[Tue Apr 10 21:05:45 2012] Detection parameters:
  Position = (337.9, 301.7) = 20 34 39.89 60 8 23.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.2 +/- 16.3
  Background counts = 72.6
  Rate = 0.002 +/- 0.0006

[Tue Apr 10 21:05:45 2012] Off-axis axis estimate = 2.87'
[Tue Apr 10 21:06:07 2012] Using EEF radius (= 7.87 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 21:06:07 2012] Initial guess for spatial extent in simple fitting = 7.87"
[Tue Apr 10 21:06:07 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.938
[Tue Apr 10 21:06:07 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 7.87"
[Tue Apr 10 21:06:09 2012] fullrun_pn_xmm0500730201_pi300-10000_cl_pass0_src45.ximg exists
[Tue Apr 10 21:06:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500730201_pi300-10000_cl_pass0_src45.csv
[Tue Apr 10 21:06:09 2012] fullrun_pn_xmm0500730201_pi300-10000_cl_pass0_src45_1.ximg exists
[Tue Apr 10 21:06:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500730201_pi300-10000_cl_pass0_src45.csv
[Tue Apr 10 21:06:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500730201_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500730201_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:06:09 2012] fullrun_pn_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Tue Apr 10 21:06:09 2012] fullrun_pn_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Tue Apr 10 21:06:09 2012] Fit fullrun_pn_xmm0500730201_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Tue Apr 10 21:06:20 2012] Spatial fit model total counts = 1507.070000, observed total counts = 1257.000000
[Tue Apr 10 21:06:20 2012] Poor agreement between spatial fit and data for source 45
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Apr 10 21:06:20 2012] Source 45 is offset by 6.217284 and 3.731386 pixels which is larger than
2 X fitted extent = 1.519122 x 1.519122, not incorporating fit results
[Tue Apr 10 21:06:20 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 21:06:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 21:06:20 2012] Assessing source extent using major
[Tue Apr 10 21:06:20 2012] Source does appear to be extended
[Tue Apr 10 21:06:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 21:06:20 2012] Source is confused with source 44
[Tue Apr 10 21:06:38 2012] Using EEF radius (= 7.87 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 21:06:38 2012] Initial guess for spatial extent in simple fitting = 7.87"
[Tue Apr 10 21:06:38 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.938
[Tue Apr 10 21:06:38 2012] Giving source the simple spatial ID 44 for pass 1, mean size = 7.87"
[Tue Apr 10 21:06:39 2012] fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_src44.ximg exists
[Tue Apr 10 21:06:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_src44.csv
[Tue Apr 10 21:06:39 2012] fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_src44_1.ximg exists
[Tue Apr 10 21:06:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_src44.csv
[Tue Apr 10 21:06:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 21:06:39 2012] fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Tue Apr 10 21:06:39 2012] fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Tue Apr 10 21:06:39 2012] Fit fullrun_pn_xmm0500730201_pi300-10000_cl_pass1_tfrozen_src44 appears to have run properly
[Tue Apr 10 21:06:49 2012] Source 45 is offset by 6.215675 and 3.735271 pixels which is larger than
2 X fitted extent = 1.462520 x 1.462520, not incorporating fit results
[Tue Apr 10 21:06:49 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 21:06:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 21:06:49 2012] Assessing source extent using major
[Tue Apr 10 21:06:49 2012] Source does appear to be extended
[Tue Apr 10 21:06:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 21:07:07 2012] XMMSAS src. selection expression = ellipse(29352.999725, 26197.526611, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Apr 10 21:07:07 2012] Not overwriting source region fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src45_src.reg
[Tue Apr 10 21:07:07 2012] Extracting stamp from image fullrun_pn_xmm0500730201_pi300-10000_cl_sm2.00.img.gz, (300, 264) - (375, 339)
[Tue Apr 10 21:07:07 2012] XMMSAS bgd. selection expression = annulus(29352.999725, 26197.526611, 1087.500000, 2175.000000, X, Y) && !ellipse(27484.677600, 27172.583600, 453.442413, 453.442413, 0.000000, X, Y) && !ellipse(29859.478424, 27714.857269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31452.610168, 27249.778442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26687.939728, 27881.380707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26849.372000, 26415.692000, 371.750411, 371.750411, 0.000000, X, Y) && !ellipse(28068.573180, 25971.048600, 428.812812, 428.812812, 0.000000, X, Y) && !ellipse(28188.628662, 27502.561127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31604.724762, 28906.877808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30168.295502, 28797.997711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27777.369934, 28556.729889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29751.193054, 27875.048462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27251.063477, 25975.499786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27204.930000, 25082.966000, 1152.792033, 1152.792033, 0.000000, X, Y)
[Tue Apr 10 21:07:07 2012] Writing fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src45.gif
[Tue Apr 10 21:07:14 2012] ../../xmm0500730201/products/events/fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src45_src.evt and ../../xmm0500730201/products/events/fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src45_bgd.evt exist, delete to re-create
[Tue Apr 10 21:07:14 2012] Mean detx,y = (2160.67, 175.64) 
[Tue Apr 10 21:07:14 2012] ../../xmm0500730201/products/images/fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src45_src.img and ../../xmm0500730201/products/images/fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src45_bgd.img exist, delete to re-create
[Tue Apr 10 21:07:14 2012] ../../xmm0500730201/products/spectra/fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src45_src_b10.pi.gz and ../../xmm0500730201/products/spectra/fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src45_bgd.pi exist, delete to re-create
[Tue Apr 10 21:07:14 2012] Setting source spectrum file to fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Tue Apr 10 21:07:14 2012] Setting bgd. spectrum file to fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Tue Apr 10 21:07:14 2012] ../../xmm0500730201/products/lightcurves/fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src45_src.lc and ../../xmm0500730201/products/lightcurves/fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src45_bgd.lc exist, delete to re-create
[Tue Apr 10 21:07:18 2012] Not generating rmf since there are only 71 counts
[Tue Apr 10 21:07:18 2012] rmf not generated due to insufficient counts
[Tue Apr 10 21:07:18 2012] fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src45.arf exists, delete to re-create
[Tue Apr 10 21:08:00 2012] Updating aperture counts using extracted products
[Tue Apr 10 21:08:00 2012] Error reading totcts from fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Tue Apr 10 21:08:00 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 21:08:00 2012] Using photon index=1.80, rate=0.00249, arf fullrun_pn_xmm0500730201_pi300-10000_pass1_cl_src45.arf
[Tue Apr 10 21:08:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 21:08:00 2012] Updating source flux to 6.2e-15
[Tue Apr 10 21:08:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting