extent = 5.2 (4.8-5.6)", rotation angle = 0
  Source counts = 534.2 +/- 33.1
  Background counts = 560.0
  Rate = 0.02 +/- 0.001
[Fri Apr  6 18:12:43 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 18:12:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 18:12:43 2012] Assessing source extent using major axis lower bound
[Fri Apr  6 18:12:43 2012] Source does appear to be extended
[Fri Apr  6 18:12:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 18:12:55 2012] XMMSAS src. selection expression = ellipse(27999.073200, 22433.430000, 314.541609, 314.541609, 0.000000, X, Y)
[Fri Apr  6 18:12:55 2012] Writing source region out to fullrun_pn_xmm0500940201_pi300-10000_pass1_cl_src3_src.reg
[Fri Apr  6 18:12:55 2012] Extracting stamp from image fullrun_pn_xmm0500940201_pi300-10000_cl_sm2.00.img.gz, (304, 240) - (340, 276)
[Fri Apr  6 18:12:55 2012] XMMSAS bgd. selection expression = annulus(27999.073200, 22433.430000, 524.236015, 1048.472030, X, Y)
[Fri Apr  6 18:12:55 2012] Writing fullrun_pn_xmm0500940201_pi300-10000_pass1_cl_src3.gif
[Fri Apr  6 18:13:58 2012] Mean detx,y = (-1130.44, -2582.93) 
[Fri Apr  6 18:13:59 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Apr  6 18:14:07 2012] Binned source spectrum to 10 counts/bin
[Fri Apr  6 18:14:08 2012] Setting source spectrum file to fullrun_pn_xmm0500940201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Apr  6 18:14:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0500940201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Apr  6 19:06:28 2012] Updating aperture counts using extracted products
[Fri Apr  6 19:06:28 2012] Error reading totcts from fullrun_pn_xmm0500940201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Apr  6 19:06:28 2012] Calculating source flux in energy range 0.30-8.00
[Fri Apr  6 19:06:28 2012] Using photon index=1.80, rate=0.023, arf fullrun_pn_xmm0500940201_pi300-10000_pass1_cl_src3.arf
[Fri Apr  6 19:06:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Apr  6 19:06:28 2012] Updating source flux to 8.2e-14
[Fri Apr  6 19:07:13 2012] Reading fit data from xmm0500940201/analysis//spectral/fullrun_pn_xmm0500940201_pi300-10000_pass1_cl_src3_pl.csv
[Fri Apr  6 19:07:13 2012] Spectral fit parameter nH value = 4.16386e+21
[Fri Apr  6 19:07:13 2012] Spectral fit parameter PhoIndex value = 5.6763
[Fri Apr  6 19:07:13 2012] Failed to get F(0.3-8.0) from xmm0500940201/analysis//spectral/fullrun_pn_xmm0500940201_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Fri Apr  6 19:07:13 2012] Calculating source flux in energy range 0.30-8.00
[Fri Apr  6 19:07:13 2012] Using Nh = 4.2e+21, photon index=5.68, rate=0.023, arf fullrun_pn_xmm0500940201_pi300-10000_pass1_cl_src3.arf
[Fri Apr  6 19:07:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Apr  6 19:07:13 2012] Updating source flux to 4.6e-14