[Fri Dec 23 10:19:03 2011] Detection parameters:
  Position = (332.1, 441.2) = 5 42 51.03 -68 11 11.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 23.5 +/- 6.4
  Background counts = 3.6
  Rate = 0.003 +/- 0.0008

[Fri Dec 23 10:19:05 2011] Off-axis axis estimate = 10.63'
[Fri Dec 23 11:13:06 2011] Using EEF radius (= 11.74 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 11:13:06 2011] Initial guess for spatial extent in simple fitting = 11.74"
[Fri Dec 23 11:13:06 2011] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.879
[Fri Dec 23 11:13:06 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 11.74"
[Fri Dec 23 11:58:35 2011] fullrun_mos2_xmm0500860401_pi300-10000_cl_pass0_src13.ximg exists
[Fri Dec 23 11:58:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500860401_pi300-10000_cl_pass0_src13.csv
[Fri Dec 23 11:58:35 2011] fullrun_mos2_xmm0500860401_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Dec 23 11:58:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500860401_pi300-10000_cl_pass0_src13.csv
[Fri Dec 23 11:58:35 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500860401_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500860401_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 11:58:35 2011] fullrun_mos2_xmm0500860401_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Dec 23 11:58:35 2011] fullrun_mos2_xmm0500860401_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Dec 23 11:58:35 2011] Fit fullrun_mos2_xmm0500860401_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Dec 23 11:58:49 2011] Spatial fit model total counts = 49.999800, observed total counts = 50.000000
[Fri Dec 23 11:58:49 2011] Offset between fit and detection position for source 6 = 0.300565 pixels
[Fri Dec 23 11:58:49 2011] 48.888900 total counts/ 32.232900 bgd. counts: snr = 2.933736
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.300565 pixels
  Position = (331.8, 441.1) = 5 42 51.26 -68 11 11.7
  Extent = 4.9 (3.2-7.1)", rotation angle = 0
  Source counts = 16.7 +/- 7.0
  Background counts = 32.2
  Rate = 0.002 +/- 0.0009
[Fri Dec 23 11:58:49 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 11:58:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 11:58:49 2011] Assessing source extent using major axis lower bound
[Fri Dec 23 11:58:49 2011] Source does appear to be extended
[Fri Dec 23 11:58:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 12:07:30 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 23 12:07:30 2011] Initial guess for spatial extent in simple fitting = 4.91"
[Fri Dec 23 12:07:30 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.132
[Fri Dec 23 12:07:30 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 4.91"
[Fri Dec 23 13:05:49 2011] fullrun_mos2_xmm0500860401_pi300-10000_cl_pass1_src13.ximg exists
[Fri Dec 23 13:05:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500860401_pi300-10000_cl_pass1_src13.csv
[Fri Dec 23 13:05:49 2011] fullrun_mos2_xmm0500860401_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Dec 23 13:05:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500860401_pi300-10000_cl_pass1_src13.csv
[Fri Dec 23 13:05:49 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500860401_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500860401_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 13:05:49 2011] fullrun_mos2_xmm0500860401_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Dec 23 13:05:49 2011] fullrun_mos2_xmm0500860401_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Dec 23 13:05:49 2011] Fit fullrun_mos2_xmm0500860401_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Dec 23 13:05:57 2011] Warning, spatial fit 13 centroid is now closest to src. 5
[Fri Dec 23 13:05:57 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 13:05:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 13:05:57 2011] Assessing source extent using major axis lower bound
[Fri Dec 23 13:05:57 2011] Source does appear to be extended
[Fri Dec 23 13:05:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 13:05:57 2011] Deleting source due to low Poisson probability 0.7