[Sat May  5 18:39:28 2012] Detection parameters:
  Position = (287.2, 257.3) = 11 12 56.08 13 24 53.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1316.2 +/- 48.5
  Background counts = 181.5
  Rate = 0.03 +/- 0.001

[Sat May  5 18:39:38 2012] Off-axis axis estimate = 3.09'
[Sat May  5 18:46:10 2012] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Sat May  5 18:46:10 2012] Initial guess for spatial extent in simple fitting = 7.97"
[Sat May  5 18:46:10 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.148
[Sat May  5 18:46:10 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.97"
[Sun May  6 01:52:56 2012] fullrun_pn_xmm0500760101_pi300-10000_cl_pass0_src5.ximg exists
[Sun May  6 01:52:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500760101_pi300-10000_cl_pass0_src5.csv
[Sun May  6 01:52:56 2012] fullrun_pn_xmm0500760101_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun May  6 01:52:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500760101_pi300-10000_cl_pass0_src5.csv
[Sun May  6 01:52:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500760101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500760101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 01:52:58 2012] fullrun_pn_xmm0500760101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun May  6 01:52:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500760101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun May  6 01:52:58 2012] fullrun_pn_xmm0500760101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun May  6 01:52:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500760101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun May  6 01:52:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500760101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500760101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 09:48:33 2012] Spatial fit model total counts = 6451.170000, observed total counts = 5314.000000
[Sun May  6 09:48:33 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  6 09:48:33 2012] Vigneting correction estimate = 1.000000
[Sun May  6 09:48:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 09:48:33 2012] Assessing source extent using major
[Sun May  6 09:48:33 2012] Source does appear to be extended
[Sun May  6 09:48:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 09:49:32 2012] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Sun May  6 09:49:32 2012] Initial guess for spatial extent in simple fitting = 7.97"
[Sun May  6 09:49:32 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.148
[Sun May  6 09:49:32 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 7.97"
[Sun May  6 12:43:58 2012] fullrun_pn_xmm0500760101_pi300-10000_cl_pass1_src5.ximg exists
[Sun May  6 12:43:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500760101_pi300-10000_cl_pass1_src5.csv
[Sun May  6 12:43:58 2012] fullrun_pn_xmm0500760101_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun May  6 12:43:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500760101_pi300-10000_cl_pass1_src5.csv
[Sun May  6 12:43:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500760101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500760101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 12:43:59 2012] fullrun_pn_xmm0500760101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun May  6 12:43:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500760101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun May  6 12:43:59 2012] fullrun_pn_xmm0500760101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun May  6 12:43:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500760101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun May  6 12:43:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500760101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500760101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 20:28:24 2012] Spatial fit model total counts = 8218.650000, observed total counts = 5314.000000
[Sun May  6 20:28:24 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  6 20:28:24 2012] Vigneting correction estimate = 1.000000
[Sun May  6 20:28:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 20:28:24 2012] Assessing source extent using major
[Sun May  6 20:28:24 2012] Source does appear to be extended
[Sun May  6 20:28:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 20:29:19 2012] Counts = 1316.155396, rescaling region sizes by 2.000000
[Sun May  6 20:29:19 2012] XMMSAS src. selection expression = ellipse(24935.936340, 22339.984100, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun May  6 20:29:19 2012] Writing source region out to fullrun_pn_xmm0500760101_pi300-10000_pass1_cl_src5_src.reg
[Sun May  6 20:29:19 2012] Extracting stamp from image fullrun_pn_xmm0500760101_pi300-10000_cl_sm2.00.img.gz, (212, 182) - (362, 332)
[Sun May  6 20:29:19 2012] XMMSAS bgd. selection expression = annulus(24935.936340, 22339.984100, 4350.000000, 8700.000000, X, Y) && !ellipse(25388.911080, 23768.023200, 1161.528033, 1161.528033, 0.000000, X, Y) && !ellipse(25776.839874, 22655.170593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19321.940613, 13336.450531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25074.189026, 30922.307892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26391.341095, 26399.438934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25469.066000, 24646.974000, 2108.408061, 2108.408061, 0.000000, X, Y) && !ellipse(26934.371582, 28133.340332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17469.630219, 27943.805756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25253.242000, 27729.234000, 1107.016032, 1107.016032, 0.000000, X, Y) && !ellipse(25807.253235, 27087.131348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27163.678497, 26853.897644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28222.113892, 26652.906616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23959.538000, 26914.364000, 1130.048033, 1130.048033, 0.000000, X, Y) && !ellipse(24502.818756, 26482.289124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20036.208542, 26130.067627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26787.415710, 25771.824524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27626.736847, 25378.338562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23648.049800, 25272.955400, 554.692816, 554.692816, 0.000000, X, Y) && !ellipse(27955.214417, 24595.004028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30372.966800, 23268.451600, 419.145612, 419.145612, 0.000000, X, Y) && !ellipse(23911.450806, 23168.786011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27157.125885, 23223.973450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16180.321442, 22152.689041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27536.459000, 21497.906000, 956.232028, 956.232028, 0.000000, X, Y) && !ellipse(34052.627258, 20950.612579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32407.394940, 19635.033200, 724.283221, 724.283221, 0.000000, X, Y) && !ellipse(18644.742203, 17371.958328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25696.029400, 17104.020600, 377.162411, 377.162411, 0.000000, X, Y) && !ellipse(26781.812000, 17000.003400, 352.461610, 352.461610, 0.000000, X, Y) && !ellipse(23943.796400, 14995.842000, 813.384023, 813.384023, 0.000000, X, Y)
[Sun May  6 20:29:19 2012] Writing fullrun_pn_xmm0500760101_pi300-10000_pass1_cl_src5.gif
[Sun May  6 20:53:05 2012] Mean detx,y = (895.07, -1210.87) 
[Sun May  6 20:53:22 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May  6 20:58:17 2012] Binned source spectrum to 10 counts/bin
[Sun May  6 20:58:18 2012] Setting source spectrum file to fullrun_pn_xmm0500760101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun May  6 20:58:18 2012] Setting bgd. spectrum file to fullrun_pn_xmm0500760101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Mon May  7 03:47:47 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May  7 03:47:47 2012] rmf not generated due to insufficient counts
[Tue May  8 18:35:02 2012] Updating aperture counts using extracted products
[Tue May  8 18:35:02 2012] Error reading totcts from fullrun_pn_xmm0500760101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue May  8 18:35:09 2012] Calculating source flux in energy range 0.30-8.00
[Tue May  8 18:35:09 2012] Using photon index=1.80, rate=0.0346, arf fullrun_pn_xmm0500760101_pi300-10000_pass1_cl_src5.arf
[Tue May  8 18:35:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May  8 18:35:09 2012] Updating source flux to 8.8e-14
[Tue May  8 18:44:16 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting