[Fri Apr  6 15:19:02 2012] Detection parameters:
  Position = (277.7, 404.9) = 10 11 14.37 53 48 56.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 324.3 +/- 26.1
  Background counts = 99.6
  Rate = 0.01 +/- 0.001

[Fri Apr  6 15:19:02 2012] Off-axis axis estimate = 7.87'
[Fri Apr  6 16:11:06 2012] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 16:11:06 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Apr  6 16:11:06 2012] Initial guess for spatial extent in simple fitting = 10.36"
[Fri Apr  6 16:11:06 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.084
[Fri Apr  6 16:11:06 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.36"
[Fri Apr  6 16:43:15 2012] fullrun_mos2_xmm0500940201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Apr  6 16:43:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500940201_pi300-10000_cl_pass0_src1.csv
[Fri Apr  6 16:43:15 2012] fullrun_mos2_xmm0500940201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Apr  6 16:43:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500940201_pi300-10000_cl_pass0_src1.csv
[Fri Apr  6 16:43:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500940201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500940201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 16:43:15 2012] fullrun_mos2_xmm0500940201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Apr  6 16:43:15 2012] fullrun_mos2_xmm0500940201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Apr  6 16:43:15 2012] Fit fullrun_mos2_xmm0500940201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Apr  6 16:43:24 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 13.713573 pixels away
[Fri Apr  6 16:43:24 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 16:43:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 16:43:24 2012] Assessing source extent using major
[Fri Apr  6 16:43:24 2012] Source does appear to be extended
[Fri Apr  6 16:43:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 17:36:39 2012] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 17:36:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Apr  6 17:36:39 2012] Initial guess for spatial extent in simple fitting = 10.36"
[Fri Apr  6 17:36:39 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.084
[Fri Apr  6 17:36:39 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.36"
[Fri Apr  6 18:12:39 2012] fullrun_mos2_xmm0500940201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Apr  6 18:12:39 2012] fullrun_mos2_xmm0500940201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Apr  6 18:12:39 2012] Fit fullrun_mos2_xmm0500940201_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri Apr  6 18:12:39 2012] fullrun_mos2_xmm0500940201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Apr  6 18:12:39 2012] fullrun_mos2_xmm0500940201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Apr  6 18:12:39 2012] Fit fullrun_mos2_xmm0500940201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Apr  6 18:12:48 2012] Spatial fit model total counts = 360.878000, observed total counts = 361.000000
[Fri Apr  6 18:12:48 2012] Offset between fit and detection position for source 3 = 0.465758 pixels
[Fri Apr  6 18:12:48 2012] 361.796000 total counts/ 190.614000 bgd. counts: snr = 12.398830
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.465758 pixels
  Position = (277.3, 404.8) = 10 11 14.60 53 48 54.8
  Extent = 7.8 (5.9-9.2)", rotation angle = 0
  Source counts = 171.2 +/- 19.0
  Background counts = 190.6
  Rate = 0.006 +/- 0.0007
[Fri Apr  6 18:12:48 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 18:12:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 18:12:48 2012] Assessing source extent using major axis lower bound
[Fri Apr  6 18:12:48 2012] Source does appear to be extended
[Fri Apr  6 18:12:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 18:42:16 2012] XMMSAS src. selection expression = ellipse(24075.676420, 35171.045000, 469.713614, 469.713614, 0.000000, X, Y)
[Fri Apr  6 18:42:16 2012] Writing source region out to fullrun_mos2_xmm0500940201_pi300-10000_pass1_cl_src3_src.reg
[Fri Apr  6 18:42:16 2012] Extracting stamp from image fullrun_mos2_xmm0500940201_pi300-10000_cl_sm2.00.img.gz, (250, 378) - (304, 432)
[Fri Apr  6 18:42:16 2012] XMMSAS bgd. selection expression = annulus(24075.676420, 35171.045000, 782.856023, 1565.712045, X, Y)
[Fri Apr  6 18:42:16 2012] Writing fullrun_mos2_xmm0500940201_pi300-10000_pass1_cl_src3.gif
[Fri Apr  6 18:42:18 2012] Mean detx,y = (4127.29, -10589.66) 
[Fri Apr  6 18:42:19 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Apr  6 18:42:23 2012] Binned source spectrum to 10 counts/bin
[Fri Apr  6 18:42:23 2012] Setting source spectrum file to fullrun_mos2_xmm0500940201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Apr  6 18:42:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0500940201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Apr  6 19:06:29 2012] Updating aperture counts using extracted products
[Fri Apr  6 19:06:29 2012] Error reading totcts from fullrun_mos2_xmm0500940201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Apr  6 19:06:30 2012] Calculating source flux in energy range 0.30-8.00
[Fri Apr  6 19:06:30 2012] Using photon index=1.80, rate=0.0061, arf fullrun_mos2_xmm0500940201_pi300-10000_pass1_cl_src3.arf
[Fri Apr  6 19:06:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Apr  6 19:06:30 2012] Updating source flux to 1.2e-13
[Fri Apr  6 19:06:57 2012] Reading fit data from xmm0500940201/analysis//spectral/fullrun_mos2_xmm0500940201_pi300-10000_pass1_cl_src3_pl.csv
[Fri Apr  6 19:06:57 2012] Spectral fit parameter nH value = 5.59718e+21
[Fri Apr  6 19:06:57 2012] Spectral fit parameter PhoIndex value = 1.12212
[Fri Apr  6 19:06:57 2012] Failed to get F(0.3-8.0) from xmm0500940201/analysis//spectral/fullrun_mos2_xmm0500940201_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Fri Apr  6 19:06:57 2012] Calculating source flux in energy range 0.30-8.00
[Fri Apr  6 19:06:57 2012] Using Nh = 5.6e+21, photon index=1.12, rate=0.0061, arf fullrun_mos2_xmm0500940201_pi300-10000_pass1_cl_src3.arf
[Fri Apr  6 19:06:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Apr  6 19:06:57 2012] Updating source flux to 2.3e-13