[Wed Dec 21 07:18:46 2011] Detection parameters:
  Position = (459.2, 356.1) = 13 0 35.69 -69 47 34.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.1 +/- 8.4
  Background counts = 5.9
  Rate = 0.003 +/- 0.0008

[Wed Dec 21 07:18:47 2011] Off-axis axis estimate = 12.38'
[Wed Dec 21 07:48:29 2011] Using EEF radius (= 12.62 ")to estimate initial spatial extent for simple fitting
[Wed Dec 21 07:48:29 2011] Initial guess for spatial extent in simple fitting = 12.62"
[Wed Dec 21 07:48:29 2011] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.059
[Wed Dec 21 07:48:29 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 12.62"
[Wed Dec 21 08:57:38 2011] fullrun_mos2_xmm0500820801_pi300-10000_cl_pass0_src13.ximg exists
[Wed Dec 21 08:57:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500820801_pi300-10000_cl_pass0_src13.csv
[Wed Dec 21 08:57:38 2011] fullrun_mos2_xmm0500820801_pi300-10000_cl_pass0_src13_1.ximg exists
[Wed Dec 21 08:57:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500820801_pi300-10000_cl_pass0_src13.csv
[Wed Dec 21 08:57:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500820801_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500820801_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 08:57:39 2011] fullrun_mos2_xmm0500820801_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Wed Dec 21 08:57:39 2011] fullrun_mos2_xmm0500820801_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Wed Dec 21 08:57:39 2011] Fit fullrun_mos2_xmm0500820801_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Wed Dec 21 08:57:49 2011] Spatial fit model total counts = 129.999000, observed total counts = 130.000000
[Wed Dec 21 08:57:49 2011] Offset between fit and detection position for source 14 = 0.776218 pixels
[Wed Dec 21 08:57:49 2011] 88.085300 total counts/ 70.526500 bgd. counts: snr = 2.090830
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.776218 pixels
  Position = (458.5, 356.5) = 13 0 36.27 -69 47 34.2
  Extent = 5.5 (3.6-9.0)", rotation angle = 0
  Source counts = 17.6 +/- 9.4
  Background counts = 70.5
  Rate = 0.002 +/- 0.0009
[Wed Dec 21 08:57:49 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 08:57:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 08:57:49 2011] Assessing source extent using major axis lower bound
[Wed Dec 21 08:57:49 2011] Source does appear to be extended
[Wed Dec 21 08:57:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 09:15:27 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Dec 21 09:15:27 2011] Initial guess for spatial extent in simple fitting = 5.46"
[Wed Dec 21 09:15:27 2011] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.731
[Wed Dec 21 09:15:27 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 5.46"
[Wed Dec 21 10:44:31 2011] fullrun_mos2_xmm0500820801_pi300-10000_cl_pass1_src13.ximg exists
[Wed Dec 21 10:44:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500820801_pi300-10000_cl_pass1_src13.csv
[Wed Dec 21 10:44:31 2011] fullrun_mos2_xmm0500820801_pi300-10000_cl_pass1_src13_1.ximg exists
[Wed Dec 21 10:44:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500820801_pi300-10000_cl_pass1_src13.csv
[Wed Dec 21 10:44:31 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500820801_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500820801_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 21 10:44:32 2011] fullrun_mos2_xmm0500820801_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Wed Dec 21 10:44:32 2011] fullrun_mos2_xmm0500820801_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Wed Dec 21 10:44:32 2011] Fit fullrun_mos2_xmm0500820801_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Wed Dec 21 10:44:45 2011] Spatial fit model total counts = 114.209000, observed total counts = 115.000000
[Wed Dec 21 10:44:45 2011] Offset between fit and detection position for source 14 = 0.418414 pixels
[Wed Dec 21 10:44:45 2011] 81.388000 total counts/ 57.575000 bgd. counts: snr = 3.138319
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.418414 pixels
  Position = (458.9, 356.3) = 13 0 35.97 -69 47 35.1
  Extent = 6.5 (4.7-7.4)", rotation angle = 0
  Source counts = 23.8 +/- 9.0
  Background counts = 57.6
  Rate = 0.002 +/- 0.0008
[Wed Dec 21 10:44:45 2011] Vigneting correction estimate = 1.000000
[Wed Dec 21 10:44:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 21 10:44:45 2011] Assessing source extent using major axis lower bound
[Wed Dec 21 10:44:45 2011] Source does appear to be extended
[Wed Dec 21 10:44:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 21 10:44:45 2011] Source is confused with source 13
[Wed Dec 21 10:51:46 2011] XMMSAS src. selection expression = ellipse(39871.618400, 30946.079200, 389.248811, 389.248811, 0.000000, X, Y)
[Wed Dec 21 10:51:46 2011] Writing source region out to fullrun_mos2_xmm0500820801_pi300-10000_pass1_cl_src14_src.reg
[Wed Dec 21 10:51:46 2011] Extracting stamp from image fullrun_mos2_xmm0500820801_pi300-10000_cl_sm2.00.img.gz, (436, 334) - (481, 379)
[Wed Dec 21 10:51:46 2011] XMMSAS bgd. selection expression = annulus(39871.618400, 30946.079200, 648.748019, 1297.496037, X, Y) && !ellipse(39070.737600, 30752.728200, 648.847219, 648.847219, 0.000000, X, Y) && !ellipse(40605.854000, 31022.781720, 1020.776029, 1020.776029, 0.000000, X, Y)
[Wed Dec 21 10:51:46 2011] Writing fullrun_mos2_xmm0500820801_pi300-10000_pass1_cl_src14.gif
[Wed Dec 21 10:59:06 2011] Mean detx,y = (-13612.80, -3009.29) 
[Wed Dec 21 10:59:09 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 21 10:59:22 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 21 10:59:22 2011] Setting source spectrum file to fullrun_mos2_xmm0500820801_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed Dec 21 10:59:22 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0500820801_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Wed Dec 21 11:04:10 2011] Not generating rmf since there are only 23 counts
[Wed Dec 21 11:04:10 2011] rmf not generated due to insufficient counts
[Wed Dec 21 11:05:41 2011] Updating aperture counts using extracted products
[Wed Dec 21 11:05:41 2011] Error reading totcts from fullrun_mos2_xmm0500820801_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed Dec 21 11:05:42 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 21 11:05:42 2011] Using photon index=1.80, rate=0.00224, arf fullrun_mos2_xmm0500820801_pi300-10000_pass1_cl_src14.arf
[Wed Dec 21 11:05:42 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 21 11:05:42 2011] Updating source flux to 5.6e-14
[Wed Dec 21 11:05:45 2011] Flag c found in src. 14 procflags, skipping spectral fitting
[Wed Dec 21 11:05:45 2011] Source 14 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Dec 21 11:05:46 2011] xmm0500820801/analysis//spectral/fullrun_mos2_xmm0500820801_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete