[Fri Feb 17 16:17:13 2012] Detection parameters:
  Position = (262.3, 325.2) = 13 3 22.35 -69 49 52.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33.6 +/- 7.3
  Background counts = 3.7
  Rate = 0.005 +/- 0.001

[Fri Feb 17 16:17:13 2012] Off-axis axis estimate = 3.26'
[Fri Feb 17 16:30:58 2012] Using EEF radius (= 8.06 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 16:30:58 2012] Initial guess for spatial extent in simple fitting = 8.06"
[Fri Feb 17 16:30:58 2012] source mask rpix=1.9, npix_max = 22, mask sum = 12, frac = 0.542
[Fri Feb 17 16:30:58 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 8.06"
[Fri Feb 17 17:14:34 2012] fullrun_mos2_xmm0500820701_pi300-10000_cl_pass0_src9.ximg exists
[Fri Feb 17 17:14:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500820701_pi300-10000_cl_pass0_src9.csv
[Fri Feb 17 17:14:34 2012] fullrun_mos2_xmm0500820701_pi300-10000_cl_pass0_src9_1.ximg exists
[Fri Feb 17 17:14:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500820701_pi300-10000_cl_pass0_src9.csv
[Fri Feb 17 17:14:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500820701_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500820701_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 17:14:34 2012] fullrun_mos2_xmm0500820701_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Fri Feb 17 17:14:34 2012] fullrun_mos2_xmm0500820701_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Fri Feb 17 17:14:34 2012] Fit fullrun_mos2_xmm0500820701_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Fri Feb 17 17:14:40 2012] Spatial fit model total counts = 41.815400, observed total counts = 45.000000
[Fri Feb 17 17:14:40 2012] Offset between fit and detection position for source 18 = 0.915394 pixels
[Fri Feb 17 17:14:40 2012] 44.778600 total counts/ 17.607900 bgd. counts: snr = 6.475108
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.915394 pixels
  Position = (263.1, 324.7) = 13 3 21.73 -69 49 54.2
  Extent = 5.5 (4.4-7.4)", rotation angle = 0
  Source counts = 27.2 +/- 6.7
  Background counts = 17.6
  Rate = 0.003 +/- 0.0006
[Fri Feb 17 17:14:40 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 17:14:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 17:14:40 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 17:14:40 2012] Source does appear to be extended
[Fri Feb 17 17:14:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 17:25:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 17:25:48 2012] Initial guess for spatial extent in simple fitting = 5.48"
[Fri Feb 17 17:25:48 2012] source mask rpix=1.3, npix_max = 12, mask sum = 6, frac = 0.484
[Fri Feb 17 17:25:48 2012] Skipping simple spatial due to low active detector fraction
[Fri Feb 17 18:00:58 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 18:00:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 18:00:58 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 18:00:58 2012] Source does appear to be extended
[Fri Feb 17 18:00:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 18:04:44 2012] XMMSAS src. selection expression = ellipse(22840.693400, 28196.598200, 328.848722, 328.848722, 0.000000, X, Y)
[Fri Feb 17 18:04:44 2012] Writing source region out to fullrun_mos2_xmm0500820701_pi300-10000_pass1_cl_src18_src.reg
[Fri Feb 17 18:04:44 2012] Extracting stamp from image fullrun_mos2_xmm0500820701_pi300-10000_cl_sm2.00.img.gz, (244, 306) - (282, 344)
[Fri Feb 17 18:04:45 2012] XMMSAS bgd. selection expression = annulus(22840.693400, 28196.598200, 548.081203, 1096.162407, X, Y)
[Fri Feb 17 18:04:45 2012] Writing fullrun_mos2_xmm0500820701_pi300-10000_pass1_cl_src18.gif
[Fri Feb 17 18:05:40 2012] Mean detx,y = (3197.10, 1628.63) 
[Fri Feb 17 18:05:41 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 17 18:05:52 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 17 18:05:53 2012] Setting source spectrum file to fullrun_mos2_xmm0500820701_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Fri Feb 17 18:05:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0500820701_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Fri Feb 17 18:12:20 2012] Not generating rmf since there are only 27 counts
[Fri Feb 17 18:12:20 2012] rmf not generated due to insufficient counts
[Fri Feb 17 18:14:14 2012] Updating aperture counts using extracted products
[Fri Feb 17 18:14:14 2012] Error reading totcts from fullrun_mos2_xmm0500820701_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Fri Feb 17 18:14:15 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 18:14:15 2012] Using photon index=1.80, rate=0.00256, arf fullrun_mos2_xmm0500820701_pi300-10000_pass1_cl_src18.arf
[Fri Feb 17 18:14:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 18:14:15 2012] Updating source flux to 3.5e-14
[Fri Feb 17 18:14:16 2012] Source 18 has fewer than 100.000000 counts, skipping spectral fitting