[Fri Feb 17 16:17:13 2012] Detection parameters:
  Position = (304.3, 170.8) = 13 2 47.00 -70 1 3.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33.5 +/- 7.5
  Background counts = 3.6
  Rate = 0.003 +/- 0.0007

[Fri Feb 17 16:17:13 2012] Off-axis axis estimate = 9.27'
[Fri Feb 17 16:30:58 2012] Using EEF radius (= 11.06 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 16:30:58 2012] Initial guess for spatial extent in simple fitting = 11.06"
[Fri Feb 17 16:30:58 2012] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.972
[Fri Feb 17 16:30:58 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 11.06"
[Fri Feb 17 17:14:34 2012] fullrun_mos2_xmm0500820701_pi300-10000_cl_pass0_src17.ximg exists
[Fri Feb 17 17:14:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500820701_pi300-10000_cl_pass0_src17.csv
[Fri Feb 17 17:14:34 2012] fullrun_mos2_xmm0500820701_pi300-10000_cl_pass0_src17_1.ximg exists
[Fri Feb 17 17:14:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500820701_pi300-10000_cl_pass0_src17.csv
[Fri Feb 17 17:14:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500820701_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500820701_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 17:14:34 2012] fullrun_mos2_xmm0500820701_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Fri Feb 17 17:14:34 2012] fullrun_mos2_xmm0500820701_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Fri Feb 17 17:14:34 2012] Fit fullrun_mos2_xmm0500820701_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Fri Feb 17 17:14:40 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 15.076581 pixels away
[Fri Feb 17 17:14:40 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 17:14:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 17:14:40 2012] Assessing source extent using major
[Fri Feb 17 17:14:40 2012] Source does appear to be extended
[Fri Feb 17 17:14:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 17:25:48 2012] Using EEF radius (= 11.06 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 17:25:48 2012] Initial guess for spatial extent in simple fitting = 11.06"
[Fri Feb 17 17:25:48 2012] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.972
[Fri Feb 17 17:25:48 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 11.06"
[Fri Feb 17 18:00:52 2012] fullrun_mos2_xmm0500820701_pi300-10000_cl_pass1_src13.ximg exists
[Fri Feb 17 18:00:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500820701_pi300-10000_cl_pass1_src13.csv
[Fri Feb 17 18:00:52 2012] fullrun_mos2_xmm0500820701_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Feb 17 18:00:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500820701_pi300-10000_cl_pass1_src13.csv
[Fri Feb 17 18:00:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500820701_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500820701_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 18:00:52 2012] fullrun_mos2_xmm0500820701_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Feb 17 18:00:52 2012] fullrun_mos2_xmm0500820701_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Feb 17 18:00:52 2012] Fit fullrun_mos2_xmm0500820701_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Feb 17 18:00:58 2012] Spatial fit model total counts = 68.915500, observed total counts = 69.000000
[Fri Feb 17 18:00:58 2012] Offset between fit and detection position for source 19 = 0.089345 pixels
[Fri Feb 17 18:00:58 2012] 64.993300 total counts/ 50.288800 bgd. counts: snr = 2.073551
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.089345 pixels
  Position = (304.4, 170.8) = 13 2 46.96 -70 1 3.5
  Extent = 2.8" x 2.8", rotation angle = 0
  Source counts = 14.7 +/- 8.1
  Background counts = 50.3
  Rate = 0.001 +/- 0.0008
[Fri Feb 17 18:00:58 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 18:00:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 18:00:58 2012] Assessing source extent using major
[Fri Feb 17 18:00:58 2012] Source does appear to be extended
[Fri Feb 17 18:00:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 18:04:45 2012] XMMSAS src. selection expression = ellipse(26432.661800, 14813.222800, 165.931205, 165.931205, 0.000000, X, Y)
[Fri Feb 17 18:04:45 2012] Writing source region out to fullrun_mos2_xmm0500820701_pi300-10000_pass1_cl_src19_src.reg
[Fri Feb 17 18:04:45 2012] Extracting stamp from image fullrun_mos2_xmm0500820701_pi300-10000_cl_sm2.00.img.gz, (295, 161) - (314, 180)
[Fri Feb 17 18:04:45 2012] XMMSAS bgd. selection expression = annulus(26432.661800, 14813.222800, 276.552008, 553.104016, X, Y)
[Fri Feb 17 18:04:45 2012] Writing fullrun_mos2_xmm0500820701_pi300-10000_pass1_cl_src19.gif
[Fri Feb 17 18:07:26 2012] Mean detx,y = (4828.50, -12136.19) 
[Fri Feb 17 18:07:27 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 17 18:07:34 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 17 18:07:34 2012] Setting source spectrum file to fullrun_mos2_xmm0500820701_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Fri Feb 17 18:07:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0500820701_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Fri Feb 17 18:13:40 2012] Not generating rmf since there are only 14 counts
[Fri Feb 17 18:13:40 2012] rmf not generated due to insufficient counts
[Fri Feb 17 18:14:15 2012] Updating aperture counts using extracted products
[Fri Feb 17 18:14:15 2012] Error reading totcts from fullrun_mos2_xmm0500820701_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Fri Feb 17 18:14:15 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 18:14:15 2012] Using photon index=1.80, rate=0.00139, arf fullrun_mos2_xmm0500820701_pi300-10000_pass1_cl_src19.arf
[Fri Feb 17 18:14:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 18:14:15 2012] Updating source flux to 5.8e-14
[Fri Feb 17 18:14:16 2012] Source 19 has fewer than 100.000000 counts, skipping spectral fitting