[Tue Apr 10 16:53:20 2012] Detection parameters:
  Position = (251.2, 251.9) = 14 3 34.30 -41 24 44.3
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 141.6 +/- 21.2
  Background counts = 858.1
  Rate = 0.002 +/- 0.0003

[Tue Apr 10 16:53:20 2012] Off-axis axis estimate = 4.81'
[Tue Apr 10 16:53:50 2012] Using EEF radius (= 8.83 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 16:53:50 2012] Initial guess for spatial extent in simple fitting = 8.83"
[Tue Apr 10 16:53:50 2012] source mask rpix=2.0, npix_max = 25, mask sum = 17, frac = 0.664
[Tue Apr 10 16:53:50 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 8.83"
[Tue Apr 10 16:53:51 2012] fullrun_mos2_xmm0500750101_pi300-10000_cl_pass0_src31.ximg exists
[Tue Apr 10 16:53:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500750101_pi300-10000_cl_pass0_src31.csv
[Tue Apr 10 16:53:51 2012] fullrun_mos2_xmm0500750101_pi300-10000_cl_pass0_src31_1.ximg exists
[Tue Apr 10 16:53:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500750101_pi300-10000_cl_pass0_src31.csv
[Tue Apr 10 16:53:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500750101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500750101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:53:51 2012] fullrun_mos2_xmm0500750101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Tue Apr 10 16:53:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500750101_pi300-10000_cl_pass0_tfrozen_src31.csv
[Tue Apr 10 16:53:51 2012] fullrun_mos2_xmm0500750101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Tue Apr 10 16:53:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500750101_pi300-10000_cl_pass0_tfrozen_src31.csv
[Tue Apr 10 16:53:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500750101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500750101_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:54:11 2012] Source 45 is offset by -6.844688 and -7.142783 pixels which is larger than
2 X fitted extent = 0.878694 x 0.878694, not incorporating fit results
[Tue Apr 10 16:54:11 2012] Source 45 is offset by 7.888025 and -3.490462 pixels which is larger than
2 X fitted extent = 5.089058 x 5.089058, not incorporating fit results
[Tue Apr 10 16:54:11 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 16:54:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 16:54:11 2012] Assessing source extent using major
[Tue Apr 10 16:54:11 2012] Source does appear to be extended
[Tue Apr 10 16:54:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 16:54:11 2012] Source is confused with source 1
[Tue Apr 10 16:54:30 2012] Using EEF radius (= 8.83 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 16:54:30 2012] Initial guess for spatial extent in simple fitting = 8.83"
[Tue Apr 10 16:54:30 2012] source mask rpix=2.0, npix_max = 25, mask sum = 17, frac = 0.664
[Tue Apr 10 16:54:30 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 8.83"
[Tue Apr 10 16:54:31 2012] fullrun_mos2_xmm0500750101_pi300-10000_cl_pass1_src30.ximg exists
[Tue Apr 10 16:54:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500750101_pi300-10000_cl_pass1_src30.csv
[Tue Apr 10 16:54:31 2012] fullrun_mos2_xmm0500750101_pi300-10000_cl_pass1_src30_1.ximg exists
[Tue Apr 10 16:54:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0500750101_pi300-10000_cl_pass1_src30.csv
[Tue Apr 10 16:54:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0500750101_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0500750101_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:54:31 2012] fullrun_mos2_xmm0500750101_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Tue Apr 10 16:54:31 2012] fullrun_mos2_xmm0500750101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Tue Apr 10 16:54:31 2012] Fit fullrun_mos2_xmm0500750101_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Tue Apr 10 16:54:50 2012] Spatial fit model total counts = 2043.900000, observed total counts = 2037.000000
[Tue Apr 10 16:54:50 2012] Offset between fit and detection position for source 45 = 9.288837 pixels
[Tue Apr 10 16:54:50 2012] 1644.279000 total counts/ 1109.230000 bgd. counts: snr = 16.065075
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 9.288837 pixels
  Position = (258.7, 246.5) = 14 3 31.38 -41 25 7.0
  Extent = 17.6 (17.6-17.6)", rotation angle = 0
  Source counts = 535.0 +/- 40.5
  Background counts = 1109.2
  Rate = 0.006 +/- 0.0005
[Tue Apr 10 16:54:50 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 16:54:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 16:54:50 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 16:54:50 2012] Source does appear to be extended
[Tue Apr 10 16:54:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 16:55:35 2012] XMMSAS src. selection expression = ellipse(22461.520000, 21395.004000, 1054.908030, 1054.908030, 0.000000, X, Y)
[Tue Apr 10 16:55:35 2012] Not overwriting source region fullrun_mos2_xmm0500750101_pi300-10000_pass1_cl_src45_src.reg
[Tue Apr 10 16:55:35 2012] Extracting stamp from image fullrun_mos2_xmm0500750101_pi300-10000_cl_sm2.00.img.gz, (198, 186) - (319, 307)
[Tue Apr 10 16:55:35 2012] XMMSAS bgd. selection expression = annulus(22461.520000, 21395.004000, 1758.180051, 3516.360101, X, Y) && !ellipse(25134.563000, 24002.173000, 1265.191236, 1265.191236, 0.000000, X, Y) && !ellipse(21028.816400, 22321.265000, 395.008811, 395.008811, 0.000000, X, Y) && !ellipse(23031.200000, 24177.497200, 332.852010, 332.852010, 0.000000, X, Y) && !ellipse(22381.430740, 24500.864200, 278.584808, 278.584808, 0.000000, X, Y) && !ellipse(24267.718567, 25153.919556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24620.080780, 23188.223480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24276.259796, 24404.282654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23297.794800, 20046.763200, 427.869612, 427.869612, 0.000000, X, Y) && !ellipse(21982.704773, 23293.429016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22564.509308, 18012.439011, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(20605.345932, 23066.094788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21385.332474, 21343.831711, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Apr 10 16:55:35 2012] Writing fullrun_mos2_xmm0500750101_pi300-10000_pass1_cl_src45.gif
[Tue Apr 10 16:55:36 2012] ../../xmm0500750101/products/events/fullrun_mos2_xmm0500750101_pi300-10000_pass1_cl_src45_src.evt and ../../xmm0500750101/products/events/fullrun_mos2_xmm0500750101_pi300-10000_pass1_cl_src45_bgd.evt exist, delete to re-create
[Tue Apr 10 16:55:36 2012] Mean detx,y = (-3233.34, 1942.90) 
[Tue Apr 10 16:55:36 2012] ../../xmm0500750101/products/images/fullrun_mos2_xmm0500750101_pi300-10000_pass1_cl_src45_src.img and ../../xmm0500750101/products/images/fullrun_mos2_xmm0500750101_pi300-10000_pass1_cl_src45_bgd.img exist, delete to re-create
[Tue Apr 10 16:55:36 2012] ../../xmm0500750101/products/spectra/fullrun_mos2_xmm0500750101_pi300-10000_pass1_cl_src45_src_b10.pi.gz and ../../xmm0500750101/products/spectra/fullrun_mos2_xmm0500750101_pi300-10000_pass1_cl_src45_bgd.pi exist, delete to re-create
[Tue Apr 10 16:55:36 2012] Setting source spectrum file to fullrun_mos2_xmm0500750101_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Tue Apr 10 16:55:36 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0500750101_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Tue Apr 10 16:55:36 2012] ../../xmm0500750101/products/lightcurves/fullrun_mos2_xmm0500750101_pi300-10000_pass1_cl_src45_src.lc and ../../xmm0500750101/products/lightcurves/fullrun_mos2_xmm0500750101_pi300-10000_pass1_cl_src45_bgd.lc exist, delete to re-create
[Tue Apr 10 16:55:41 2012] fullrun_mos2_xmm0500750101_pi300-10000_pass1_cl_src45.rmf exists, delete to re-create
[Tue Apr 10 16:55:41 2012] fullrun_mos2_xmm0500750101_pi300-10000_pass1_cl_src45.arf exists, delete to re-create
[Tue Apr 10 16:58:26 2012] Updating aperture counts using extracted products
[Tue Apr 10 16:58:26 2012] Error reading totcts from fullrun_mos2_xmm0500750101_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Tue Apr 10 16:58:27 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 16:58:27 2012] Using photon index=1.80, rate=0.00619, arf fullrun_mos2_xmm0500750101_pi300-10000_pass1_cl_src45.arf
[Tue Apr 10 16:58:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 16:58:27 2012] Updating source flux to 6.6e-14
[Tue Apr 10 16:59:20 2012] Flag b found in src. 45 procflags, skipping spectral fitting
[Tue Apr 10 16:59:20 2012] Flag c found in src. 45 procflags, skipping spectral fitting