[Tue Feb 14 10:11:14 2012] Detection parameters:
  Position = (411.4, 435.2) = 5 42 5.15 -68 14 4.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.8 +/- 11.1
  Background counts = 6.6
  Rate = 0.006 +/- 0.0009

[Tue Feb 14 10:11:14 2012] Off-axis axis estimate = 12.86'
[Tue Feb 14 10:30:01 2012] Using EEF radius (= 12.86 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 10:30:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 14 10:30:01 2012] Initial guess for spatial extent in simple fitting = 12.86"
[Tue Feb 14 10:30:01 2012] source mask rpix=3.0, npix_max = 47, mask sum = 48, frac = 1.005
[Tue Feb 14 10:30:01 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 12.86"
[Tue Feb 14 10:49:09 2012] fullrun_mos2_xmm0500860901_pi300-10000_cl_pass0_src6.ximg exists
[Tue Feb 14 10:49:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500860901_pi300-10000_cl_pass0_src6.csv
[Tue Feb 14 10:49:09 2012] fullrun_mos2_xmm0500860901_pi300-10000_cl_pass0_src6_1.ximg exists
[Tue Feb 14 10:49:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500860901_pi300-10000_cl_pass0_src6.csv
[Tue Feb 14 10:49:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500860901_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500860901_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 10:49:09 2012] fullrun_mos2_xmm0500860901_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Tue Feb 14 10:49:09 2012] fullrun_mos2_xmm0500860901_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Feb 14 10:49:09 2012] Fit fullrun_mos2_xmm0500860901_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Tue Feb 14 10:49:16 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 16.401331 pixels away
[Tue Feb 14 10:49:16 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 10:49:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 10:49:16 2012] Assessing source extent using major
[Tue Feb 14 10:49:16 2012] Source does appear to be extended
[Tue Feb 14 10:49:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 11:02:16 2012] Using EEF radius (= 12.86 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 11:02:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 14 11:02:16 2012] Initial guess for spatial extent in simple fitting = 12.86"
[Tue Feb 14 11:02:16 2012] source mask rpix=3.0, npix_max = 47, mask sum = 48, frac = 1.005
[Tue Feb 14 11:02:16 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 12.86"
[Tue Feb 14 11:22:24 2012] fullrun_mos2_xmm0500860901_pi300-10000_cl_pass1_src6.ximg exists
[Tue Feb 14 11:22:24 2012] fullrun_mos2_xmm0500860901_pi300-10000_cl_pass1_src6_1.ximg exists
[Tue Feb 14 11:22:24 2012] Fit fullrun_mos2_xmm0500860901_pi300-10000_cl_pass1_src6 appears to have run properly
[Tue Feb 14 11:22:24 2012] fullrun_mos2_xmm0500860901_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Tue Feb 14 11:22:24 2012] fullrun_mos2_xmm0500860901_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Tue Feb 14 11:22:24 2012] Fit fullrun_mos2_xmm0500860901_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Tue Feb 14 11:22:31 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 14.605131 pixels away
[Tue Feb 14 11:22:31 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 11:22:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 11:22:31 2012] Assessing source extent using major
[Tue Feb 14 11:22:31 2012] Source does appear to be extended
[Tue Feb 14 11:22:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 14 11:35:03 2012] XMMSAS src. selection expression = ellipse(35739.717834, 37810.484039, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Feb 14 11:35:03 2012] Writing source region out to fullrun_mos2_xmm0500860901_pi300-10000_pass1_cl_src13_src.reg
[Tue Feb 14 11:35:03 2012] Extracting stamp from image fullrun_mos2_xmm0500860901_pi300-10000_cl_sm2.00.img.gz, (374, 398) - (449, 473)
[Tue Feb 14 11:35:03 2012] XMMSAS bgd. selection expression = annulus(35739.717834, 37810.484039, 1087.500000, 2175.000000, X, Y) && !ellipse(36510.507240, 35762.160400, 420.170412, 420.170412, 0.000000, X, Y)
[Tue Feb 14 11:35:03 2012] Writing fullrun_mos2_xmm0500860901_pi300-10000_pass1_cl_src13.gif
[Tue Feb 14 11:36:17 2012] Mean detx,y = (-13658.29, 2499.64) 
[Tue Feb 14 11:36:18 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 14 11:36:27 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 14 11:36:27 2012] Setting source spectrum file to fullrun_mos2_xmm0500860901_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue Feb 14 11:36:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0500860901_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Tue Feb 14 11:42:54 2012] Not generating rmf since there are only 69 counts
[Tue Feb 14 11:42:54 2012] rmf not generated due to insufficient counts
[Tue Feb 14 11:43:39 2012] Updating aperture counts using extracted products
[Tue Feb 14 11:43:39 2012] Error reading totcts from fullrun_mos2_xmm0500860901_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue Feb 14 11:43:40 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 14 11:43:40 2012] Using photon index=1.80, rate=0.00562, arf fullrun_mos2_xmm0500860901_pi300-10000_pass1_cl_src13.arf
[Tue Feb 14 11:43:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 14 11:43:40 2012] Updating source flux to 1.3e-13
[Tue Feb 14 11:43:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting