[Thu Jan  5 10:58:44 2012] Detection parameters:
  Position = (108.0, 293.1) = 14 23 59.65 19 36 37.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 114.0 +/- 15.2
  Background counts = 25.6
  Rate = 0.006 +/- 0.0008

[Thu Jan  5 10:58:45 2012] Off-axis axis estimate = 13.82'
[Thu Jan  5 11:35:39 2012] Using EEF radius (= 13.34 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 11:35:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jan  5 11:35:39 2012] Initial guess for spatial extent in simple fitting = 13.34"
[Thu Jan  5 11:35:39 2012] source mask rpix=3.1, npix_max = 50, mask sum = 53, frac = 1.042
[Thu Jan  5 11:35:39 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 13.34"
[Thu Jan  5 11:59:27 2012] fullrun_mos1_xmm0500910601_pi300-10000_cl_pass0_src5.ximg exists
[Thu Jan  5 11:59:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500910601_pi300-10000_cl_pass0_src5.csv
[Thu Jan  5 11:59:27 2012] fullrun_mos1_xmm0500910601_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Jan  5 11:59:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500910601_pi300-10000_cl_pass0_src5.csv
[Thu Jan  5 11:59:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500910601_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500910601_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 11:59:27 2012] fullrun_mos1_xmm0500910601_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Jan  5 11:59:27 2012] fullrun_mos1_xmm0500910601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Jan  5 11:59:27 2012] Fit fullrun_mos1_xmm0500910601_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Jan  5 12:18:13 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 16.758504 pixels away
[Thu Jan  5 12:18:13 2012] Spatial fit model total counts = 141.468000, observed total counts = 166.000000
[Thu Jan  5 12:18:13 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jan  5 12:18:13 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 12:18:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 12:18:13 2012] Assessing source extent using major
[Thu Jan  5 12:18:13 2012] Source does appear to be extended
[Thu Jan  5 12:18:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 12:44:58 2012] Using EEF radius (= 13.34 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 12:44:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jan  5 12:44:58 2012] Initial guess for spatial extent in simple fitting = 13.34"
[Thu Jan  5 12:44:58 2012] source mask rpix=3.1, npix_max = 50, mask sum = 53, frac = 1.042
[Thu Jan  5 12:44:58 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 13.34"
[Thu Jan  5 13:15:35 2012] fullrun_mos1_xmm0500910601_pi300-10000_cl_pass1_src5.ximg exists
[Thu Jan  5 13:15:35 2012] fullrun_mos1_xmm0500910601_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu Jan  5 13:15:35 2012] Fit fullrun_mos1_xmm0500910601_pi300-10000_cl_pass1_src5 appears to have run properly
[Thu Jan  5 13:15:36 2012] fullrun_mos1_xmm0500910601_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu Jan  5 13:15:36 2012] fullrun_mos1_xmm0500910601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Jan  5 13:15:36 2012] Fit fullrun_mos1_xmm0500910601_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Thu Jan  5 13:37:25 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 17.297629 pixels away
[Thu Jan  5 13:37:25 2012] Spatial fit model total counts = 145.195000, observed total counts = 166.000000
[Thu Jan  5 13:37:25 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jan  5 13:37:25 2012] Vigneting correction estimate = 1.000000
[Thu Jan  5 13:37:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan  5 13:37:25 2012] Assessing source extent using major
[Thu Jan  5 13:37:25 2012] Source does appear to be extended
[Thu Jan  5 13:37:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan  5 13:54:40 2012] XMMSAS src. selection expression = ellipse(9343.350189, 25453.436066, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jan  5 13:54:40 2012] Writing source region out to fullrun_mos1_xmm0500910601_pi300-10000_pass1_cl_src3_src.reg
[Thu Jan  5 13:54:40 2012] Extracting stamp from image fullrun_mos1_xmm0500910601_pi300-10000_cl_sm2.00.img.gz, (70, 256) - (145, 331)
[Thu Jan  5 13:54:40 2012] XMMSAS bgd. selection expression = annulus(9343.350189, 25453.436066, 1087.500000, 2175.000000, X, Y) && !ellipse(8713.720612, 24843.429810, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jan  5 13:54:40 2012] Writing fullrun_mos1_xmm0500910601_pi300-10000_pass1_cl_src3.gif
[Thu Jan  5 13:56:10 2012] Mean detx,y = (-10151.23, 12719.87) 
[Thu Jan  5 13:56:12 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jan  5 13:56:44 2012] Binned source spectrum to 10 counts/bin
[Thu Jan  5 13:56:44 2012] Setting source spectrum file to fullrun_mos1_xmm0500910601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jan  5 13:56:44 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0500910601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Jan  5 14:11:51 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jan  5 14:11:51 2012] rmf not generated due to insufficient counts
[Thu Jan  5 14:18:17 2012] Updating aperture counts using extracted products
[Thu Jan  5 14:18:17 2012] Error reading totcts from fullrun_mos1_xmm0500910601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jan  5 14:18:17 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan  5 14:18:17 2012] Using photon index=1.80, rate=0.00609, arf fullrun_mos1_xmm0500910601_pi300-10000_pass1_cl_src3.arf
[Thu Jan  5 14:18:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jan  5 14:18:17 2012] Updating source flux to 1.5e-13
[Thu Jan  5 14:18:20 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting