[Thu Nov 24 02:29:14 2011] Detection parameters:
  Position = (477.2, 227.3) = 14 22 5.99 19 31 50.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.1 +/- 16.6
  Background counts = 56.9
  Rate = 0.003 +/- 0.0006

[Thu Nov 24 02:29:14 2011] Off-axis axis estimate = 13.95'
[Thu Nov 24 02:56:10 2011] Using EEF radius (= 13.40 ")to estimate initial spatial extent for simple fitting
[Thu Nov 24 02:56:10 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Nov 24 02:56:10 2011] Initial guess for spatial extent in simple fitting = 13.40"
[Thu Nov 24 02:56:10 2011] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.955
[Thu Nov 24 02:56:10 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 13.40"
[Thu Nov 24 03:07:57 2011] fullrun_mos2_xmm0500910901_pi300-10000_cl_pass0_src7.ximg exists
[Thu Nov 24 03:07:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500910901_pi300-10000_cl_pass0_src7.csv
[Thu Nov 24 03:07:57 2011] fullrun_mos2_xmm0500910901_pi300-10000_cl_pass0_src7_1.ximg exists
[Thu Nov 24 03:07:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500910901_pi300-10000_cl_pass0_src7.csv
[Thu Nov 24 03:07:57 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500910901_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500910901_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Nov 24 03:07:57 2011] fullrun_mos2_xmm0500910901_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Thu Nov 24 03:07:57 2011] fullrun_mos2_xmm0500910901_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Thu Nov 24 03:07:57 2011] Fit fullrun_mos2_xmm0500910901_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Thu Nov 24 03:08:03 2011] Spatial fit model total counts = 98.969200, observed total counts = 99.000000
[Thu Nov 24 03:08:03 2011] Offset between fit and detection position for source 3 = 6.342683 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 6.342683 pixels
  Position = (481.4, 232.1) = 14 22 4.69 19 32 10.6
  Extent = 26.8 (16.6-53.6)", rotation angle = 0
  Source counts = 90.6 +/- 9.5
  Background counts = 0.0
  Rate = 0.006 +/- 0.0006
 Deleting source due to low signal-to-noise ratio