[Sat May  5 18:39:45 2012] Detection parameters:
  Position = (201.1, 321.9) = 11 13 21.76 13 29 35.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.6 +/- 10.8
  Background counts = 20.5
  Rate = 0.002 +/- 0.0003

[Sat May  5 18:39:51 2012] Off-axis axis estimate = 7.26'
[Sun May  6 01:52:59 2012] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Sun May  6 01:52:59 2012] Initial guess for spatial extent in simple fitting = 10.06"
[Sun May  6 01:52:59 2012] source mask rpix=2.3, npix_max = 31, mask sum = 33, frac = 1.043
[Sun May  6 01:52:59 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 10.06"
[Sun May  6 05:45:09 2012] fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_src30.ximg exists
[Sun May  6 05:45:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_src30.csv
[Sun May  6 05:45:09 2012] fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_src30_1.ximg exists
[Sun May  6 05:45:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_src30.csv
[Sun May  6 05:45:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 05:45:10 2012] fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Sun May  6 05:45:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_tfrozen_src30.csv
[Sun May  6 05:45:11 2012] fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Sun May  6 05:45:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_tfrozen_src30.csv
[Sun May  6 05:45:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 09:48:49 2012] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 11.795355 pixels away
[Sun May  6 09:48:49 2012] Vigneting correction estimate = 1.000000
[Sun May  6 09:48:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 09:48:49 2012] Assessing source extent using major
[Sun May  6 09:48:49 2012] Source does appear to be extended
[Sun May  6 09:48:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 12:44:00 2012] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Sun May  6 12:44:00 2012] Initial guess for spatial extent in simple fitting = 10.06"
[Sun May  6 12:44:00 2012] source mask rpix=2.3, npix_max = 31, mask sum = 33, frac = 1.043
[Sun May  6 12:44:00 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 10.06"
[Sun May  6 15:43:52 2012] fullrun_mos1_xmm0500760101_pi300-10000_cl_pass1_src28.ximg exists
[Sun May  6 15:43:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500760101_pi300-10000_cl_pass1_src28.csv
[Sun May  6 15:43:52 2012] fullrun_mos1_xmm0500760101_pi300-10000_cl_pass1_src28_1.ximg exists
[Sun May  6 15:43:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500760101_pi300-10000_cl_pass1_src28.csv
[Sun May  6 15:43:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500760101_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500760101_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 15:43:53 2012] fullrun_mos1_xmm0500760101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Sun May  6 15:43:53 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0500760101_pi300-10000_cl_pass1_tfrozen_src28.csv
[Sun May  6 15:43:53 2012] fullrun_mos1_xmm0500760101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Sun May  6 15:43:53 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0500760101_pi300-10000_cl_pass1_tfrozen_src28.csv
[Sun May  6 15:43:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500760101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500760101_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 20:28:38 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 13.057526 pixels away
[Sun May  6 20:28:38 2012] Vigneting correction estimate = 1.000000
[Sun May  6 20:28:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 20:28:38 2012] Assessing source extent using major
[Sun May  6 20:28:38 2012] Source does appear to be extended
[Sun May  6 20:28:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 11:32:43 2012] XMMSAS src. selection expression = ellipse(17444.410095, 27953.077118, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May  8 11:32:43 2012] Writing source region out to fullrun_mos1_xmm0500760101_pi300-10000_pass1_cl_src25_src.reg
[Tue May  8 11:32:43 2012] Extracting stamp from image fullrun_mos1_xmm0500760101_pi300-10000_cl_sm2.00.img.gz, (164, 284) - (239, 359)
[Tue May  8 11:32:43 2012] XMMSAS bgd. selection expression = annulus(17444.410095, 27953.077118, 1087.500000, 2175.000000, X, Y)
[Tue May  8 11:32:43 2012] Writing fullrun_mos1_xmm0500760101_pi300-10000_pass1_cl_src25.gif
[Tue May  8 12:03:05 2012] Mean detx,y = (-6183.03, 5841.34) 
[Tue May  8 12:03:08 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 12:04:17 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 12:04:17 2012] Setting source spectrum file to fullrun_mos1_xmm0500760101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Tue May  8 12:04:17 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0500760101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Tue May  8 14:58:04 2012] Not generating rmf since there are only 65 counts
[Tue May  8 14:58:04 2012] rmf not generated due to insufficient counts
[Tue May  8 18:35:18 2012] Updating aperture counts using extracted products
[Tue May  8 18:35:18 2012] Error reading totcts from fullrun_mos1_xmm0500760101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Tue May  8 18:35:21 2012] Calculating source flux in energy range 0.30-8.00
[Tue May  8 18:35:21 2012] Using photon index=1.80, rate=0.00208, arf fullrun_mos1_xmm0500760101_pi300-10000_pass1_cl_src25.arf
[Tue May  8 18:35:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May  8 18:35:21 2012] Updating source flux to 3.3e-14
[Tue May  8 18:35:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting