[Fri Dec 23 10:19:03 2011] Detection parameters:
  Position = (429.3, 239.0) = 5 41 34.10 -68 25 49.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 28985.1 +/- 198.6
  Background counts = 11.7
  Rate = 4 +/- 0.03

[Fri Dec 23 10:19:05 2011] Off-axis axis estimate = 10.42'
[Fri Dec 23 11:13:06 2011] Using EEF radius (= 11.64 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 11:13:06 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 23 11:13:06 2011] Initial guess for spatial extent in simple fitting = 11.64"
[Fri Dec 23 11:13:06 2011] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.893
[Fri Dec 23 11:13:06 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 11.64"
[Fri Dec 23 11:58:35 2011] fullrun_mos2_xmm0500860401_pi300-10000_cl_pass0_src1.ximg exists
[Fri Dec 23 11:58:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500860401_pi300-10000_cl_pass0_src1.csv
[Fri Dec 23 11:58:35 2011] fullrun_mos2_xmm0500860401_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Dec 23 11:58:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500860401_pi300-10000_cl_pass0_src1.csv
[Fri Dec 23 11:58:35 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500860401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500860401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 11:58:35 2011] fullrun_mos2_xmm0500860401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Dec 23 11:58:35 2011] fullrun_mos2_xmm0500860401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Dec 23 11:58:35 2011] Fit fullrun_mos2_xmm0500860401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Dec 23 11:58:49 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 16.066389 pixels away
[Fri Dec 23 11:58:49 2011] Source 1 is offset by -2.208918 and -3.118730 pixels which is larger than
2 X fitted extent = 1.492262 x 1.492262, not incorporating fit results
[Fri Dec 23 11:58:49 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 11:58:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 11:58:49 2011] Assessing source extent using major
[Fri Dec 23 11:58:49 2011] Source does appear to be extended
[Fri Dec 23 11:58:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 12:07:30 2011] Using EEF radius (= 11.64 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 12:07:30 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 23 12:07:30 2011] Initial guess for spatial extent in simple fitting = 11.64"
[Fri Dec 23 12:07:30 2011] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.893
[Fri Dec 23 12:07:30 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 11.64"
[Fri Dec 23 13:05:48 2011] fullrun_mos2_xmm0500860401_pi300-10000_cl_pass1_src1.ximg exists
[Fri Dec 23 13:05:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500860401_pi300-10000_cl_pass1_src1.csv
[Fri Dec 23 13:05:48 2011] fullrun_mos2_xmm0500860401_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Dec 23 13:05:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500860401_pi300-10000_cl_pass1_src1.csv
[Fri Dec 23 13:05:48 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500860401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500860401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 13:05:49 2011] fullrun_mos2_xmm0500860401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Dec 23 13:05:49 2011] fullrun_mos2_xmm0500860401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Dec 23 13:05:49 2011] Fit fullrun_mos2_xmm0500860401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Dec 23 13:05:57 2011] Spatial fit model total counts = 31926.900000, observed total counts = 31930.000000
[Fri Dec 23 13:05:57 2011] Offset between fit and detection position for source 1 = 0.329756 pixels
[Fri Dec 23 13:05:57 2011] 31971.600000 total counts/ 6680.200000 bgd. counts: snr = 309.441201
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.329756 pixels
  Position = (429.0, 238.9) = 5 41 34.37 -68 25 49.3
  Extent = 9.2 (9.1-9.3)", rotation angle = 0
  Source counts = 25291.4 +/- 178.8
  Background counts = 6680.2
  Rate = 3 +/- 0.02
[Fri Dec 23 13:05:57 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 13:05:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 13:05:57 2011] Assessing source extent using major axis lower bound
[Fri Dec 23 13:05:57 2011] Source does appear to be extended
[Fri Dec 23 13:05:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 13:44:07 2011] Counts = 25291.400000, rescaling region sizes by 3.000000
[Fri Dec 23 13:44:07 2011] XMMSAS src. selection expression = ellipse(37270.300600, 20736.839400, 1657.602048, 1657.602048, 0.000000, X, Y)
[Fri Dec 23 13:44:07 2011] Writing source region out to fullrun_mos2_xmm0500860401_pi300-10000_pass1_cl_src1_src.reg
[Fri Dec 23 13:44:07 2011] Extracting stamp from image fullrun_mos2_xmm0500860401_pi300-10000_cl_sm2.00.img.gz, (334, 144) - (524, 334)
[Fri Dec 23 13:44:08 2011] XMMSAS bgd. selection expression = annulus(37270.300600, 20736.839400, 8288.010238, 16576.020477, X, Y) && !ellipse(24049.422362, 24902.260400, 413.376812, 413.376812, 0.000000, X, Y) && !ellipse(36710.824005, 18764.077805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38041.328217, 20044.715256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35110.338000, 18180.354000, 1839.880053, 1839.880053, -0.000000, X, Y)
[Fri Dec 23 13:44:08 2011] Writing fullrun_mos2_xmm0500860401_pi300-10000_pass1_cl_src1.gif
[Fri Dec 23 13:44:14 2011] Mean detx,y = (13636.72, -2415.72) 
[Fri Dec 23 13:44:19 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 23 13:53:41 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 23 13:53:41 2011] Setting source spectrum file to fullrun_mos2_xmm0500860401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Dec 23 13:53:41 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0500860401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Dec 23 14:14:06 2011] Updating aperture counts using extracted products
[Fri Dec 23 14:14:06 2011] Error reading totcts from fullrun_mos2_xmm0500860401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Dec 23 14:14:07 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 23 14:14:07 2011] Using photon index=1.80, rate=3.32, arf fullrun_mos2_xmm0500860401_pi300-10000_pass1_cl_src1.arf
[Fri Dec 23 14:14:07 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 23 14:14:07 2011] Updating source flux to 7.6e-11
[Fri Dec 23 17:38:33 2011] Flag b found in src. 1 procflags, skipping spectral fitting
[Fri Dec 23 17:57:24 2011] Reading fit data from xmm0500860401/analysis//spectral/fullrun_mos2_xmm0500860401_pi300-10000_pass1_cl_src1_pl.csv
[Fri Dec 23 17:57:24 2011] Spectral fit parameter nH value = 6.9463e+12
[Fri Dec 23 17:57:24 2011] Spectral fit parameter PhoIndex value = 1.10846
[Fri Dec 23 17:57:24 2011] Failed to get F(0.3-8.0) from xmm0500860401/analysis//spectral/fullrun_mos2_xmm0500860401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Dec 23 17:57:24 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 23 17:57:24 2011] Using Nh = 6.9e+12, photon index=1.11, rate=3.32, arf fullrun_mos2_xmm0500860401_pi300-10000_pass1_cl_src1.arf
[Fri Dec 23 17:57:24 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 23 17:57:24 2011] Updating source flux to 1.1e-10