[Tue Apr 10 16:53:17 2012] Detection parameters:
  Position = (225.5, 169.0) = 14 3 44.28 -41 30 39.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 187.5 +/- 27.6
  Background counts = 229.2
  Rate = 0.003 +/- 0.0004

[Tue Apr 10 16:53:17 2012] Off-axis axis estimate = 10.77'
[Tue Apr 10 16:53:49 2012] Using EEF radius (= 11.81 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 16:53:49 2012] Initial guess for spatial extent in simple fitting = 11.81"
[Tue Apr 10 16:53:49 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.015
[Tue Apr 10 16:53:49 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 11.81"
[Tue Apr 10 16:53:49 2012] fullrun_mos1_xmm0500750101_pi300-10000_cl_pass0_src17.ximg exists
[Tue Apr 10 16:53:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500750101_pi300-10000_cl_pass0_src17.csv
[Tue Apr 10 16:53:49 2012] fullrun_mos1_xmm0500750101_pi300-10000_cl_pass0_src17_1.ximg exists
[Tue Apr 10 16:53:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500750101_pi300-10000_cl_pass0_src17.csv
[Tue Apr 10 16:53:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500750101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500750101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:53:50 2012] fullrun_mos1_xmm0500750101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Tue Apr 10 16:53:50 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0500750101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Tue Apr 10 16:53:50 2012] fullrun_mos1_xmm0500750101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Tue Apr 10 16:53:50 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0500750101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Tue Apr 10 16:53:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500750101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500750101_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:54:06 2012] Spatial fit model total counts = 667.738000, observed total counts = 1355.000000
[Tue Apr 10 16:54:06 2012] Poor agreement between spatial fit and data for source 42
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Apr 10 16:54:06 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 42 at 11.050378 pixels away
[Tue Apr 10 16:54:06 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 16:54:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 16:54:06 2012] Assessing source extent using major
[Tue Apr 10 16:54:06 2012] Source does appear to be extended
[Tue Apr 10 16:54:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 16:54:29 2012] Using EEF radius (= 11.81 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 16:54:29 2012] Initial guess for spatial extent in simple fitting = 11.81"
[Tue Apr 10 16:54:29 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.015
[Tue Apr 10 16:54:29 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 11.81"
[Tue Apr 10 16:54:29 2012] fullrun_mos1_xmm0500750101_pi300-10000_cl_pass1_src16.ximg exists
[Tue Apr 10 16:54:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500750101_pi300-10000_cl_pass1_src16.csv
[Tue Apr 10 16:54:29 2012] fullrun_mos1_xmm0500750101_pi300-10000_cl_pass1_src16_1.ximg exists
[Tue Apr 10 16:54:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500750101_pi300-10000_cl_pass1_src16.csv
[Tue Apr 10 16:54:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500750101_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500750101_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:54:30 2012] fullrun_mos1_xmm0500750101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Tue Apr 10 16:54:30 2012] fullrun_mos1_xmm0500750101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Tue Apr 10 16:54:30 2012] Fit fullrun_mos1_xmm0500750101_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Tue Apr 10 16:54:45 2012] Spatial fit model total counts = 1359.160000, observed total counts = 1355.000000
[Tue Apr 10 16:54:45 2012] Offset between fit and detection position for source 42 = 7.241695 pixels
[Tue Apr 10 16:54:45 2012] 1371.721000 total counts/ 685.200000 bgd. counts: snr = 26.226791
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 7.241695 pixels
  Position = (219.5, 173.1) = 14 3 46.60 -41 30 26.0
  Extent = 23.6 (23.6-23.6)", rotation angle = 0
  Source counts = 686.5 +/- 37.0
  Background counts = 685.2
  Rate = 0.008 +/- 0.0004
[Tue Apr 10 16:54:45 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 16:54:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 16:54:45 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 16:54:45 2012] Source does appear to be extended
[Tue Apr 10 16:54:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 16:55:28 2012] XMMSAS src. selection expression = ellipse(19046.758000, 15011.206000, 1417.272041, 1417.272041, 0.000000, X, Y)
[Tue Apr 10 16:55:28 2012] Not overwriting source region fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src42_src.reg
[Tue Apr 10 16:55:28 2012] Extracting stamp from image fullrun_mos1_xmm0500750101_pi300-10000_cl_sm2.00.img.gz, (138, 92) - (301, 255)
[Tue Apr 10 16:55:28 2012] XMMSAS bgd. selection expression = annulus(19046.758000, 15011.206000, 2362.120068, 4724.240136, X, Y) && !ellipse(20503.443253, 14200.831161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22664.223166, 13535.369745, 515.105147, 336.208084, 8.531612, X, Y) && !ellipse(23246.204010, 20112.490189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18054.440200, 12995.243800, 762.473622, 370.300011, 41.368414, X, Y) && !ellipse(23493.676636, 15519.610764, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(19941.569053, 12253.361862, 388.350081, 169.696539, 359.945056, X, Y) && !ellipse(19995.906525, 10351.290245, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Apr 10 16:55:28 2012] Writing fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src42.gif
[Tue Apr 10 16:55:29 2012] ../../xmm0500750101/products/events/fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src42_src.evt and ../../xmm0500750101/products/events/fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src42_bgd.evt exist, delete to re-create
[Tue Apr 10 16:55:29 2012] Mean detx,y = (7739.39, 7725.50) 
[Tue Apr 10 16:55:29 2012] ../../xmm0500750101/products/images/fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src42_src.img and ../../xmm0500750101/products/images/fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src42_bgd.img exist, delete to re-create
[Tue Apr 10 16:55:29 2012] ../../xmm0500750101/products/spectra/fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src42_src_b10.pi.gz and ../../xmm0500750101/products/spectra/fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src42_bgd.pi exist, delete to re-create
[Tue Apr 10 16:55:29 2012] Setting source spectrum file to fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Tue Apr 10 16:55:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Tue Apr 10 16:55:29 2012] ../../xmm0500750101/products/lightcurves/fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src42_src.lc and ../../xmm0500750101/products/lightcurves/fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src42_bgd.lc exist, delete to re-create
[Tue Apr 10 16:55:34 2012] fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src42.rmf exists, delete to re-create
[Tue Apr 10 16:55:34 2012] fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src42.arf exists, delete to re-create
[Tue Apr 10 16:58:23 2012] Updating aperture counts using extracted products
[Tue Apr 10 16:58:23 2012] Error reading totcts from fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Tue Apr 10 16:58:24 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 16:58:24 2012] Using photon index=1.80, rate=0.00788, arf fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src42.arf
[Tue Apr 10 16:58:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 16:58:24 2012] Updating source flux to 1e-13
[Tue Apr 10 16:58:30 2012] Flag p found in src. 42 procflags, skipping spectral fitting