[Wed Mar 14 10:46:09 2012] Detection parameters:
  Position = (222.3, 416.8) = 2 26 55.62 86 28 19.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 514.0 +/- 28.5
  Background counts = 62.7
  Rate = 0.03 +/- 0.001

[Wed Mar 14 10:46:09 2012] Off-axis axis estimate = 10.20'
[Wed Mar 14 12:46:47 2012] Using EEF radius (= 11.53 ")to estimate initial spatial extent for simple fitting
[Wed Mar 14 12:46:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar 14 12:46:47 2012] Initial guess for spatial extent in simple fitting = 11.53"
[Wed Mar 14 12:46:47 2012] source mask rpix=2.7, npix_max = 39, mask sum = 35, frac = 0.881
[Wed Mar 14 12:46:47 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.53"
[Wed Mar 14 13:12:59 2012] fullrun_mos2_xmm0500910101_pi300-10000_cl_pass0_src2.ximg exists
[Wed Mar 14 13:12:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500910101_pi300-10000_cl_pass0_src2.csv
[Wed Mar 14 13:12:59 2012] fullrun_mos2_xmm0500910101_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Mar 14 13:12:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500910101_pi300-10000_cl_pass0_src2.csv
[Wed Mar 14 13:12:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500910101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500910101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 13:12:59 2012] fullrun_mos2_xmm0500910101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Mar 14 13:12:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500910101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed Mar 14 13:12:59 2012] fullrun_mos2_xmm0500910101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Mar 14 13:12:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500910101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed Mar 14 13:12:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500910101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500910101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 13:13:16 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 15.349466 pixels away
[Wed Mar 14 13:13:16 2012] Vigneting correction estimate = 1.000000
[Wed Mar 14 13:13:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 14 13:13:16 2012] Assessing source extent using major
[Wed Mar 14 13:13:16 2012] Source does appear to be extended
[Wed Mar 14 13:13:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 14:59:15 2012] Using EEF radius (= 11.53 ")to estimate initial spatial extent for simple fitting
[Wed Mar 14 14:59:15 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar 14 14:59:15 2012] Initial guess for spatial extent in simple fitting = 11.53"
[Wed Mar 14 14:59:15 2012] source mask rpix=2.7, npix_max = 39, mask sum = 35, frac = 0.881
[Wed Mar 14 14:59:15 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 11.53"
[Wed Mar 14 15:23:36 2012] fullrun_mos2_xmm0500910101_pi300-10000_cl_pass1_src2.ximg exists
[Wed Mar 14 15:23:36 2012] fullrun_mos2_xmm0500910101_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Mar 14 15:23:36 2012] Fit fullrun_mos2_xmm0500910101_pi300-10000_cl_pass1_src2 appears to have run properly
[Wed Mar 14 15:23:36 2012] fullrun_mos2_xmm0500910101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Mar 14 15:23:36 2012] fullrun_mos2_xmm0500910101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Mar 14 15:23:36 2012] Fit fullrun_mos2_xmm0500910101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Mar 14 15:23:52 2012] Spatial fit model total counts = 488.042000, observed total counts = 460.000000
[Wed Mar 14 15:23:52 2012] Offset between fit and detection position for source 12 = 0.134716 pixels
[Wed Mar 14 15:23:52 2012] 486.954000 total counts/ 224.824000 bgd. counts: snr = 17.482172
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.134716 pixels
  Position = (222.2, 416.8) = 2 26 56.23 86 28 17.8
  Extent = 5.9 (5.1-6.8)" x 4.0 (3.3-5.3)", rotation angle = 171 (333-0) degrees
  Source counts = 262.1 +/- 22.1
  Background counts = 224.8
  Rate = 0.009 +/- 0.0008
[Wed Mar 14 15:23:52 2012] Vigneting correction estimate = 1.000000
[Wed Mar 14 15:23:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 14 15:23:52 2012] Assessing source extent using major axis lower bound
[Wed Mar 14 15:23:52 2012] Source does appear to be extended
[Wed Mar 14 15:23:52 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.97
[Wed Mar 14 16:56:59 2012] XMMSAS src. selection expression = ellipse(19282.633880, 36216.965040, 354.237610, 239.322607, 171.445112, X, Y)
[Wed Mar 14 16:56:59 2012] Writing source region out to fullrun_mos2_xmm0500910101_pi300-10000_pass1_cl_src12_src.reg
[Wed Mar 14 16:56:59 2012] Extracting stamp from image fullrun_mos2_xmm0500910101_pi300-10000_cl_sm2.00.img.gz, (202, 396) - (243, 437)
[Wed Mar 14 16:56:59 2012] XMMSAS bgd. selection expression = annulus(19282.633880, 36216.965040, 590.396017, 1180.792034, X, Y)
[Wed Mar 14 16:56:59 2012] Writing fullrun_mos2_xmm0500910101_pi300-10000_pass1_cl_src12.gif
[Wed Mar 14 16:57:24 2012] Mean detx,y = (-10129.84, -6320.16) 
[Wed Mar 14 16:57:27 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 14 16:57:47 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 14 16:57:47 2012] Setting source spectrum file to fullrun_mos2_xmm0500910101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed Mar 14 16:57:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0500910101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Wed Mar 14 17:12:56 2012] Updating aperture counts using extracted products
[Wed Mar 14 17:12:56 2012] Error reading totcts from fullrun_mos2_xmm0500910101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed Mar 14 17:12:56 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 14 17:12:56 2012] Using photon index=1.80, rate=0.00948, arf fullrun_mos2_xmm0500910101_pi300-10000_pass1_cl_src12.arf
[Wed Mar 14 17:12:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 14 17:12:56 2012] Updating source flux to 2.3e-13
[Wed Mar 14 17:14:18 2012] Reading fit data from xmm0500910101/analysis//spectral/fullrun_mos2_xmm0500910101_pi300-10000_pass1_cl_src12_pl.csv
[Wed Mar 14 17:14:18 2012] Spectral fit parameter nH value = 1.34791e+21
[Wed Mar 14 17:14:18 2012] Spectral fit parameter PhoIndex value = 2.07569
[Wed Mar 14 17:14:18 2012] Failed to get F(0.3-8.0) from xmm0500910101/analysis//spectral/fullrun_mos2_xmm0500910101_pi300-10000_pass1_cl_src12_pl.csv, possibly due to different flux energy range selected
[Wed Mar 14 17:14:18 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 14 17:14:18 2012] Using Nh = 1.3e+21, photon index=2.08, rate=0.00948, arf fullrun_mos2_xmm0500910101_pi300-10000_pass1_cl_src12.arf
[Wed Mar 14 17:14:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 14 17:14:19 2012] Updating source flux to 2.2e-13