[Sat May 5 18:39:27 2012] Detection parameters: Position = (292.9, 274.0) = 11 12 54.36 13 26 5.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 6830.9 +/- 103.4 Background counts = 215.3 Rate = 0.2 +/- 0.002 [Sat May 5 18:39:38 2012] Off-axis axis estimate = 1.81' [Sat May 5 18:46:10 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting [Sat May 5 18:46:10 2012] Initial guess for spatial extent in simple fitting = 7.34" [Sat May 5 18:46:10 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.837 [Sat May 5 18:46:10 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.34" [Sun May 6 01:52:56 2012] fullrun_pn_xmm0500760101_pi300-10000_cl_pass0_src1.ximg exists [Sun May 6 01:52:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500760101_pi300-10000_cl_pass0_src1.csv [Sun May 6 01:52:56 2012] fullrun_pn_xmm0500760101_pi300-10000_cl_pass0_src1_1.ximg exists [Sun May 6 01:52:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500760101_pi300-10000_cl_pass0_src1.csv [Sun May 6 01:52:56 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0500760101_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0500760101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 6 01:52:57 2012] fullrun_pn_xmm0500760101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Sun May 6 01:52:57 2012] fullrun_pn_xmm0500760101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Sun May 6 01:52:57 2012] Fit fullrun_pn_xmm0500760101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly [Sun May 6 09:48:33 2012] Spatial fit model total counts = 18887.400000, observed total counts = 18290.000000 [Sun May 6 09:48:33 2012] Offset between fit and detection position for source 1 = 0.314370 pixels [Sun May 6 09:48:33 2012] 18662.020000 total counts/ 12985.200000 bgd. counts: snr = 49.817371 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.314370 pixels Position = (292.6, 274.1) = 11 12 54.46 13 26 5.9 Extent = 11.3 (10.8-12.0)", rotation angle = 0 Source counts = 5676.8 +/- 136.6 Background counts = 12985.2 Rate = 0.1 +/- 0.003 [Sun May 6 09:48:33 2012] Vigneting correction estimate = 1.000000 [Sun May 6 09:48:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 6 09:48:33 2012] Assessing source extent using major axis lower bound [Sun May 6 09:48:33 2012] Source does appear to be extended [Sun May 6 09:48:33 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 6 09:49:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Sun May 6 09:49:32 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun May 6 09:49:32 2012] Initial guess for spatial extent in simple fitting = 11.30" [Sun May 6 09:49:32 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.939 [Sun May 6 09:49:32 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.30" [Sun May 6 12:43:58 2012] fullrun_pn_xmm0500760101_pi300-10000_cl_pass1_src1.ximg exists [Sun May 6 12:43:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500760101_pi300-10000_cl_pass1_src1.csv [Sun May 6 12:43:58 2012] fullrun_pn_xmm0500760101_pi300-10000_cl_pass1_src1_1.ximg exists [Sun May 6 12:43:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500760101_pi300-10000_cl_pass1_src1.csv [Sun May 6 12:43:58 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0500760101_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0500760101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 6 12:43:59 2012] fullrun_pn_xmm0500760101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Sun May 6 12:43:59 2012] fullrun_pn_xmm0500760101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Sun May 6 12:43:59 2012] Fit fullrun_pn_xmm0500760101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly [Sun May 6 20:28:24 2012] Spatial fit model total counts = 26297.200000, observed total counts = 24432.000000 [Sun May 6 20:28:24 2012] Offset between fit and detection position for source 1 = 0.391584 pixels [Sun May 6 20:28:24 2012] 26047.970000 total counts/ 17390.200000 bgd. counts: snr = 65.652876 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.391584 pixels Position = (292.4, 273.8) = 11 12 54.52 13 26 4.5 Extent = 14.5 (13.9-15.1)", rotation angle = 0 Source counts = 8657.8 +/- 161.4 Background counts = 17390.2 Rate = 0.2 +/- 0.003 [Sun May 6 20:28:24 2012] Vigneting correction estimate = 1.000000 [Sun May 6 20:28:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 6 20:28:24 2012] Assessing source extent using major axis lower bound [Sun May 6 20:28:24 2012] Source does appear to be extended [Sun May 6 20:28:24 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 6 20:28:24 2012] Source is confused with source 11 [Sun May 6 20:29:18 2012] Counts = 8657.770000, rescaling region sizes by 2.000000 [Sun May 6 20:29:18 2012] XMMSAS src. selection expression = ellipse(25388.911080, 23768.023200, 1742.292050, 1742.292050, 0.000000, X, Y) [Sun May 6 20:29:18 2012] Writing source region out to fullrun_pn_xmm0500760101_pi300-10000_pass1_cl_src1_src.reg [Sun May 6 20:29:18 2012] Extracting stamp from image fullrun_pn_xmm0500760101_pi300-10000_cl_sm2.00.img.gz, (192, 174) - (393, 374) [Sun May 6 20:29:19 2012] XMMSAS bgd. selection expression = annulus(25388.911080, 23768.023200, 5807.640167, 11615.280334, X, Y) && !ellipse(36170.064000, 28518.739400, 454.397613, 454.397613, 0.000000, X, Y) && !ellipse(25776.839874, 22655.170593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19321.940613, 13336.450531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24935.936340, 22339.984100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36519.441528, 15522.875122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25074.189026, 30922.307892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26391.341095, 26399.438934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25469.066000, 24646.974000, 2108.408061, 2108.408061, 0.000000, X, Y) && !ellipse(36699.318800, 33443.543800, 443.409613, 443.409613, 0.000000, X, Y) && !ellipse(37310.626000, 35708.280000, 366.132011, 366.132011, 0.000000, X, Y) && !ellipse(23871.662537, 35635.765472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31944.271149, 34678.409698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32885.640991, 34120.070312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15313.864578, 34139.643188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25610.884880, 32229.064800, 437.588954, 437.588954, 0.000000, X, Y) && !ellipse(36549.033200, 29564.912200, 547.212816, 547.212816, 0.000000, X, Y) && !ellipse(26934.371582, 28133.340332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17469.630219, 27943.805756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25253.242000, 27729.234000, 1107.016032, 1107.016032, 0.000000, X, Y) && !ellipse(13152.361420, 27372.998352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25807.253235, 27087.131348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27163.678497, 26853.897644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28222.113892, 26652.906616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23959.538000, 26914.364000, 1130.048033, 1130.048033, 0.000000, X, Y) && !ellipse(24502.818756, 26482.289124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37529.555389, 26461.484314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20036.208542, 26130.067627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26787.415710, 25771.824524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24120.460800, 12578.508000, 526.779215, 526.779215, 0.000000, X, Y) && !ellipse(27626.736847, 25378.338562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23648.049800, 25272.955400, 554.692816, 554.692816, 0.000000, X, Y) && !ellipse(27955.214417, 24595.004028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30372.966800, 23268.451600, 419.145612, 419.145612, 0.000000, X, Y) && !ellipse(23911.450806, 23168.786011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27157.125885, 23223.973450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16180.321442, 22152.689041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27536.459000, 21497.906000, 956.232028, 956.232028, 0.000000, X, Y) && !ellipse(34052.627258, 20950.612579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15227.438065, 20306.767975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32407.394940, 19635.033200, 724.283221, 724.283221, 0.000000, X, Y) && !ellipse(18644.742203, 17371.958328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14827.657028, 17300.382721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25696.029400, 17104.020600, 377.162411, 377.162411, 0.000000, X, Y) && !ellipse(26781.812000, 17000.003400, 352.461610, 352.461610, 0.000000, X, Y) && !ellipse(23943.796400, 14995.842000, 813.384023, 813.384023, 0.000000, X, Y) [Sun May 6 20:29:19 2012] Writing fullrun_pn_xmm0500760101_pi300-10000_pass1_cl_src1.gif [Sun May 6 20:30:51 2012] Mean detx,y = (186.33, -290.89) [Sun May 6 20:31:12 2012] Setting backscal keywords in source and bgd. spectrum [Sun May 6 20:42:13 2012] Binned source spectrum to 10 counts/bin [Sun May 6 20:42:14 2012] Setting source spectrum file to fullrun_pn_xmm0500760101_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Sun May 6 20:42:14 2012] Setting bgd. spectrum file to fullrun_pn_xmm0500760101_pi300-10000_pass1_cl_src1_bgd.pi.gz [Tue May 8 18:35:01 2012] Updating aperture counts using extracted products [Tue May 8 18:35:01 2012] Error reading totcts from fullrun_pn_xmm0500760101_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Tue May 8 18:35:08 2012] Calculating source flux in energy range 0.30-8.00 [Tue May 8 18:35:08 2012] Using photon index=1.80, rate=0.173, arf fullrun_pn_xmm0500760101_pi300-10000_pass1_cl_src1.arf [Tue May 8 18:35:08 2012] Assuming count rate is from the 0.30-10.00 bandpass [Tue May 8 18:35:08 2012] Updating source flux to 4e-13 [Tue May 8 18:44:16 2012] Flag c found in src. 1 procflags, skipping spectral fitting [Tue May 8 18:49:00 2012] Reading fit data from xmm0500760101/analysis//spectral/fullrun_pn_xmm0500760101_pi300-10000_pass1_cl_src1_pl.csv [Tue May 8 18:49:00 2012] Spectral fit parameter nH value = 9.34028e+20 [Tue May 8 18:49:00 2012] Spectral fit parameter PhoIndex value = 2.10368 [Tue May 8 18:49:00 2012] Failed to get F(0.3-8.0) from xmm0500760101/analysis//spectral/fullrun_pn_xmm0500760101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected [Tue May 8 18:49:00 2012] Calculating source flux in energy range 0.30-8.00 [Tue May 8 18:49:00 2012] Using Nh = 9.3e+20, photon index=2.10, rate=0.173, arf fullrun_pn_xmm0500760101_pi300-10000_pass1_cl_src1.arf [Tue May 8 18:49:00 2012] Assuming count rate is from the 0.30-10.00 bandpass [Tue May 8 18:49:01 2012] Updating source flux to 4e-13