[Sat May  5 18:39:58 2012] Detection parameters:
  Position = (279.4, 281.9) = 11 12 58.40 13 26 42.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 164.9 +/- 19.4
  Background counts = 71.0
  Rate = 0.004 +/- 0.0004

[Sat May  5 18:39:58 2012] Off-axis axis estimate = 1.83'
[Sun May  6 05:45:11 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Sun May  6 05:45:11 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Sun May  6 05:45:11 2012] source mask rpix=1.7, npix_max = 19, mask sum = 19, frac = 0.992
[Sun May  6 05:45:11 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 7.34"
[Sun May  6 09:48:07 2012] fullrun_mos2_xmm0500760101_pi300-10000_cl_pass0_src19.ximg exists
[Sun May  6 09:48:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500760101_pi300-10000_cl_pass0_src19.csv
[Sun May  6 09:48:07 2012] fullrun_mos2_xmm0500760101_pi300-10000_cl_pass0_src19_1.ximg exists
[Sun May  6 09:48:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500760101_pi300-10000_cl_pass0_src19.csv
[Sun May  6 09:48:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500760101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500760101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 09:48:08 2012] fullrun_mos2_xmm0500760101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sun May  6 09:48:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500760101_pi300-10000_cl_pass0_tfrozen_src19.csv
[Sun May  6 09:48:08 2012] fullrun_mos2_xmm0500760101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sun May  6 09:48:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500760101_pi300-10000_cl_pass0_tfrozen_src19.csv
[Sun May  6 09:48:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500760101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500760101_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 09:49:07 2012] Warning, spatial fit 19 centroid is now closest to src. 49
[Sun May  6 09:49:07 2012] Vigneting correction estimate = 1.000000
[Sun May  6 09:49:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 09:49:07 2012] Assessing source extent using major
[Sun May  6 09:49:07 2012] Source does appear to be extended
[Sun May  6 09:49:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 15:43:53 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Sun May  6 15:43:53 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Sun May  6 15:43:53 2012] source mask rpix=1.7, npix_max = 19, mask sum = 19, frac = 0.992
[Sun May  6 15:43:53 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 7.34"
[Sun May  6 20:28:01 2012] fullrun_mos2_xmm0500760101_pi300-10000_cl_pass1_src18.ximg exists
[Sun May  6 20:28:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500760101_pi300-10000_cl_pass1_src18.csv
[Sun May  6 20:28:01 2012] fullrun_mos2_xmm0500760101_pi300-10000_cl_pass1_src18_1.ximg exists
[Sun May  6 20:28:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500760101_pi300-10000_cl_pass1_src18.csv
[Sun May  6 20:28:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500760101_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500760101_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 20:28:02 2012] fullrun_mos2_xmm0500760101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sun May  6 20:28:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500760101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Sun May  6 20:28:02 2012] fullrun_mos2_xmm0500760101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sun May  6 20:28:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500760101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Sun May  6 20:28:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500760101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500760101_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 20:28:54 2012] Warning, spatial fit 18 centroid is now closest to src. 8
[Sun May  6 20:28:55 2012] Vigneting correction estimate = 1.000000
[Sun May  6 20:28:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 20:28:55 2012] Assessing source extent using major
[Sun May  6 20:28:55 2012] Source does appear to be extended
[Sun May  6 20:28:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 15:19:53 2012] XMMSAS src. selection expression = ellipse(24256.386902, 24474.622345, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May  8 15:19:53 2012] Writing source region out to fullrun_mos2_xmm0500760101_pi300-10000_pass1_cl_src51_src.reg
[Tue May  8 15:19:53 2012] Extracting stamp from image fullrun_mos2_xmm0500760101_pi300-10000_cl_sm2.00.img.gz, (242, 244) - (317, 319)
[Tue May  8 15:19:53 2012] XMMSAS bgd. selection expression = annulus(24256.386902, 24474.622345, 1087.500000, 2175.000000, X, Y) && !ellipse(25411.408800, 23767.337600, 984.448028, 984.448028, 0.000000, X, Y) && !ellipse(24813.762512, 23069.482605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24757.874146, 22489.860504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24675.366455, 23424.781281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26388.590485, 25098.185181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25375.752000, 24548.538000, 1091.928031, 1091.928031, 0.000000, X, Y) && !ellipse(26342.523000, 25442.748000, 1004.504029, 1004.504029, 0.000000, X, Y) && !ellipse(26727.531200, 26507.512000, 1103.512032, 1103.512032, 0.000000, X, Y) && !ellipse(25544.039200, 25653.168000, 2183.856063, 1440.176041, -0.000000, X, Y) && !ellipse(26525.406000, 26878.862000, 1129.280032, 1129.280032, 0.000000, X, Y) && !ellipse(25463.750854, 26487.718658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23706.575470, 25250.374115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25971.873016, 27425.023651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24860.070000, 25668.254000, 1114.488032, 1114.488032, 0.000000, X, Y) && !ellipse(24503.168000, 26407.010000, 2227.968064, 2227.968064, 0.000000, X, Y)
[Tue May  8 15:19:53 2012] Writing fullrun_mos2_xmm0500760101_pi300-10000_pass1_cl_src51.gif
[Tue May  8 15:45:19 2012] Mean detx,y = (-846.63, -780.09) 
[Tue May  8 15:45:22 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 15:45:49 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 15:45:49 2012] Setting source spectrum file to fullrun_mos2_xmm0500760101_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Tue May  8 15:45:49 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0500760101_pi300-10000_pass1_cl_src51_bgd.pi.gz
[Tue May  8 17:59:43 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May  8 17:59:43 2012] rmf not generated due to insufficient counts
[Tue May  8 18:35:24 2012] Updating aperture counts using extracted products
[Tue May  8 18:35:24 2012] Error reading totcts from fullrun_mos2_xmm0500760101_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Tue May  8 18:35:28 2012] Calculating source flux in energy range 0.30-8.00
[Tue May  8 18:35:28 2012] Using photon index=1.80, rate=0.00353, arf fullrun_mos2_xmm0500760101_pi300-10000_pass1_cl_src51.arf
[Tue May  8 18:35:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May  8 18:35:28 2012] Updating source flux to 4e-14
[Tue May  8 18:39:03 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting