[Tue Apr 10 16:53:14 2012] Detection parameters:
  Position = (295.4, 290.8) = 14 3 17.19 -41 21 52.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 179.4 +/- 31.6
  Background counts = 389.4
  Rate = 0.002 +/- 0.0003

[Tue Apr 10 16:53:15 2012] Off-axis axis estimate = 0.60'
[Tue Apr 10 16:53:47 2012] Using EEF radius (= 6.73 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 16:53:47 2012] Initial guess for spatial extent in simple fitting = 6.73"
[Tue Apr 10 16:53:47 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.955
[Tue Apr 10 16:53:47 2012] Giving source the simple spatial ID 56 for pass 0, mean size = 6.73"
[Tue Apr 10 16:53:48 2012] fullrun_pn_xmm0500750101_pi300-10000_cl_pass0_src56.ximg exists
[Tue Apr 10 16:53:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500750101_pi300-10000_cl_pass0_src56.csv
[Tue Apr 10 16:53:48 2012] fullrun_pn_xmm0500750101_pi300-10000_cl_pass0_src56_1.ximg exists
[Tue Apr 10 16:53:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500750101_pi300-10000_cl_pass0_src56.csv
[Tue Apr 10 16:53:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500750101_pi300-10000_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500750101_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:53:49 2012] fullrun_pn_xmm0500750101_pi300-10000_cl_pass0_tfrozen_src56.ximg exists
[Tue Apr 10 16:53:49 2012] fullrun_pn_xmm0500750101_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists
[Tue Apr 10 16:53:49 2012] Fit fullrun_pn_xmm0500750101_pi300-10000_cl_pass0_tfrozen_src56 appears to have run properly
[Tue Apr 10 16:54:01 2012] Spatial fit model total counts = 2846.390000, observed total counts = 2846.000000
[Tue Apr 10 16:54:01 2012] Offset between fit and detection position for source 60 = 7.210304 pixels
[Tue Apr 10 16:54:01 2012] 2772.225000 total counts/ 2384.090000 bgd. counts: snr = 7.949164
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 7.210304 pixels
  Position = (290.2, 285.8) = 14 3 19.21 -41 22 15.9
  Extent = 13.5 (13.4-26.9)", rotation angle = 0
  Source counts = 388.1 +/- 52.7
  Background counts = 2384.1
  Rate = 0.007 +/- 0.0009
[Tue Apr 10 16:54:01 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 16:54:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 16:54:01 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 16:54:01 2012] Source does appear to be extended
[Tue Apr 10 16:54:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 16:54:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 16:54:26 2012] Initial guess for spatial extent in simple fitting = 13.45"
[Tue Apr 10 16:54:26 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.949
[Tue Apr 10 16:54:26 2012] Giving source the simple spatial ID 54 for pass 1, mean size = 13.45"
[Tue Apr 10 16:54:28 2012] fullrun_pn_xmm0500750101_pi300-10000_cl_pass1_src54.ximg exists
[Tue Apr 10 16:54:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500750101_pi300-10000_cl_pass1_src54.csv
[Tue Apr 10 16:54:28 2012] fullrun_pn_xmm0500750101_pi300-10000_cl_pass1_src54_1.ximg exists
[Tue Apr 10 16:54:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500750101_pi300-10000_cl_pass1_src54.csv
[Tue Apr 10 16:54:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500750101_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500750101_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:54:29 2012] fullrun_pn_xmm0500750101_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Tue Apr 10 16:54:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500750101_pi300-10000_cl_pass1_tfrozen_src54.csv
[Tue Apr 10 16:54:29 2012] fullrun_pn_xmm0500750101_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Tue Apr 10 16:54:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500750101_pi300-10000_cl_pass1_tfrozen_src54.csv
[Tue Apr 10 16:54:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500750101_pi300-10000_cl_pass1_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500750101_pi300-10000_cl_pass1_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:54:40 2012] Warning, spatial fit 54 centroid is now closest to src. 41
[Tue Apr 10 16:54:40 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 16:54:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 16:54:40 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 16:54:40 2012] Source does appear to be extended
[Tue Apr 10 16:54:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 16:55:05 2012] XMMSAS src. selection expression = ellipse(25199.182000, 24817.380000, 807.180023, 807.180023, 0.000000, X, Y)
[Tue Apr 10 16:55:05 2012] Not overwriting source region fullrun_pn_xmm0500750101_pi300-10000_pass1_cl_src60_src.reg
[Tue Apr 10 16:55:05 2012] Extracting stamp from image fullrun_pn_xmm0500750101_pi300-10000_cl_sm2.00.img.gz, (244, 239) - (337, 332)
[Tue Apr 10 16:55:05 2012] XMMSAS bgd. selection expression = annulus(25199.182000, 24817.380000, 1345.300039, 2690.600077, X, Y) && !ellipse(23434.915336, 21031.804202, 1376.934592, 923.927505, 352.011683, X, Y) && !ellipse(25140.439000, 23997.344800, 1420.567241, 1420.567241, 0.000000, X, Y) && !ellipse(22370.692000, 24492.181600, 416.866412, 416.866412, 0.000000, X, Y) && !ellipse(23046.099000, 24165.746000, 371.106411, 371.106411, 0.000000, X, Y) && !ellipse(24061.874146, 28124.254822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24370.086000, 27235.344000, 1200.016035, 1200.016035, 0.000000, X, Y) && !ellipse(23583.996200, 27259.287200, 333.319210, 333.319210, 0.000000, X, Y) && !ellipse(26982.128448, 24578.055123, 1345.411657, 506.502321, 81.313759, X, Y)
[Tue Apr 10 16:55:05 2012] Writing fullrun_pn_xmm0500750101_pi300-10000_pass1_cl_src60.gif
[Tue Apr 10 16:55:18 2012] ../../xmm0500750101/products/events/fullrun_pn_xmm0500750101_pi300-10000_pass1_cl_src60_src.evt and ../../xmm0500750101/products/events/fullrun_pn_xmm0500750101_pi300-10000_pass1_cl_src60_bgd.evt exist, delete to re-create
[Tue Apr 10 16:55:18 2012] Mean detx,y = (62.51, 14.53) 
[Tue Apr 10 16:55:18 2012] ../../xmm0500750101/products/images/fullrun_pn_xmm0500750101_pi300-10000_pass1_cl_src60_src.img and ../../xmm0500750101/products/images/fullrun_pn_xmm0500750101_pi300-10000_pass1_cl_src60_bgd.img exist, delete to re-create
[Tue Apr 10 16:55:18 2012] ../../xmm0500750101/products/spectra/fullrun_pn_xmm0500750101_pi300-10000_pass1_cl_src60_src_b10.pi.gz and ../../xmm0500750101/products/spectra/fullrun_pn_xmm0500750101_pi300-10000_pass1_cl_src60_bgd.pi exist, delete to re-create
[Tue Apr 10 16:55:18 2012] Setting source spectrum file to fullrun_pn_xmm0500750101_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Tue Apr 10 16:55:18 2012] Setting bgd. spectrum file to fullrun_pn_xmm0500750101_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Tue Apr 10 16:55:18 2012] ../../xmm0500750101/products/lightcurves/fullrun_pn_xmm0500750101_pi300-10000_pass1_cl_src60_src.lc and ../../xmm0500750101/products/lightcurves/fullrun_pn_xmm0500750101_pi300-10000_pass1_cl_src60_bgd.lc exist, delete to re-create
[Tue Apr 10 16:55:27 2012] fullrun_pn_xmm0500750101_pi300-10000_pass1_cl_src60.rmf exists, delete to re-create
[Tue Apr 10 16:55:27 2012] fullrun_pn_xmm0500750101_pi300-10000_pass1_cl_src60.arf exists, delete to re-create
[Tue Apr 10 16:58:20 2012] Updating aperture counts using extracted products
[Tue Apr 10 16:58:20 2012] Error reading totcts from fullrun_pn_xmm0500750101_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Tue Apr 10 16:58:22 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 16:58:22 2012] Using photon index=1.80, rate=0.00674, arf fullrun_pn_xmm0500750101_pi300-10000_pass1_cl_src60.arf
[Tue Apr 10 16:58:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 16:58:22 2012] Updating source flux to 1.6e-14