[Wed Mar 14 10:45:30 2012] Detection parameters:
  Position = (277.1, 288.9) = 2 22 33.17 86 19 5.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 275.3 +/- 25.8
  Background counts = 94.8
  Rate = 0.008 +/- 0.0007

[Wed Mar 14 10:45:31 2012] Off-axis axis estimate = 1.69'
[Wed Mar 14 12:13:09 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Wed Mar 14 12:13:09 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Wed Mar 14 12:13:09 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Wed Mar 14 12:13:09 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.27"
[Wed Mar 14 12:46:47 2012] fullrun_mos1_xmm0500910101_pi300-10000_cl_pass0_src5.ximg exists
[Wed Mar 14 12:46:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500910101_pi300-10000_cl_pass0_src5.csv
[Wed Mar 14 12:46:47 2012] fullrun_mos1_xmm0500910101_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Mar 14 12:46:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500910101_pi300-10000_cl_pass0_src5.csv
[Wed Mar 14 12:46:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500910101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500910101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 12:46:47 2012] fullrun_mos1_xmm0500910101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Mar 14 12:46:47 2012] fullrun_mos1_xmm0500910101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Mar 14 12:46:47 2012] Fit fullrun_mos1_xmm0500910101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Mar 14 13:13:12 2012] Spatial fit model total counts = 1419.780000, observed total counts = 1443.000000
[Wed Mar 14 13:13:12 2012] Offset between fit and detection position for source 9 = 8.402470 pixels
[Wed Mar 14 13:13:12 2012] 1340.502000 total counts/ 1102.440000 bgd. counts: snr = 7.169892
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 8.402470 pixels
  Position = (282.6, 282.6) = 2 22 8.13 86 18 38.0
  Extent = 14.5 (14.5-29.1)", rotation angle = 0
  Source counts = 238.1 +/- 36.6
  Background counts = 1102.4
  Rate = 0.009 +/- 0.001
[Wed Mar 14 13:13:12 2012] Vigneting correction estimate = 1.000000
[Wed Mar 14 13:13:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 14 13:13:12 2012] Assessing source extent using major axis lower bound
[Wed Mar 14 13:13:12 2012] Source does appear to be extended
[Wed Mar 14 13:13:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 14:21:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 14 14:21:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar 14 14:21:11 2012] Initial guess for spatial extent in simple fitting = 14.55"
[Wed Mar 14 14:21:11 2012] source mask rpix=3.3, npix_max = 59, mask sum = 49, frac = 0.829
[Wed Mar 14 14:21:11 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 14.55"
[Wed Mar 14 14:59:15 2012] fullrun_mos1_xmm0500910101_pi300-10000_cl_pass1_src5.ximg exists
[Wed Mar 14 14:59:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500910101_pi300-10000_cl_pass1_src5.csv
[Wed Mar 14 14:59:15 2012] fullrun_mos1_xmm0500910101_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Mar 14 14:59:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500910101_pi300-10000_cl_pass1_src5.csv
[Wed Mar 14 14:59:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500910101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500910101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 14 14:59:15 2012] fullrun_mos1_xmm0500910101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Mar 14 14:59:15 2012] fullrun_mos1_xmm0500910101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Mar 14 14:59:15 2012] Fit fullrun_mos1_xmm0500910101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Mar 14 15:23:49 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 14.136599 pixels away
[Wed Mar 14 15:23:49 2012] Vigneting correction estimate = 1.000000
[Wed Mar 14 15:23:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 14 15:23:49 2012] Assessing source extent using major axis lower bound
[Wed Mar 14 15:23:49 2012] Source does appear to be extended
[Wed Mar 14 15:23:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 16:25:23 2012] XMMSAS src. selection expression = ellipse(24541.230000, 24537.002000, 872.940025, 872.940025, 0.000000, X, Y)
[Wed Mar 14 16:25:23 2012] Writing source region out to fullrun_mos1_xmm0500910101_pi300-10000_pass1_cl_src9_src.reg
[Wed Mar 14 16:25:23 2012] Extracting stamp from image fullrun_mos1_xmm0500910101_pi300-10000_cl_sm2.00.img.gz, (232, 232) - (333, 333)
[Wed Mar 14 16:25:23 2012] XMMSAS bgd. selection expression = annulus(24541.230000, 24537.002000, 1454.900042, 2909.800084, X, Y) && !ellipse(23330.246307, 25248.122650, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23357.300000, 26856.924000, 676.461619, 676.461619, 0.000000, X, Y) && !ellipse(27448.295620, 23831.729800, 381.032011, 381.032011, 0.000000, X, Y) && !ellipse(22878.227570, 26121.980408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23762.649689, 26322.639557, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 14 16:25:23 2012] Writing fullrun_mos1_xmm0500910101_pi300-10000_pass1_cl_src9.gif
[Wed Mar 14 16:29:58 2012] Mean detx,y = (517.40, -755.75) 
[Wed Mar 14 16:30:01 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 14 16:30:18 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 14 16:30:19 2012] Setting source spectrum file to fullrun_mos1_xmm0500910101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed Mar 14 16:30:19 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0500910101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Wed Mar 14 17:12:55 2012] Updating aperture counts using extracted products
[Wed Mar 14 17:12:55 2012] Error reading totcts from fullrun_mos1_xmm0500910101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed Mar 14 17:12:55 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 14 17:12:55 2012] Using photon index=1.80, rate=0.00864, arf fullrun_mos1_xmm0500910101_pi300-10000_pass1_cl_src9.arf
[Wed Mar 14 17:12:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 14 17:12:55 2012] Updating source flux to 8.3e-14