[Fri Feb 17 16:17:12 2012] Detection parameters:
  Position = (295.3, 202.3) = 13 2 54.64 -69 58 46.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 416.3 +/- 24.6
  Background counts = 4.2
  Rate = 0.07 +/- 0.004

[Fri Feb 17 16:17:13 2012] Off-axis axis estimate = 6.98'
[Fri Feb 17 16:30:58 2012] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 16:30:58 2012] Initial guess for spatial extent in simple fitting = 9.92"
[Fri Feb 17 16:30:58 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.971
[Fri Feb 17 16:30:58 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.92"
[Fri Feb 17 17:14:34 2012] fullrun_mos2_xmm0500820701_pi300-10000_cl_pass0_src1.ximg exists
[Fri Feb 17 17:14:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500820701_pi300-10000_cl_pass0_src1.csv
[Fri Feb 17 17:14:34 2012] fullrun_mos2_xmm0500820701_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Feb 17 17:14:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500820701_pi300-10000_cl_pass0_src1.csv
[Fri Feb 17 17:14:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500820701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500820701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 17:14:34 2012] fullrun_mos2_xmm0500820701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Feb 17 17:14:34 2012] fullrun_mos2_xmm0500820701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Feb 17 17:14:34 2012] Fit fullrun_mos2_xmm0500820701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Feb 17 17:14:40 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.616401 pixels away
[Fri Feb 17 17:14:40 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 17:14:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 17:14:40 2012] Assessing source extent using major
[Fri Feb 17 17:14:40 2012] Source does appear to be extended
[Fri Feb 17 17:14:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 17:25:48 2012] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 17:25:48 2012] Initial guess for spatial extent in simple fitting = 9.92"
[Fri Feb 17 17:25:48 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.971
[Fri Feb 17 17:25:48 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 9.92"
[Fri Feb 17 18:00:52 2012] fullrun_mos2_xmm0500820701_pi300-10000_cl_pass1_src1.ximg exists
[Fri Feb 17 18:00:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500820701_pi300-10000_cl_pass1_src1.csv
[Fri Feb 17 18:00:52 2012] fullrun_mos2_xmm0500820701_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Feb 17 18:00:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500820701_pi300-10000_cl_pass1_src1.csv
[Fri Feb 17 18:00:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500820701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500820701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 18:00:52 2012] fullrun_mos2_xmm0500820701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Feb 17 18:00:52 2012] fullrun_mos2_xmm0500820701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Feb 17 18:00:52 2012] Fit fullrun_mos2_xmm0500820701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Feb 17 18:00:58 2012] Spatial fit model total counts = 435.000000, observed total counts = 435.000000
[Fri Feb 17 18:00:58 2012] Offset between fit and detection position for source 3 = 0.142702 pixels
[Fri Feb 17 18:00:58 2012] 433.524000 total counts/ 124.805000 bgd. counts: snr = 27.634230
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.142702 pixels
  Position = (295.3, 202.4) = 13 2 54.69 -69 58 46.2
  Extent = 6.0 (5.3-6.6)", rotation angle = 0
  Source counts = 308.7 +/- 20.8
  Background counts = 124.8
  Rate = 0.03 +/- 0.002
[Fri Feb 17 18:00:58 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 18:00:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 18:00:58 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 18:00:58 2012] Source does appear to be extended
[Fri Feb 17 18:00:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 18:04:44 2012] XMMSAS src. selection expression = ellipse(25639.492600, 17558.636400, 360.923410, 360.923410, 0.000000, X, Y)
[Fri Feb 17 18:04:44 2012] Writing source region out to fullrun_mos2_xmm0500820701_pi300-10000_pass1_cl_src3_src.reg
[Fri Feb 17 18:04:44 2012] Extracting stamp from image fullrun_mos2_xmm0500820701_pi300-10000_cl_sm2.00.img.gz, (275, 182) - (316, 223)
[Fri Feb 17 18:04:44 2012] XMMSAS bgd. selection expression = annulus(25639.492600, 17558.636400, 601.539017, 1203.078035, X, Y)
[Fri Feb 17 18:04:44 2012] Writing fullrun_mos2_xmm0500820701_pi300-10000_pass1_cl_src3.gif
[Fri Feb 17 18:04:46 2012] Mean detx,y = (4543.89, -9289.13) 
[Fri Feb 17 18:04:47 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 17 18:04:54 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 17 18:04:54 2012] Setting source spectrum file to fullrun_mos2_xmm0500820701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Feb 17 18:04:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0500820701_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Feb 17 18:14:14 2012] Updating aperture counts using extracted products
[Fri Feb 17 18:14:14 2012] Error reading totcts from fullrun_mos2_xmm0500820701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Feb 17 18:14:15 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 18:14:15 2012] Using photon index=1.80, rate=0.0291, arf fullrun_mos2_xmm0500820701_pi300-10000_pass1_cl_src3.arf
[Fri Feb 17 18:14:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 18:14:15 2012] Updating source flux to 5.5e-13
[Fri Feb 17 18:14:21 2012] Reading fit data from xmm0500820701/analysis//spectral/fullrun_mos2_xmm0500820701_pi300-10000_pass1_cl_src3_pl.csv
[Fri Feb 17 18:14:21 2012] Spectral fit parameter nH value = 3.64714e+21
[Fri Feb 17 18:14:21 2012] Spectral fit parameter PhoIndex value = 1.81939
[Fri Feb 17 18:14:21 2012] Failed to get F(0.3-8.0) from xmm0500820701/analysis//spectral/fullrun_mos2_xmm0500820701_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Fri Feb 17 18:14:21 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 18:14:21 2012] Using Nh = 3.6e+21, photon index=1.82, rate=0.0291, arf fullrun_mos2_xmm0500820701_pi300-10000_pass1_cl_src3.arf
[Fri Feb 17 18:14:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 18:14:21 2012] Updating source flux to 7.1e-13