[Wed Mar 14 10:45:00 2012] Detection parameters:
  Position = (255.9, 305.4) = 2 24 10.29 86 20 21.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.5 +/- 18.7
  Background counts = 104.2
  Rate = 0.003 +/- 0.0007

[Wed Mar 14 10:45:01 2012] Off-axis axis estimate = 3.13'
[Wed Mar 14 10:50:06 2012] Using EEF radius (= 7.99 ")to estimate initial spatial extent for simple fitting
[Wed Mar 14 10:50:06 2012] Initial guess for spatial extent in simple fitting = 7.99"
[Wed Mar 14 10:50:06 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.915
[Wed Mar 14 10:50:06 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 7.99"
[Wed Mar 14 12:13:08 2012] fullrun_pn_xmm0500910101_pi300-10000_cl_pass0_src7.ximg exists
[Wed Mar 14 12:13:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500910101_pi300-10000_cl_pass0_src7.csv
[Wed Mar 14 12:13:08 2012] fullrun_pn_xmm0500910101_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed Mar 14 12:13:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500910101_pi300-10000_cl_pass0_src7.csv
[Wed Mar 14 12:13:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500910101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500910101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 12:13:09 2012] fullrun_pn_xmm0500910101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed Mar 14 12:13:09 2012] fullrun_pn_xmm0500910101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Mar 14 12:13:09 2012] Fit fullrun_pn_xmm0500910101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Wed Mar 14 13:13:08 2012] Source 7 is offset by -6.510513 and -7.447038 pixels which is larger than
2 X fitted extent = 1.328929 x 1.328929, not incorporating fit results
[Wed Mar 14 13:13:08 2012] Vigneting correction estimate = 1.000000
[Wed Mar 14 13:13:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 14 13:13:08 2012] Assessing source extent using major
[Wed Mar 14 13:13:08 2012] Source does appear to be extended
[Wed Mar 14 13:13:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 13:13:29 2012] Using EEF radius (= 7.99 ")to estimate initial spatial extent for simple fitting
[Wed Mar 14 13:13:29 2012] Initial guess for spatial extent in simple fitting = 7.99"
[Wed Mar 14 13:13:29 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.915
[Wed Mar 14 13:13:29 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 7.99"
[Wed Mar 14 14:21:10 2012] fullrun_pn_xmm0500910101_pi300-10000_cl_pass1_src7.ximg exists
[Wed Mar 14 14:21:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500910101_pi300-10000_cl_pass1_src7.csv
[Wed Mar 14 14:21:10 2012] fullrun_pn_xmm0500910101_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed Mar 14 14:21:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500910101_pi300-10000_cl_pass1_src7.csv
[Wed Mar 14 14:21:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500910101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500910101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 14:21:11 2012] fullrun_pn_xmm0500910101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed Mar 14 14:21:11 2012] fullrun_pn_xmm0500910101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Mar 14 14:21:11 2012] Fit fullrun_pn_xmm0500910101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Wed Mar 14 15:23:44 2012] Source 7 is offset by -6.512352 and -7.479865 pixels which is larger than
2 X fitted extent = 1.415269 x 1.415269, not incorporating fit results
[Wed Mar 14 15:23:44 2012] Vigneting correction estimate = 1.000000
[Wed Mar 14 15:23:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 14 15:23:44 2012] Assessing source extent using major
[Wed Mar 14 15:23:44 2012] Source does appear to be extended
[Wed Mar 14 15:23:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 15:24:03 2012] XMMSAS src. selection expression = ellipse(22211.775391, 26521.543732, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 14 15:24:03 2012] Writing source region out to fullrun_pn_xmm0500910101_pi300-10000_pass1_cl_src7_src.reg
[Wed Mar 14 15:24:03 2012] Extracting stamp from image fullrun_pn_xmm0500910101_pi300-10000_cl_sm2.00.img.gz, (218, 268) - (293, 343)
[Wed Mar 14 15:24:03 2012] XMMSAS bgd. selection expression = annulus(22211.775391, 26521.543732, 1087.500000, 2175.000000, X, Y) && !ellipse(23320.030800, 25238.215200, 416.142412, 416.142412, 0.000000, X, Y) && !ellipse(23316.948000, 26644.524000, 1077.896031, 1077.896031, 0.000000, X, Y) && !ellipse(24041.295013, 26150.362671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23430.502000, 26646.880000, 1154.496033, 1154.496033, 0.000000, X, Y) && !ellipse(24043.490000, 25136.274000, 384.279211, 384.279211, 0.000000, X, Y) && !ellipse(20627.317400, 24275.662400, 356.785610, 356.785610, 0.000000, X, Y)
[Wed Mar 14 15:24:03 2012] Writing fullrun_pn_xmm0500910101_pi300-10000_pass1_cl_src7.gif
[Wed Mar 14 15:31:00 2012] Mean detx,y = (2268.32, -89.97) 
[Wed Mar 14 15:31:04 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 14 15:31:55 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 14 15:31:56 2012] Setting source spectrum file to fullrun_pn_xmm0500910101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Mar 14 15:31:56 2012] Setting bgd. spectrum file to fullrun_pn_xmm0500910101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Wed Mar 14 16:05:03 2012] Not generating rmf since there are only 80 counts
[Wed Mar 14 16:05:03 2012] rmf not generated due to insufficient counts
[Wed Mar 14 17:12:53 2012] Updating aperture counts using extracted products
[Wed Mar 14 17:12:53 2012] Error reading totcts from fullrun_pn_xmm0500910101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Mar 14 17:12:54 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 14 17:12:54 2012] Using photon index=1.80, rate=0.00309, arf fullrun_pn_xmm0500910101_pi300-10000_pass1_cl_src7.arf
[Wed Mar 14 17:12:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 14 17:12:54 2012] Updating source flux to 7.8e-15
[Wed Mar 14 17:14:19 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting