[Thu Jan  5 10:59:20 2012] Detection parameters:
  Position = (107.7, 292.5) = 14 23 59.72 19 36 35.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.4 +/- 12.9
  Background counts = 21.4
  Rate = 0.005 +/- 0.0007

[Thu Jan  5 10:59:20 2012] Off-axis axis estimate = 13.83'
[Thu Jan  5 11:59:27 2012] Using EEF radius (= 13.35 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 11:59:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jan  5 11:59:27 2012] Initial guess for spatial extent in simple fitting = 13.35"
[Thu Jan  5 11:59:27 2012] source mask rpix=3.1, npix_max = 50, mask sum = 39, frac = 0.766
[Thu Jan  5 11:59:27 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 13.35"
[Thu Jan  5 12:18:06 2012] fullrun_mos2_xmm0500910601_pi300-10000_cl_pass0_src5.ximg exists
[Thu Jan  5 12:18:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500910601_pi300-10000_cl_pass0_src5.csv
[Thu Jan  5 12:18:06 2012] fullrun_mos2_xmm0500910601_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Jan  5 12:18:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500910601_pi300-10000_cl_pass0_src5.csv
[Thu Jan  5 12:18:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500910601_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500910601_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 12:18:06 2012] fullrun_mos2_xmm0500910601_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Jan  5 12:18:06 2012] fullrun_mos2_xmm0500910601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Jan  5 12:18:06 2012] Fit fullrun_mos2_xmm0500910601_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Jan  5 12:18:15 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 17.236063 pixels away
[Thu Jan  5 12:18:15 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 12:18:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 12:18:15 2012] Assessing source extent using major
[Thu Jan  5 12:18:15 2012] Source does appear to be extended
[Thu Jan  5 12:18:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 13:15:36 2012] Using EEF radius (= 13.35 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 13:15:36 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jan  5 13:15:36 2012] Initial guess for spatial extent in simple fitting = 13.35"
[Thu Jan  5 13:15:36 2012] source mask rpix=3.1, npix_max = 50, mask sum = 39, frac = 0.766
[Thu Jan  5 13:15:36 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 13.35"
[Thu Jan  5 13:37:17 2012] fullrun_mos2_xmm0500910601_pi300-10000_cl_pass1_src5.ximg exists
[Thu Jan  5 13:37:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500910601_pi300-10000_cl_pass1_src5.csv
[Thu Jan  5 13:37:17 2012] fullrun_mos2_xmm0500910601_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu Jan  5 13:37:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500910601_pi300-10000_cl_pass1_src5.csv
[Thu Jan  5 13:37:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500910601_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500910601_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 13:37:17 2012] fullrun_mos2_xmm0500910601_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu Jan  5 13:37:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500910601_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu Jan  5 13:37:17 2012] fullrun_mos2_xmm0500910601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Jan  5 13:37:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500910601_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu Jan  5 13:37:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500910601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500910601_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 13:37:28 2012] Spatial fit model total counts = 120.730000, observed total counts = 137.000000
[Thu Jan  5 13:37:28 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jan  5 13:37:28 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 13:37:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 13:37:28 2012] Assessing source extent using major
[Thu Jan  5 13:37:28 2012] Source does appear to be extended
[Thu Jan  5 13:37:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 14:12:36 2012] XMMSAS src. selection expression = ellipse(9324.082642, 25396.302490, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jan  5 14:12:36 2012] Writing source region out to fullrun_mos2_xmm0500910601_pi300-10000_pass1_cl_src3_src.reg
[Thu Jan  5 14:12:36 2012] Extracting stamp from image fullrun_mos2_xmm0500910601_pi300-10000_cl_sm2.00.img.gz, (70, 255) - (145, 330)
[Thu Jan  5 14:12:36 2012] XMMSAS bgd. selection expression = annulus(9324.082642, 25396.302490, 1087.500000, 2175.000000, X, Y)
[Thu Jan  5 14:12:36 2012] Writing fullrun_mos2_xmm0500910601_pi300-10000_pass1_cl_src3.gif
[Thu Jan  5 14:14:45 2012] Mean detx,y = (-12875.27, -10357.50) 
[Thu Jan  5 14:14:47 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 14:15:25 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 14:15:25 2012] Setting source spectrum file to fullrun_mos2_xmm0500910601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jan  5 14:15:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0500910601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Jan  5 14:16:59 2012] Not generating rmf since there are only 91 counts
[Thu Jan  5 14:16:59 2012] rmf not generated due to insufficient counts
[Thu Jan  5 14:18:18 2012] Updating aperture counts using extracted products
[Thu Jan  5 14:18:18 2012] Error reading totcts from fullrun_mos2_xmm0500910601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jan  5 14:18:18 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan  5 14:18:18 2012] Using photon index=1.80, rate=0.00481, arf fullrun_mos2_xmm0500910601_pi300-10000_pass1_cl_src3.arf
[Thu Jan  5 14:18:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan  5 14:18:18 2012] Updating source flux to 1.4e-13
[Thu Jan  5 14:18:51 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jan  5 14:18:52 2012] xmm0500910601/analysis//spectral/fullrun_mos2_xmm0500910601_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete