[Sat Nov 26 02:43:10 2011] Detection parameters:
  Position = (266.8, 333.0) = 16 28 12.70 51 47 36.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.9 +/- 17.2
  Background counts = 109.8
  Rate = 0.007 +/- 0.001

[Sat Nov 26 02:43:11 2011] Off-axis axis estimate = 3.40'
[Sat Nov 26 02:55:44 2011] Using EEF radius (= 8.13 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 02:55:44 2011] Initial guess for spatial extent in simple fitting = 8.13"
[Sat Nov 26 02:55:44 2011] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.891
[Sat Nov 26 02:55:44 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 8.13"
[Sat Nov 26 03:06:49 2011] fullrun_mos1_xmm0500850501_pi300-10000_cl_pass0_src6.ximg exists
[Sat Nov 26 03:06:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500850501_pi300-10000_cl_pass0_src6.csv
[Sat Nov 26 03:06:49 2011] fullrun_mos1_xmm0500850501_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat Nov 26 03:06:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500850501_pi300-10000_cl_pass0_src6.csv
[Sat Nov 26 03:06:49 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500850501_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500850501_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 03:06:49 2011] fullrun_mos1_xmm0500850501_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat Nov 26 03:06:49 2011] fullrun_mos1_xmm0500850501_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Nov 26 03:06:49 2011] Fit fullrun_mos1_xmm0500850501_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sat Nov 26 03:21:44 2011] Source 3 is offset by -6.649413 and 6.480089 pixels which is larger than
2 X fitted extent = 0.942650 x 0.942650, not incorporating fit results
[Sat Nov 26 03:21:44 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 03:21:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 03:21:44 2011] Assessing source extent using major
[Sat Nov 26 03:21:44 2011] Source does appear to be extended
[Sat Nov 26 03:21:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 04:06:18 2011] Using EEF radius (= 8.13 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 04:06:18 2011] Initial guess for spatial extent in simple fitting = 8.13"
[Sat Nov 26 04:06:18 2011] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.891
[Sat Nov 26 04:06:18 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 8.13"
[Sat Nov 26 04:12:01 2011] fullrun_mos1_xmm0500850501_pi300-10000_cl_pass1_src4.ximg exists
[Sat Nov 26 04:12:01 2011] fullrun_mos1_xmm0500850501_pi300-10000_cl_pass1_src4_1.ximg exists
[Sat Nov 26 04:12:01 2011] Fit fullrun_mos1_xmm0500850501_pi300-10000_cl_pass1_src4 appears to have run properly
[Sat Nov 26 04:12:01 2011] fullrun_mos1_xmm0500850501_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sat Nov 26 04:12:01 2011] fullrun_mos1_xmm0500850501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sat Nov 26 04:12:01 2011] Fit fullrun_mos1_xmm0500850501_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sat Nov 26 04:22:24 2011] Source 3 is offset by -6.622816 and 6.480089 pixels which is larger than
2 X fitted extent = 0.934267 x 0.934267, not incorporating fit results
[Sat Nov 26 04:22:24 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 04:22:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 04:22:24 2011] Assessing source extent using major
[Sat Nov 26 04:22:24 2011] Source does appear to be extended
[Sat Nov 26 04:22:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 04:47:26 2011] XMMSAS src. selection expression = ellipse(23160.035034, 28923.017731, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Nov 26 04:47:26 2011] Writing source region out to fullrun_mos1_xmm0500850501_pi300-10000_pass1_cl_src3_src.reg
[Sat Nov 26 04:47:26 2011] Extracting stamp from image fullrun_mos1_xmm0500850501_pi300-10000_cl_sm2.00.img.gz, (229, 296) - (304, 371)
[Sat Nov 26 04:47:26 2011] XMMSAS bgd. selection expression = annulus(23160.035034, 28923.017731, 1087.500000, 2175.000000, X, Y) && !ellipse(24742.889220, 27579.862600, 417.301612, 417.301612, 0.000000, X, Y)
[Sat Nov 26 04:47:26 2011] Writing fullrun_mos1_xmm0500850501_pi300-10000_pass1_cl_src3.gif
[Sat Nov 26 04:49:30 2011] Mean detx,y = (2324.27, 395.35) 
[Sat Nov 26 04:49:32 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Nov 26 04:49:46 2011] Binned source spectrum to 10 counts/bin
[Sat Nov 26 04:49:46 2011] Setting source spectrum file to fullrun_mos1_xmm0500850501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Nov 26 04:49:46 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0500850501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Nov 26 04:55:58 2011] Not generating rmf since there are only 75 counts
[Sat Nov 26 04:55:58 2011] rmf not generated due to insufficient counts
[Sat Nov 26 05:02:53 2011] Updating aperture counts using extracted products
[Sat Nov 26 05:02:53 2011] Error reading totcts from fullrun_mos1_xmm0500850501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Nov 26 05:02:53 2011] Calculating source flux in energy range 0.30-8.00
[Sat Nov 26 05:02:53 2011] Using photon index=1.80, rate=0.00658, arf fullrun_mos1_xmm0500850501_pi300-10000_pass1_cl_src3.arf
[Sat Nov 26 05:02:53 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Nov 26 05:02:53 2011] Updating source flux to 6.7e-14
[Sat Nov 26 05:02:54 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting