[Tue Apr 10 16:53:17 2012] Detection parameters:
  Position = (237.6, 264.7) = 14 3 39.55 -41 23 39.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.3 +/- 27.2
  Background counts = 262.6
  Rate = 0.001 +/- 0.0003

[Tue Apr 10 16:53:17 2012] Off-axis axis estimate = 5.04'
[Tue Apr 10 16:53:49 2012] Using EEF radius (= 8.95 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 16:53:49 2012] Initial guess for spatial extent in simple fitting = 8.95"
[Tue Apr 10 16:53:49 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.956
[Tue Apr 10 16:53:49 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 8.95"
[Tue Apr 10 16:53:49 2012] fullrun_mos1_xmm0500750101_pi300-10000_cl_pass0_src35.ximg exists
[Tue Apr 10 16:53:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500750101_pi300-10000_cl_pass0_src35.csv
[Tue Apr 10 16:53:49 2012] fullrun_mos1_xmm0500750101_pi300-10000_cl_pass0_src35_1.ximg exists
[Tue Apr 10 16:53:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500750101_pi300-10000_cl_pass0_src35.csv
[Tue Apr 10 16:53:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500750101_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500750101_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:53:50 2012] fullrun_mos1_xmm0500750101_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Tue Apr 10 16:53:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500750101_pi300-10000_cl_pass0_tfrozen_src35.csv
[Tue Apr 10 16:53:50 2012] fullrun_mos1_xmm0500750101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Tue Apr 10 16:53:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500750101_pi300-10000_cl_pass0_tfrozen_src35.csv
[Tue Apr 10 16:53:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500750101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500750101_pi300-10000_cl_pass0_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:54:06 2012] Source 37 is offset by -4.601439 and 7.684197 pixels which is larger than
2 X fitted extent = 1.336768 x 1.336768, not incorporating fit results
[Tue Apr 10 16:54:06 2012] Source 37 is offset by -7.681071 and 0.703898 pixels which is larger than
2 X fitted extent = 0.964529 x 4.287389, not incorporating fit results
[Tue Apr 10 16:54:06 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 16:54:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 16:54:06 2012] Assessing source extent using major
[Tue Apr 10 16:54:06 2012] Source does appear to be extended
[Tue Apr 10 16:54:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 16:54:29 2012] Using EEF radius (= 8.95 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 16:54:29 2012] Initial guess for spatial extent in simple fitting = 8.95"
[Tue Apr 10 16:54:29 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.956
[Tue Apr 10 16:54:29 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 8.95"
[Tue Apr 10 16:54:30 2012] fullrun_mos1_xmm0500750101_pi300-10000_cl_pass1_src32.ximg exists
[Tue Apr 10 16:54:30 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0500750101_pi300-10000_cl_pass1_src32.csv
[Tue Apr 10 16:54:30 2012] fullrun_mos1_xmm0500750101_pi300-10000_cl_pass1_src32_1.ximg exists
[Tue Apr 10 16:54:30 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0500750101_pi300-10000_cl_pass1_src32.csv
[Tue Apr 10 16:54:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500750101_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500750101_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:54:30 2012] fullrun_mos1_xmm0500750101_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Tue Apr 10 16:54:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500750101_pi300-10000_cl_pass1_tfrozen_src32.csv
[Tue Apr 10 16:54:30 2012] fullrun_mos1_xmm0500750101_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Tue Apr 10 16:54:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500750101_pi300-10000_cl_pass1_tfrozen_src32.csv
[Tue Apr 10 16:54:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500750101_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500750101_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:54:45 2012] Source 37 is offset by -4.546933 and -8.516056 pixels which is larger than
2 X fitted extent = 1.028731 x 1.028731, not incorporating fit results
[Tue Apr 10 16:54:45 2012] Source 37 is offset by -7.681071 and 0.474519 pixels which is larger than
2 X fitted extent = 2.010602 x 2.010602, not incorporating fit results
[Tue Apr 10 16:54:45 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 16:54:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 16:54:45 2012] Assessing source extent using major
[Tue Apr 10 16:54:45 2012] Source does appear to be extended
[Tue Apr 10 16:54:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 16:55:28 2012] XMMSAS src. selection expression = ellipse(20622.932846, 22981.601135, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Apr 10 16:55:28 2012] Not overwriting source region fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src37_src.reg
[Tue Apr 10 16:55:28 2012] Extracting stamp from image fullrun_mos1_xmm0500750101_pi300-10000_cl_sm2.00.img.gz, (200, 227) - (275, 302)
[Tue Apr 10 16:55:28 2012] XMMSAS bgd. selection expression = annulus(20622.932846, 22981.601135, 1087.500000, 2175.000000, X, Y) && !ellipse(21025.701000, 22310.833000, 397.920811, 397.920811, 0.000000, X, Y) && !ellipse(23030.839800, 24175.349800, 310.073609, 281.113608, 49.953000, X, Y) && !ellipse(22386.078020, 24507.279600, 258.919207, 258.919207, 0.000000, X, Y) && !ellipse(23246.204010, 20112.490189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21998.099960, 23299.041748, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Apr 10 16:55:28 2012] Writing fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src37.gif
[Tue Apr 10 16:55:29 2012] ../../xmm0500750101/products/events/fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src37_src.evt and ../../xmm0500750101/products/events/fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src37_bgd.evt exist, delete to re-create
[Tue Apr 10 16:55:29 2012] Mean detx,y = (401.79, 4393.28) 
[Tue Apr 10 16:55:29 2012] ../../xmm0500750101/products/images/fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src37_src.img and ../../xmm0500750101/products/images/fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src37_bgd.img exist, delete to re-create
[Tue Apr 10 16:55:29 2012] ../../xmm0500750101/products/spectra/fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src37_src_b10.pi.gz and ../../xmm0500750101/products/spectra/fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src37_bgd.pi exist, delete to re-create
[Tue Apr 10 16:55:29 2012] Setting source spectrum file to fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Tue Apr 10 16:55:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Tue Apr 10 16:55:29 2012] ../../xmm0500750101/products/lightcurves/fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src37_src.lc and ../../xmm0500750101/products/lightcurves/fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src37_bgd.lc exist, delete to re-create
[Tue Apr 10 16:55:34 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Apr 10 16:55:34 2012] rmf not generated due to insufficient counts
[Tue Apr 10 16:55:34 2012] fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src37.arf exists, delete to re-create
[Tue Apr 10 16:58:23 2012] Updating aperture counts using extracted products
[Tue Apr 10 16:58:24 2012] Error reading totcts from fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Tue Apr 10 16:58:25 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 16:58:25 2012] Using photon index=1.80, rate=0.00124, arf fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src37.arf
[Tue Apr 10 16:58:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 16:58:25 2012] Updating source flux to 1.3e-14
[Tue Apr 10 16:58:30 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting