[Sat Mar 31 00:29:23 2012] Detection parameters:
  Position = (310.8, 278.2) = 5 43 34.49 -68 22 22.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7060.3 +/- 99.7
  Background counts = 25.7
  Rate = 0.4 +/- 0.005

[Sat Mar 31 00:29:24 2012] Off-axis axis estimate = 1.72'
[Sat Mar 31 01:07:48 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Mar 31 01:07:48 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Mar 31 01:07:48 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Sat Mar 31 01:07:48 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sat Mar 31 01:31:47 2012] fullrun_mos2_xmm0500860601_pi300-10000_cl_pass0_src1.ximg exists
[Sat Mar 31 01:31:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500860601_pi300-10000_cl_pass0_src1.csv
[Sat Mar 31 01:31:47 2012] fullrun_mos2_xmm0500860601_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Mar 31 01:31:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500860601_pi300-10000_cl_pass0_src1.csv
[Sat Mar 31 01:31:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500860601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500860601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 31 01:31:48 2012] fullrun_mos2_xmm0500860601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Mar 31 01:31:48 2012] fullrun_mos2_xmm0500860601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Mar 31 01:31:48 2012] Fit fullrun_mos2_xmm0500860601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Mar 31 01:31:58 2012] Spatial fit model total counts = 6407.130000, observed total counts = 6182.000000
[Sat Mar 31 01:31:58 2012] Offset between fit and detection position for source 2 = 0.178827 pixels
[Sat Mar 31 01:31:58 2012] 6390.000000 total counts/ 1749.970000 bgd. counts: snr = 110.918883
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.178827 pixels
  Position = (310.8, 278.4) = 5 43 34.49 -68 22 21.9
  Extent = 5.1 (5.0-5.2)", rotation angle = 0
  Source counts = 4640.0 +/- 79.9
  Background counts = 1750.0
  Rate = 0.2 +/- 0.004
[Sat Mar 31 01:31:58 2012] Vigneting correction estimate = 1.000000
[Sat Mar 31 01:31:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 31 01:31:58 2012] Assessing source extent using major axis lower bound
[Sat Mar 31 01:31:58 2012] Source does appear to be extended
[Sat Mar 31 01:31:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 01:54:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Mar 31 01:54:15 2012] Initial guess for spatial extent in simple fitting = 5.09"
[Sat Mar 31 01:54:15 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.807
[Sat Mar 31 01:54:15 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.09"
[Sat Mar 31 02:15:35 2012] fullrun_mos2_xmm0500860601_pi300-10000_cl_pass1_src1.ximg exists
[Sat Mar 31 02:15:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500860601_pi300-10000_cl_pass1_src1.csv
[Sat Mar 31 02:15:35 2012] fullrun_mos2_xmm0500860601_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Mar 31 02:15:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500860601_pi300-10000_cl_pass1_src1.csv
[Sat Mar 31 02:15:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500860601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500860601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 31 02:15:35 2012] fullrun_mos2_xmm0500860601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Mar 31 02:15:35 2012] fullrun_mos2_xmm0500860601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Mar 31 02:15:35 2012] Fit fullrun_mos2_xmm0500860601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Mar 31 02:15:41 2012] Spatial fit model total counts = 6406.240000, observed total counts = 6182.000000
[Sat Mar 31 02:15:41 2012] Offset between fit and detection position for source 2 = 0.000043 pixels
[Sat Mar 31 02:15:41 2012] 6389.300000 total counts/ 1745.990000 bgd. counts: snr = 111.123728
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000043 pixels
  Position = (310.8, 278.4) = 5 43 34.49 -68 22 21.9
  Extent = 5.1 (5.0-5.2)", rotation angle = 0
  Source counts = 4643.3 +/- 79.9
  Background counts = 1746.0
  Rate = 0.2 +/- 0.004
[Sat Mar 31 02:15:41 2012] Vigneting correction estimate = 1.000000
[Sat Mar 31 02:15:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 31 02:15:41 2012] Assessing source extent using major axis lower bound
[Sat Mar 31 02:15:41 2012] Source does appear to be extended
[Sat Mar 31 02:15:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 03:36:06 2012] Counts = 4643.310000, rescaling region sizes by 2.000000
[Sat Mar 31 03:36:06 2012] XMMSAS src. selection expression = ellipse(26989.084800, 24172.038800, 611.498418, 611.498418, 0.000000, X, Y)
[Sat Mar 31 03:36:06 2012] Writing source region out to fullrun_mos2_xmm0500860601_pi300-10000_pass1_cl_src2_src.reg
[Sat Mar 31 03:36:06 2012] Extracting stamp from image fullrun_mos2_xmm0500860601_pi300-10000_cl_sm2.00.img.gz, (276, 243) - (346, 314)
[Sat Mar 31 03:36:06 2012] XMMSAS bgd. selection expression = annulus(26989.084800, 24172.038800, 2038.328059, 4076.656117, X, Y)
[Sat Mar 31 03:36:06 2012] Writing fullrun_mos2_xmm0500860601_pi300-10000_pass1_cl_src2.gif
[Sat Mar 31 03:36:10 2012] Mean detx,y = (30.53, 55.00) 
[Sat Mar 31 03:36:12 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 03:36:57 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 03:36:58 2012] Setting source spectrum file to fullrun_mos2_xmm0500860601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Mar 31 03:36:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0500860601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Mar 31 03:51:23 2012] Updating aperture counts using extracted products
[Sat Mar 31 03:51:23 2012] Error reading totcts from fullrun_mos2_xmm0500860601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Mar 31 03:51:23 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 03:51:23 2012] Using photon index=1.80, rate=0.247, arf fullrun_mos2_xmm0500860601_pi300-10000_pass1_cl_src2.arf
[Sat Mar 31 03:51:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 03:51:23 2012] Updating source flux to 2.8e-12
[Sat Mar 31 03:56:47 2012] Reading fit data from xmm0500860601/analysis//spectral/fullrun_mos2_xmm0500860601_pi300-10000_pass1_cl_src2_pl.csv
[Sat Mar 31 03:56:47 2012] Spectral fit parameter nH value = 5.51055e+20
[Sat Mar 31 03:56:47 2012] Spectral fit parameter PhoIndex value = 9.99789
[Sat Mar 31 03:56:47 2012] Failed to get F(0.3-8.0) from xmm0500860601/analysis//spectral/fullrun_mos2_xmm0500860601_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Mar 31 03:56:47 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 03:56:47 2012] Using Nh = 5.5e+20, photon index=10.00, rate=0.247, arf fullrun_mos2_xmm0500860601_pi300-10000_pass1_cl_src2.arf
[Sat Mar 31 03:56:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 03:56:48 2012] Updating source flux to 2.8e-12