[Tue Apr 10 16:53:15 2012] Detection parameters:
  Position = (289.4, 276.3) = 14 3 19.52 -41 22 56.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27202.2 +/- 198.4
  Background counts = 265.8
  Rate = 0.2 +/- 0.002

[Tue Apr 10 16:53:17 2012] Off-axis axis estimate = 1.74'
[Tue Apr 10 16:53:49 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 16:53:49 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Tue Apr 10 16:53:49 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.055
[Tue Apr 10 16:53:49 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Tue Apr 10 16:53:49 2012] fullrun_mos1_xmm0500750101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Apr 10 16:53:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500750101_pi300-10000_cl_pass0_src1.csv
[Tue Apr 10 16:53:49 2012] fullrun_mos1_xmm0500750101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Apr 10 16:53:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0500750101_pi300-10000_cl_pass0_src1.csv
[Tue Apr 10 16:53:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500750101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500750101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:53:50 2012] fullrun_mos1_xmm0500750101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Apr 10 16:53:50 2012] fullrun_mos1_xmm0500750101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Apr 10 16:53:50 2012] Fit fullrun_mos1_xmm0500750101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Apr 10 16:54:06 2012] Spatial fit model total counts = 19766.500000, observed total counts = 19748.000000
[Tue Apr 10 16:54:06 2012] Offset between fit and detection position for source 3 = 0.204302 pixels
[Tue Apr 10 16:54:06 2012] 19845.050000 total counts/ 5090.050000 bgd. counts: snr = 206.813169
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.204302 pixels
  Position = (289.5, 276.5) = 14 3 19.49 -41 22 56.6
  Extent = 5.4 (5.3-5.4)", rotation angle = 0
  Source counts = 14755.0 +/- 140.9
  Background counts = 5090.1
  Rate = 0.2 +/- 0.002
[Tue Apr 10 16:54:06 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 16:54:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 16:54:06 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 16:54:06 2012] Source does appear to be extended
[Tue Apr 10 16:54:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 16:54:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 16:54:29 2012] Initial guess for spatial extent in simple fitting = 5.35"
[Tue Apr 10 16:54:29 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.751
[Tue Apr 10 16:54:29 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.35"
[Tue Apr 10 16:54:29 2012] fullrun_mos1_xmm0500750101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Apr 10 16:54:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0500750101_pi300-10000_cl_pass1_src1.csv
[Tue Apr 10 16:54:29 2012] fullrun_mos1_xmm0500750101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Apr 10 16:54:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0500750101_pi300-10000_cl_pass1_src1.csv
[Tue Apr 10 16:54:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0500750101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0500750101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 16:54:30 2012] fullrun_mos1_xmm0500750101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Apr 10 16:54:30 2012] fullrun_mos1_xmm0500750101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Apr 10 16:54:30 2012] Fit fullrun_mos1_xmm0500750101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Apr 10 16:54:45 2012] Spatial fit model total counts = 19766.400000, observed total counts = 19748.000000
[Tue Apr 10 16:54:45 2012] Offset between fit and detection position for source 3 = 0.000002 pixels
[Tue Apr 10 16:54:45 2012] 19844.970000 total counts/ 5090.170000 bgd. counts: snr = 206.807928
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000002 pixels
  Position = (289.5, 276.5) = 14 3 19.49 -41 22 56.6
  Extent = 5.4 (5.3-5.4)", rotation angle = 0
  Source counts = 14754.8 +/- 140.9
  Background counts = 5090.2
  Rate = 0.2 +/- 0.002
[Tue Apr 10 16:54:45 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 16:54:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 16:54:45 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 16:54:45 2012] Source does appear to be extended
[Tue Apr 10 16:54:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 16:55:27 2012] Counts = 14754.800000, rescaling region sizes by 3.000000
[Tue Apr 10 16:55:27 2012] XMMSAS src. selection expression = ellipse(25135.602000, 24003.393800, 963.626428, 963.626428, 0.000000, X, Y)
[Tue Apr 10 16:55:27 2012] Not overwriting source region fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src3_src.reg
[Tue Apr 10 16:55:27 2012] Extracting stamp from image fullrun_mos1_xmm0500750101_pi300-10000_cl_sm2.00.img.gz, (234, 221) - (345, 332)
[Tue Apr 10 16:55:27 2012] XMMSAS bgd. selection expression = annulus(25135.602000, 24003.393800, 4818.132139, 9636.264277, X, Y) && !ellipse(21025.701000, 22310.833000, 397.920811, 397.920811, 0.000000, X, Y) && !ellipse(20503.443253, 14200.831161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19498.906200, 28785.230400, 447.915213, 447.915213, 0.000000, X, Y) && !ellipse(23030.839800, 24175.349800, 310.073609, 281.113608, 49.953000, X, Y) && !ellipse(17034.315598, 24064.359253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23451.940520, 28221.613000, 276.142408, 276.142408, 0.000000, X, Y) && !ellipse(18164.505000, 27935.808000, 1574.000045, 1574.000045, 0.000000, X, Y) && !ellipse(32702.959045, 18963.657684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22386.078020, 24507.279600, 258.919207, 258.919207, 0.000000, X, Y) && !ellipse(23246.204010, 20112.490189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19046.758000, 15011.206000, 1889.696054, 1889.696054, 0.000000, X, Y) && !ellipse(33921.452168, 21052.198837, 576.251956, 322.082896, 111.761093, X, Y) && !ellipse(23493.676636, 15519.610764, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(30950.183044, 15379.994720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25843.814600, 28477.959400, 368.080011, 368.080011, 0.000000, X, Y) && !ellipse(32289.499298, 25061.750214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24018.800800, 28117.864800, 266.680808, 266.680808, 0.000000, X, Y) && !ellipse(15518.432400, 25970.440000, 1706.720049, 1706.720049, 0.000000, X, Y) && !ellipse(24650.600000, 27418.872000, 1200.200035, 1200.200035, 0.000000, X, Y) && !ellipse(20622.932846, 22981.601135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21998.099960, 23299.041748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25269.970000, 24818.194000, 1074.616031, 1074.616031, 0.000000, X, Y) && !ellipse(33235.164978, 30947.867859, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Apr 10 16:55:27 2012] Writing fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src3.gif
[Tue Apr 10 16:55:28 2012] ../../xmm0500750101/products/events/fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0500750101/products/events/fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Tue Apr 10 16:55:28 2012] Mean detx,y = (280.48, -177.19) 
[Tue Apr 10 16:55:28 2012] ../../xmm0500750101/products/images/fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src3_src.img and ../../xmm0500750101/products/images/fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Tue Apr 10 16:55:28 2012] ../../xmm0500750101/products/spectra/fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0500750101/products/spectra/fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Tue Apr 10 16:55:28 2012] Setting source spectrum file to fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Apr 10 16:55:28 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Apr 10 16:55:28 2012] ../../xmm0500750101/products/lightcurves/fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0500750101/products/lightcurves/fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Tue Apr 10 16:55:34 2012] fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src3.rmf exists, delete to re-create
[Tue Apr 10 16:55:34 2012] fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src3.arf exists, delete to re-create
[Tue Apr 10 16:58:23 2012] Updating aperture counts using extracted products
[Tue Apr 10 16:58:23 2012] Error reading totcts from fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Apr 10 16:58:24 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 16:58:24 2012] Using photon index=1.80, rate=0.169, arf fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src3.arf
[Tue Apr 10 16:58:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 16:58:24 2012] Updating source flux to 1.5e-12
[Tue Apr 10 16:59:19 2012] Reading fit data from xmm0500750101/analysis//spectral/fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src3_pl.csv
[Tue Apr 10 16:59:19 2012] Spectral fit parameter nH value = 1.17108e+21
[Tue Apr 10 16:59:19 2012] Spectral fit parameter PhoIndex value = 3.06435
[Tue Apr 10 16:59:19 2012] Failed to get F(0.3-8.0) from xmm0500750101/analysis//spectral/fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Tue Apr 10 16:59:19 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 16:59:19 2012] Using Nh = 1.2e+21, photon index=3.06, rate=0.169, arf fullrun_mos1_xmm0500750101_pi300-10000_pass1_cl_src3.arf
[Tue Apr 10 16:59:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 16:59:20 2012] Updating source flux to 1.1e-12