[Sat May  5 18:39:44 2012] Detection parameters:
  Position = (175.8, 235.9) = 11 13 29.28 13 23 13.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 148.7 +/- 17.1
  Background counts = 20.5
  Rate = 0.005 +/- 0.0006

[Sat May  5 18:39:51 2012] Off-axis axis estimate = 9.98'
[Sun May  6 01:52:59 2012] Using EEF radius (= 11.42 ")to estimate initial spatial extent for simple fitting
[Sun May  6 01:52:59 2012] Initial guess for spatial extent in simple fitting = 11.42"
[Sun May  6 01:52:59 2012] source mask rpix=2.6, npix_max = 39, mask sum = 30, frac = 0.768
[Sun May  6 01:52:59 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 11.42"
[Sun May  6 05:45:09 2012] fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_src12.ximg exists
[Sun May  6 05:45:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_src12.csv
[Sun May  6 05:45:09 2012] fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_src12_1.ximg exists
[Sun May  6 05:45:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_src12.csv
[Sun May  6 05:45:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 05:45:10 2012] fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sun May  6 05:45:10 2012] fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sun May  6 05:45:10 2012] Fit fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Sun May  6 09:48:49 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 14.697143 pixels away
[Sun May  6 09:48:49 2012] Vigneting correction estimate = 1.000000
[Sun May  6 09:48:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 09:48:49 2012] Assessing source extent using major
[Sun May  6 09:48:49 2012] Source does appear to be extended
[Sun May  6 09:48:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 12:44:00 2012] Using EEF radius (= 11.42 ")to estimate initial spatial extent for simple fitting
[Sun May  6 12:44:00 2012] Initial guess for spatial extent in simple fitting = 11.42"
[Sun May  6 12:44:00 2012] source mask rpix=2.6, npix_max = 39, mask sum = 30, frac = 0.768
[Sun May  6 12:44:00 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 11.42"
[Sun May  6 15:43:52 2012] fullrun_mos1_xmm0500760101_pi300-10000_cl_pass1_src12.ximg exists
[Sun May  6 15:43:52 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0500760101_pi300-10000_cl_pass1_src12.csv
[Sun May  6 15:43:52 2012] fullrun_mos1_xmm0500760101_pi300-10000_cl_pass1_src12_1.ximg exists
[Sun May  6 15:43:52 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0500760101_pi300-10000_cl_pass1_src12.csv
[Sun May  6 15:43:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500760101_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500760101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 15:43:52 2012] fullrun_mos1_xmm0500760101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sun May  6 15:43:52 2012] fullrun_mos1_xmm0500760101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sun May  6 15:43:52 2012] Fit fullrun_mos1_xmm0500760101_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Sun May  6 20:28:38 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 14.697143 pixels away
[Sun May  6 20:28:38 2012] Warning: source 36 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 21.885098 pixels away
[Sun May  6 20:28:38 2012] Vigneting correction estimate = 1.000000
[Sun May  6 20:28:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 20:28:38 2012] Assessing source extent using major
[Sun May  6 20:28:38 2012] Source does appear to be extended
[Sun May  6 20:28:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 11:32:43 2012] XMMSAS src. selection expression = ellipse(15243.850128, 20477.219528, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May  8 11:32:43 2012] Writing source region out to fullrun_mos1_xmm0500760101_pi300-10000_pass1_cl_src21_src.reg
[Tue May  8 11:32:43 2012] Extracting stamp from image fullrun_mos1_xmm0500760101_pi300-10000_cl_sm2.00.img.gz, (138, 198) - (213, 273)
[Tue May  8 11:32:43 2012] XMMSAS bgd. selection expression = annulus(15243.850128, 20477.219528, 1087.500000, 2175.000000, X, Y) && !ellipse(16212.922200, 22156.970400, 703.238420, 703.238420, 0.000000, X, Y)
[Tue May  8 11:32:43 2012] Writing fullrun_mos1_xmm0500760101_pi300-10000_pass1_cl_src21.gif
[Tue May  8 11:52:34 2012] Mean detx,y = (-15.60, 10562.28) 
[Tue May  8 11:52:37 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 11:53:32 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 11:53:33 2012] Setting source spectrum file to fullrun_mos1_xmm0500760101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Tue May  8 11:53:33 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0500760101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Tue May  8 14:12:57 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May  8 14:12:57 2012] rmf not generated due to insufficient counts
[Tue May  8 18:35:16 2012] Updating aperture counts using extracted products
[Tue May  8 18:35:16 2012] Error reading totcts from fullrun_mos1_xmm0500760101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Tue May  8 18:35:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue May  8 18:35:20 2012] Using photon index=1.80, rate=0.00536, arf fullrun_mos1_xmm0500760101_pi300-10000_pass1_cl_src21.arf
[Tue May  8 18:35:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May  8 18:35:20 2012] Updating source flux to 1.1e-13
[Tue May  8 18:35:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting