[Fri Apr  6 15:18:41 2012] Detection parameters:
  Position = (410.2, 120.4) = 10 10 9.75 53 28 16.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 113.0 +/- 20.1
  Background counts = 114.3
  Rate = 0.003 +/- 0.0005

[Fri Apr  6 15:18:41 2012] Off-axis axis estimate = 15.24'
[Fri Apr  6 15:46:38 2012] Using EEF radius (= 14.05 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 15:46:38 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Apr  6 15:46:38 2012] Initial guess for spatial extent in simple fitting = 14.05"
[Fri Apr  6 15:46:38 2012] source mask rpix=3.2, npix_max = 55, mask sum = 51, frac = 0.917
[Fri Apr  6 15:46:38 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 14.05"
[Fri Apr  6 16:11:05 2012] fullrun_mos1_xmm0500940201_pi300-10000_cl_pass0_src10.ximg exists
[Fri Apr  6 16:11:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500940201_pi300-10000_cl_pass0_src10.csv
[Fri Apr  6 16:11:05 2012] fullrun_mos1_xmm0500940201_pi300-10000_cl_pass0_src10_1.ximg exists
[Fri Apr  6 16:11:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500940201_pi300-10000_cl_pass0_src10.csv
[Fri Apr  6 16:11:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500940201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500940201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 16:11:05 2012] fullrun_mos1_xmm0500940201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Fri Apr  6 16:11:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500940201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri Apr  6 16:11:05 2012] fullrun_mos1_xmm0500940201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Apr  6 16:11:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500940201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri Apr  6 16:11:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500940201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500940201_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 16:43:21 2012] Spatial fit model total counts = 203.252000, observed total counts = 169.000000
[Fri Apr  6 16:43:21 2012] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Apr  6 16:43:21 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 16:43:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 16:43:21 2012] Assessing source extent using major
[Fri Apr  6 16:43:21 2012] Source does appear to be extended
[Fri Apr  6 16:43:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Apr  6 17:12:55 2012] Using EEF radius (= 14.05 ")to estimate initial spatial extent for simple fitting
[Fri Apr  6 17:12:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Apr  6 17:12:55 2012] Initial guess for spatial extent in simple fitting = 14.05"
[Fri Apr  6 17:12:55 2012] source mask rpix=3.2, npix_max = 55, mask sum = 51, frac = 0.917
[Fri Apr  6 17:12:55 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 14.05"
[Fri Apr  6 17:36:39 2012] fullrun_mos1_xmm0500940201_pi300-10000_cl_pass1_src10.ximg exists
[Fri Apr  6 17:36:39 2012] fullrun_mos1_xmm0500940201_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri Apr  6 17:36:39 2012] Fit fullrun_mos1_xmm0500940201_pi300-10000_cl_pass1_src10 appears to have run properly
[Fri Apr  6 17:36:39 2012] fullrun_mos1_xmm0500940201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri Apr  6 17:36:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500940201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Fri Apr  6 17:36:39 2012] fullrun_mos1_xmm0500940201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Apr  6 17:36:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500940201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Fri Apr  6 17:36:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500940201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500940201_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Apr  6 18:12:45 2012] Spatial fit model total counts = 180.828000, observed total counts = 169.000000
[Fri Apr  6 18:12:45 2012] Offset between fit and detection position for source 17 = 0.255031 pixels
[Fri Apr  6 18:12:45 2012] 183.989600 total counts/ 137.585000 bgd. counts: snr = 3.956175
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.255031 pixels
  Position = (410.4, 120.6) = 10 10 9.66 53 28 17.5
  Extent = 12.0 (8.9-16.1)", rotation angle = 308 (298-317) degrees
  Source counts = 46.4 +/- 13.6
  Background counts = 137.6
  Rate = 0.002 +/- 0.0005
[Fri Apr  6 18:12:45 2012] Vigneting correction estimate = 1.000000
[Fri Apr  6 18:12:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Apr  6 18:12:45 2012] Assessing source extent using major axis lower bound
[Fri Apr  6 18:12:45 2012] Source does appear to be extended
[Fri Apr  6 18:12:45 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.03
[Fri Apr  6 18:12:45 2012] Source is asymmetric
[Fri Apr  6 18:34:38 2012] XMMSAS src. selection expression = ellipse(35656.168800, 10439.871200, 717.006021, 210.741006, 307.575981, X, Y)
[Fri Apr  6 18:34:38 2012] Writing source region out to fullrun_mos1_xmm0500940201_pi300-10000_pass1_cl_src17_src.reg
[Fri Apr  6 18:34:38 2012] Extracting stamp from image fullrun_mos1_xmm0500940201_pi300-10000_cl_sm2.00.img.gz, (369, 79) - (452, 162)
[Fri Apr  6 18:34:38 2012] XMMSAS bgd. selection expression = annulus(35656.168800, 10439.871200, 1195.010034, 2390.020069, X, Y)
[Fri Apr  6 18:34:38 2012] Writing fullrun_mos1_xmm0500940201_pi300-10000_pass1_cl_src17.gif
[Fri Apr  6 18:36:09 2012] Mean detx,y = (16805.16, -2147.98) 
[Fri Apr  6 18:36:10 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Apr  6 18:36:19 2012] Binned source spectrum to 10 counts/bin
[Fri Apr  6 18:36:19 2012] Setting source spectrum file to fullrun_mos1_xmm0500940201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Fri Apr  6 18:36:19 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0500940201_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Fri Apr  6 18:41:32 2012] Not generating rmf since there are only 46 counts
[Fri Apr  6 18:41:32 2012] rmf not generated due to insufficient counts
[Fri Apr  6 19:06:29 2012] Updating aperture counts using extracted products
[Fri Apr  6 19:06:29 2012] Error reading totcts from fullrun_mos1_xmm0500940201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Fri Apr  6 19:06:29 2012] Calculating source flux in energy range 0.30-8.00
[Fri Apr  6 19:06:29 2012] Using photon index=1.80, rate=0.00168, arf fullrun_mos1_xmm0500940201_pi300-10000_pass1_cl_src17.arf
[Fri Apr  6 19:06:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Apr  6 19:06:29 2012] Updating source flux to 6.6e-14
[Fri Apr  6 19:06:31 2012] Flag p found in src. 17 procflags, skipping spectral fitting
[Fri Apr  6 19:06:31 2012] Source 17 has fewer than 100.000000 counts, skipping spectral fitting