[Sat May  5 18:39:46 2012] Detection parameters:
  Position = (287.2, 300.7) = 11 12 56.08 13 28 4.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.1 +/- 15.8
  Background counts = 57.4
  Rate = 0.002 +/- 0.0003

[Sat May  5 18:39:51 2012] Off-axis axis estimate = 0.83'
[Sun May  6 01:52:59 2012] Using EEF radius (= 6.85 ")to estimate initial spatial extent for simple fitting
[Sun May  6 01:52:59 2012] Initial guess for spatial extent in simple fitting = 6.85"
[Sun May  6 01:52:59 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.930
[Sun May  6 01:52:59 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 6.85"
[Sun May  6 05:45:09 2012] fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_src39.ximg exists
[Sun May  6 05:45:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_src39.csv
[Sun May  6 05:45:09 2012] fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_src39_1.ximg exists
[Sun May  6 05:45:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_src39.csv
[Sun May  6 05:45:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 05:45:11 2012] fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Sun May  6 05:45:11 2012] fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Sun May  6 05:45:11 2012] Fit fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Sun May  6 09:48:49 2012] Warning, spatial fit 39 centroid is now closest to src. 18
[Sun May  6 09:48:49 2012] Vigneting correction estimate = 1.000000
[Sun May  6 09:48:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 09:48:49 2012] Assessing source extent using major
[Sun May  6 09:48:49 2012] Source does appear to be extended
[Sun May  6 09:48:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 12:44:00 2012] Using EEF radius (= 6.85 ")to estimate initial spatial extent for simple fitting
[Sun May  6 12:44:00 2012] Initial guess for spatial extent in simple fitting = 6.85"
[Sun May  6 12:44:00 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.930
[Sun May  6 12:44:00 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 6.85"
[Sun May  6 15:43:52 2012] fullrun_mos1_xmm0500760101_pi300-10000_cl_pass1_src35.ximg exists
[Sun May  6 15:43:52 2012] fullrun_mos1_xmm0500760101_pi300-10000_cl_pass1_src35_1.ximg exists
[Sun May  6 15:43:52 2012] Fit fullrun_mos1_xmm0500760101_pi300-10000_cl_pass1_src35 appears to have run properly
[Sun May  6 15:43:53 2012] fullrun_mos1_xmm0500760101_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Sun May  6 15:43:53 2012] fullrun_mos1_xmm0500760101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Sun May  6 15:43:53 2012] Fit fullrun_mos1_xmm0500760101_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Sun May  6 20:28:38 2012] Source 31 is offset by 1.350719 and 4.410877 pixels which is larger than
2 X fitted extent = 1.181058 x 1.181058, not incorporating fit results
[Sun May  6 20:28:38 2012] Vigneting correction estimate = 1.000000
[Sun May  6 20:28:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 20:28:38 2012] Assessing source extent using major
[Sun May  6 20:28:38 2012] Source does appear to be extended
[Sun May  6 20:28:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 11:32:43 2012] XMMSAS src. selection expression = ellipse(24935.028320, 26111.052307, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May  8 11:32:43 2012] Writing source region out to fullrun_mos1_xmm0500760101_pi300-10000_pass1_cl_src31_src.reg
[Tue May  8 11:32:43 2012] Extracting stamp from image fullrun_mos1_xmm0500760101_pi300-10000_cl_sm2.00.img.gz, (250, 263) - (325, 338)
[Tue May  8 11:32:43 2012] XMMSAS bgd. selection expression = annulus(24935.028320, 26111.052307, 1087.500000, 2175.000000, X, Y) && !ellipse(25393.576000, 23772.474400, 1037.984030, 1037.984030, 0.000000, X, Y) && !ellipse(25665.020000, 24099.020000, 1120.960032, 1120.960032, 0.000000, X, Y) && !ellipse(26635.408000, 25219.980000, 1120.960032, 1120.960032, 0.000000, X, Y) && !ellipse(25697.643005, 24831.240570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26652.524000, 26344.024000, 1054.408030, 1054.408030, 0.000000, X, Y) && !ellipse(25711.717316, 25697.887268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26299.846130, 25964.807983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26663.688690, 27081.231873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26972.866000, 26512.170000, 1155.792033, 1155.792033, 0.000000, X, Y) && !ellipse(23669.975600, 25321.671200, 508.005615, 508.005615, 0.000000, X, Y) && !ellipse(25722.256000, 27185.444000, 1139.944033, 1139.944033, 0.000000, X, Y) && !ellipse(27050.847717, 23444.425842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27225.038000, 25259.834000, 1145.152033, 1145.152033, 0.000000, X, Y) && !ellipse(27673.906097, 27434.302979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27543.111389, 26911.732147, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May  8 11:32:43 2012] Writing fullrun_mos1_xmm0500760101_pi300-10000_pass1_cl_src31.gif
[Tue May  8 12:10:25 2012] Mean detx,y = (-1853.15, -524.83) 
[Tue May  8 12:10:29 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 12:10:53 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 12:10:54 2012] Setting source spectrum file to fullrun_mos1_xmm0500760101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Tue May  8 12:10:54 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0500760101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Tue May  8 15:19:31 2012] Not generating rmf since there are only 72 counts
[Tue May  8 15:19:31 2012] rmf not generated due to insufficient counts
[Tue May  8 18:35:19 2012] Updating aperture counts using extracted products
[Tue May  8 18:35:19 2012] Error reading totcts from fullrun_mos1_xmm0500760101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Tue May  8 18:35:23 2012] Calculating source flux in energy range 0.30-8.00
[Tue May  8 18:35:23 2012] Using photon index=1.80, rate=0.00151, arf fullrun_mos1_xmm0500760101_pi300-10000_pass1_cl_src31.arf
[Tue May  8 18:35:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May  8 18:35:23 2012] Updating source flux to 1.6e-14
[Tue May  8 18:35:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting