[Fri Dec 23 10:18:20 2011] Detection parameters:
  Position = (349.1, 153.1) = 5 42 37.16 -68 32 4.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.3 +/- 10.0
  Background counts = 3.8
  Rate = 0.008 +/- 0.001

[Fri Dec 23 10:18:20 2011] Off-axis axis estimate = 11.16'
[Fri Dec 23 10:30:35 2011] Using EEF radius (= 12.01 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 10:30:35 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 23 10:30:35 2011] Initial guess for spatial extent in simple fitting = 12.01"
[Fri Dec 23 10:30:35 2011] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.847
[Fri Dec 23 10:30:35 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 12.01"
[Fri Dec 23 11:13:05 2011] fullrun_mos1_xmm0500860401_pi300-10000_cl_pass0_src3.ximg exists
[Fri Dec 23 11:13:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500860401_pi300-10000_cl_pass0_src3.csv
[Fri Dec 23 11:13:05 2011] fullrun_mos1_xmm0500860401_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Dec 23 11:13:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500860401_pi300-10000_cl_pass0_src3.csv
[Fri Dec 23 11:13:05 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500860401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500860401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 11:13:06 2011] fullrun_mos1_xmm0500860401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Dec 23 11:13:06 2011] fullrun_mos1_xmm0500860401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Dec 23 11:13:06 2011] Fit fullrun_mos1_xmm0500860401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Dec 23 11:58:42 2011] Spatial fit model total counts = 95.995700, observed total counts = 96.000000
[Fri Dec 23 11:58:42 2011] Offset between fit and detection position for source 10 = 0.129117 pixels
[Fri Dec 23 11:58:42 2011] 97.207800 total counts/ 54.388500 bgd. counts: snr = 5.806120
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.129117 pixels
  Position = (349.0, 153.2) = 5 42 37.24 -68 32 3.7
  Extent = 5.7 (3.3-7.7)", rotation angle = 0
  Source counts = 42.8 +/- 9.9
  Background counts = 54.4
  Rate = 0.006 +/- 0.001
[Fri Dec 23 11:58:42 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 11:58:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 11:58:42 2011] Assessing source extent using major axis lower bound
[Fri Dec 23 11:58:42 2011] Source does appear to be extended
[Fri Dec 23 11:58:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 11:58:42 2011] Deleting source due to low Poisson probability 0.9