[Sat May  5 18:39:43 2012] Detection parameters:
  Position = (289.2, 355.2) = 11 12 55.48 13 32 6.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 432.7 +/- 24.1
  Background counts = 26.0
  Rate = 0.008 +/- 0.0005

[Sat May  5 18:39:51 2012] Off-axis axis estimate = 4.17'
[Sun May  6 01:52:59 2012] Using EEF radius (= 8.51 ")to estimate initial spatial extent for simple fitting
[Sun May  6 01:52:59 2012] Initial guess for spatial extent in simple fitting = 8.51"
[Sun May  6 01:52:59 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.828
[Sun May  6 01:52:59 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 8.51"
[Sun May  6 05:45:09 2012] fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_src6.ximg exists
[Sun May  6 05:45:09 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_src6.csv
[Sun May  6 05:45:09 2012] fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun May  6 05:45:09 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_src6.csv
[Sun May  6 05:45:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 05:45:10 2012] fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun May  6 05:45:10 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sun May  6 05:45:10 2012] fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun May  6 05:45:10 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sun May  6 05:45:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500760101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 09:48:49 2012] Spatial fit model total counts = -665.570000, observed total counts = 564.000000
[Sun May  6 09:48:49 2012] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  6 09:48:49 2012] Vigneting correction estimate = 1.000000
[Sun May  6 09:48:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 09:48:49 2012] Assessing source extent using major
[Sun May  6 09:48:49 2012] Source does appear to be extended
[Sun May  6 09:48:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 12:44:00 2012] Using EEF radius (= 8.51 ")to estimate initial spatial extent for simple fitting
[Sun May  6 12:44:00 2012] Initial guess for spatial extent in simple fitting = 8.51"
[Sun May  6 12:44:00 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.828
[Sun May  6 12:44:00 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 8.51"
[Sun May  6 15:43:52 2012] fullrun_mos1_xmm0500760101_pi300-10000_cl_pass1_src6.ximg exists
[Sun May  6 15:43:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500760101_pi300-10000_cl_pass1_src6.csv
[Sun May  6 15:43:52 2012] fullrun_mos1_xmm0500760101_pi300-10000_cl_pass1_src6_1.ximg exists
[Sun May  6 15:43:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500760101_pi300-10000_cl_pass1_src6.csv
[Sun May  6 15:43:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500760101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500760101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 15:43:52 2012] fullrun_mos1_xmm0500760101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sun May  6 15:43:52 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0500760101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sun May  6 15:43:52 2012] fullrun_mos1_xmm0500760101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sun May  6 15:43:52 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0500760101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sun May  6 15:43:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500760101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500760101_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 20:28:38 2012] Spatial fit model total counts = -461.083000, observed total counts = 564.000000
[Sun May  6 20:28:38 2012] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  6 20:28:38 2012] Vigneting correction estimate = 1.000000
[Sun May  6 20:28:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 20:28:38 2012] Assessing source extent using major
[Sun May  6 20:28:38 2012] Source does appear to be extended
[Sun May  6 20:28:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 11:32:42 2012] XMMSAS src. selection expression = ellipse(25110.329285, 30850.096405, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May  8 11:32:43 2012] Writing source region out to fullrun_mos1_xmm0500760101_pi300-10000_pass1_cl_src12_src.reg
[Tue May  8 11:32:43 2012] Extracting stamp from image fullrun_mos1_xmm0500760101_pi300-10000_cl_sm2.00.img.gz, (252, 318) - (327, 393)
[Tue May  8 11:32:43 2012] XMMSAS bgd. selection expression = annulus(25110.329285, 30850.096405, 1087.500000, 2175.000000, X, Y)
[Tue May  8 11:32:43 2012] Writing fullrun_mos1_xmm0500760101_pi300-10000_pass1_cl_src12.gif
[Tue May  8 11:47:48 2012] Mean detx,y = (-6307.35, -2362.28) 
[Tue May  8 11:47:52 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 11:48:34 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 11:48:35 2012] Setting source spectrum file to fullrun_mos1_xmm0500760101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Tue May  8 11:48:35 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0500760101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Tue May  8 13:32:44 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May  8 13:32:44 2012] rmf not generated due to insufficient counts
[Tue May  8 18:35:16 2012] Updating aperture counts using extracted products
[Tue May  8 18:35:16 2012] Error reading totcts from fullrun_mos1_xmm0500760101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Tue May  8 18:35:19 2012] Calculating source flux in energy range 0.30-8.00
[Tue May  8 18:35:19 2012] Using photon index=1.80, rate=0.0084, arf fullrun_mos1_xmm0500760101_pi300-10000_pass1_cl_src12.arf
[Tue May  8 18:35:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May  8 18:35:19 2012] Updating source flux to 1.4e-13
[Tue May  8 18:35:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting